Hi Ludolf ,
Sorry for my previous typing mistake , There is *no* firewall rules between any of my 3 servers
My problem is when I open webmail with https:// and compose any email and click on send button then page is getting expire and I am getting logout. Kindly note that my other webmail pages with https:// are working properly.
Where as with http:// the compose email and send works properly without any problem.
That is if I open the webmail vai stunnel https config then only problem comes. So I am searching solution and config option with the same.
Let me know if any config info require from my end. I am checking out with the option which you have suggested and will reply you shortly.
Regards Jayesh Shinde
On 08/08/2011 01:02 PM, Ludolf Holzheid wrote:
On Mon, 2011-08-08 12:30:03 +0530, jayesh.shinde wrote:
[..]
I checked by defining the TIMEOUTs but I am not able to figure out why the page is getting expire and I am getting logout ? There is firewall rule between any servers.
I didn't fully understand your problem, but if your secured tunnel crosses a stateful firewall (e.g. a NAT router), you might try to switch on TCP keepalive:
socket = l:SO_KEEPALIVE=1
You might also play with the TCP_KEEP* socket options.
HTH,
Ludolf
Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid@bihl-wiedemann.de D-68199 Mannheim, Germany
Hi ,
socket = l:SO_KEEPALIVE=1 not work for me. I am facing the same page expire and logout problem.
is there any other options ?
Regards Jayesh Shinde
On 08/08/2011 01:27 PM, jayesh.shinde wrote:
Hi Ludolf ,
Sorry for my previous typing mistake , There is *no* firewall rules between any of my 3 servers
My problem is when I open webmail with https:// and compose any email and click on send button then page is getting expire and I am getting logout. Kindly note that my other webmail pages with https:// are working properly.
Where as with http:// the compose email and send works properly without any problem.
That is if I open the webmail vai stunnel https config then only problem comes. So I am searching solution and config option with the same.
Let me know if any config info require from my end. I am checking out with the option which you have suggested and will reply you shortly.
Regards Jayesh Shinde
On 08/08/2011 01:02 PM, Ludolf Holzheid wrote:
On Mon, 2011-08-08 12:30:03 +0530, jayesh.shinde wrote:
[..]
I checked by defining the TIMEOUTs but I am not able to figure out why the page is getting expire and I am getting logout ? There is firewall rule between any servers.
I didn't fully understand your problem, but if your secured tunnel crosses a stateful firewall (e.g. a NAT router), you might try to switch on TCP keepalive:
socket = l:SO_KEEPALIVE=1
You might also play with the TCP_KEEP* socket options.
HTH,
Ludolf
Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid@bihl-wiedemann.de D-68199 Mannheim, Germany
stunnel-users mailing list stunnel-users@stunnel.org http://stunnel.mirt.net/mailman/listinfo/stunnel-users
-
jayesh.shinde