Hi,

I'm having the same question (and problem) as posted by khaled on Mon Jan 7 19:31:03 CET 2008, subject [stunnel-users] 2 secure sockets TCP (Server / Client).

I think I have to send data to stunnel on the client side by a write to localhost:1974 where stunnel is configured with this stunnel.conf: ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Certificate/key is needed in server mode and optional in client mode ; The default certificate is provided only for testing and should not ; be used in a production environment cert = stunnel.pem ;key = stunnel.pem

; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1

; Use it for client mode ;client = yes

; Service-level configuration [sip2s] accept = 1975 connect = 127.0.0.1:1974

To start stunnel only works with just stunnel. Started from batch or in dos-box with the options -d -r etc. as explained in the documentation does not work, error message: file not found) BTW: I'm using Windows XP Professional on both client and server. Client IP = 10.4.208.159, server IP = 10.4.208.102 for a test set-up.

On the server side it gives the same error when started with options. stunnel.conf on the server is this: ; Sample stunnel configuration file by Michal Trojnara 2002-2006 ; Some options used here may not be adequate for your particular configuration ; Certificate/key is needed in server mode and optional in client mode ; The default certificate is provided only for testing and should not be used in a production environment cert = stunnel.pem ;key = stunnel.pem

; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1

; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log

; Use it for client mode client = yes

; Service-level configuration [sip2s] accept = 1975 connect = 127.0.0.1:1974

Reading data on TCP/IP 1974 does not display anything when the client is sending data to localhost:1974 which is encrypted by stunnel an forwarded on TCP/IP 1975. At least that is my intention, but something I do is wrong. Data sending unencrypted between client an server works fine, so connection is possible.

Any idea what I should do to let it work like this: - a client sends data to a server and reads the response from this server. - all data on the network between client an server should be encrypted. As far as I could find in the stunnel manual it should be able to use stunnel for this. In the manual is an example using foo (client) and bar (server).

Dick van Fulpen | Senior Software Engineer | Infor | Tel:+31 (0)73 6205 222 | Dick.vanFulpen@infor.com | Infor | Postbus 2067 | 5202 CB 's-Hertogenbosch | Nederland | Bezoek onze website www.vubis-smart.com |