A few days ago, sent an email in regards to a CRM program attempting to access GMail where no port number definitions are possible.  That email (or part of it) is below, but after a bit more diag, I found that the email client was communicating with stunnel, but was not getting past that to GMail (or stunnel was not getting to GMail, not sure how to tell).   I also realized that the settings of this application are similar to Outlook Express - email server defined, but no ability to specify port number.   Does anyone have stunnel working with Outlook Express?  I have a feeling the stunnel settings for that would be similar to what I need.   Thanks, and the original email is below   I am attempting to send/receive to GMail through a CRM program (contains email client) called ACT! (http://www.act.com)  ACT! only allows server addresses in the program configuration, NOT port numbers.  (e.g. smtp.gmail.com or 127.0.0.1 - nothing else)   I have configured stunnel 4.26 as such:   ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [pop] accept = localhost:110 connect = pop.gmail.com:995 [smtp] accept = localhost:25 connect = smtp.gmail.com:465   and in ACT as such: SMTP as localhost POP as localhost   (also have tried 127.0.0.1, but with no difference).   Richard Brust richard_brust@yahoo.com