Re: stunnel 5.61transfer() loop executes not transferring any data Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket inetd mode
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Mike, Good job! Stunnel 5.62 beta 1 work fine! """ 2022.01.16 22:08:47 LOG6[ui]: Initializing inetd mode configuration 2022.01.16 22:08:47 LOG5[ui]: stunnel 5.62 on i586-slackware-linux-gnu platform 2022.01.16 22:08:47 LOG5[ui]: Compiled/running with OpenSSL 1.1.1m 14 Dec 2021 2022.01.16 22:08:47 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,OCSP,PSK,SNI Auth:LIBWRAP 2022.01.16 22:08:47 LOG6[ui]: Initializing inetd mode configuration 2022.01.16 22:08:47 LOG5[ui]: Reading configuration from file /etc/stunnel/imaps.conf 2022.01.16 22:08:47 LOG5[ui]: UTF-8 byte order mark not detected 2022.01.16 22:08:47 LOG5[ui]: FIPS mode disabled 2022.01.16 22:08:47 LOG6[ui]: Compression enabled: 0 methods 2022.01.16 22:08:47 LOG6[ui]: stunnel default security level set: 2 2022.01.16 22:08:47 LOG6[ui]: Session resumption enabled 2022.01.16 22:08:47 LOG6[ui]: Loading certificate from file: /etc/stunnel/stunnel.pem 2022.01.16 22:08:47 LOG6[ui]: Certificate loaded from file: /etc/stunnel/stunnel.pem 2022.01.16 22:08:47 LOG6[ui]: Loading private key from file: /etc/stunnel/stunnel.pem 2022.01.16 22:08:47 LOG6[ui]: Private key loaded from file: /etc/stunnel/stunnel.pem 2022.01.16 22:08:47 LOG6[ui]: DH initialization needed for DHE-RSA-AES256-GCM-SHA384 2022.01.16 22:08:47 LOG6[ui]: 4096-bit DH parameters loaded 2022.01.16 22:08:47 LOG5[ui]: Configuration successful 2022.01.16 22:08:47 LOG5[0]: Service [stunnel] accepted connection from 10.19.79.235:41136 2022.01.16 22:08:47 LOG6[0]: Peer certificate not required 2022.01.16 22:08:47 LOG6[0]: No peer certificate received 2022.01.16 22:08:47 LOG6[0]: Session id: 65640462303D0DA1CD16CAB4977F22B04FFB74693150104FC69AB9FBDC48AED9 2022.01.16 22:08:47 LOG6[0]: No peer certificate received 2022.01.16 22:08:47 LOG6[0]: Session id: B9505D917FA6F2E9C8A0EF14D6E4B01C3ED54599271D93E325ED7412CA2AC5F3 2022.01.16 22:08:47 LOG6[0]: TLS accepted: new session negotiated 2022.01.16 22:08:47 LOG6[0]: TLSv1.3 ciphersuite: TLS_AES_256_GCM_SHA384 (256-bit encryption) 2022.01.16 22:08:47 LOG6[0]: Peer temporary key: X25519, 253 bits 2022.01.16 22:08:47 LOG6[0]: Local mode child started (PID=16984) 2022.01.16 22:08:47 LOG6[0]: TLS closed (SSL_read) 2022.01.16 22:08:47 LOG6[0]: Read socket closed (readsocket) 2022.01.16 22:08:47 LOG6[0]: SSL_shutdown successfully sent close_notify alert 2022.01.16 22:08:47 LOG5[0]: Connection closed: 979 byte(s) sent to TLS, 128 byte(s) sent to socket """ Thanks a lot! - -Roberto -----BEGIN PGP SIGNATURE----- iEYEARECAAYFAmHkjDoACgkQWVOoL214ZeGntwCbBtV1G/J2uThR06ftFC+F2XTP KeQAnjnCTOrk26zzcsNsCOQoWg54MWhD =alm2 -----END PGP SIGNATURE----- ----- Original Message ----- Sent: Sunday, January 16, 2022 9:52 PM Michał Trojnara wrote:
Hi Roberto,
Could you try https://www.stunnel.org/downloads/beta/stunnel-5.62b1.tar.gz ?
Best regards, Mike
Hi Roberto, Thank you for testing. I'm going to issue a bugfix release today or tomorrow. Best regards, Mike On 16/01/2022 22:27, Roberto CORRADO wrote:
Hi Mike, Good job! Stunnel 5.62 beta 1 work fine!
""" 2022.01.16 22:08:47 LOG6[ui]: Initializing inetd mode configuration 2022.01.16 22:08:47 LOG5[ui]: stunnel 5.62 on i586-slackware-linux-gnu platform 2022.01.16 22:08:47 LOG5[ui]: Compiled/running with OpenSSL 1.1.1m 14 Dec 2021 2022.01.16 22:08:47 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,OCSP,PSK,SNI Auth:LIBWRAP 2022.01.16 22:08:47 LOG6[ui]: Initializing inetd mode configuration 2022.01.16 22:08:47 LOG5[ui]: Reading configuration from file /etc/stunnel/imaps.conf 2022.01.16 22:08:47 LOG5[ui]: UTF-8 byte order mark not detected 2022.01.16 22:08:47 LOG5[ui]: FIPS mode disabled 2022.01.16 22:08:47 LOG6[ui]: Compression enabled: 0 methods 2022.01.16 22:08:47 LOG6[ui]: stunnel default security level set: 2 2022.01.16 22:08:47 LOG6[ui]: Session resumption enabled 2022.01.16 22:08:47 LOG6[ui]: Loading certificate from file: /etc/stunnel/stunnel.pem 2022.01.16 22:08:47 LOG6[ui]: Certificate loaded from file: /etc/stunnel/stunnel.pem 2022.01.16 22:08:47 LOG6[ui]: Loading private key from file: /etc/stunnel/stunnel.pem 2022.01.16 22:08:47 LOG6[ui]: Private key loaded from file: /etc/stunnel/stunnel.pem 2022.01.16 22:08:47 LOG6[ui]: DH initialization needed for DHE-RSA-AES256-GCM-SHA384 2022.01.16 22:08:47 LOG6[ui]: 4096-bit DH parameters loaded 2022.01.16 22:08:47 LOG5[ui]: Configuration successful 2022.01.16 22:08:47 LOG5[0]: Service [stunnel] accepted connection from 10.19.79.235:41136 2022.01.16 22:08:47 LOG6[0]: Peer certificate not required 2022.01.16 22:08:47 LOG6[0]: No peer certificate received 2022.01.16 22:08:47 LOG6[0]: Session id: 65640462303D0DA1CD16CAB4977F22B04FFB74693150104FC69AB9FBDC48AED9 2022.01.16 22:08:47 LOG6[0]: No peer certificate received 2022.01.16 22:08:47 LOG6[0]: Session id: B9505D917FA6F2E9C8A0EF14D6E4B01C3ED54599271D93E325ED7412CA2AC5F3 2022.01.16 22:08:47 LOG6[0]: TLS accepted: new session negotiated 2022.01.16 22:08:47 LOG6[0]: TLSv1.3 ciphersuite: TLS_AES_256_GCM_SHA384 (256-bit encryption) 2022.01.16 22:08:47 LOG6[0]: Peer temporary key: X25519, 253 bits 2022.01.16 22:08:47 LOG6[0]: Local mode child started (PID=16984) 2022.01.16 22:08:47 LOG6[0]: TLS closed (SSL_read) 2022.01.16 22:08:47 LOG6[0]: Read socket closed (readsocket) 2022.01.16 22:08:47 LOG6[0]: SSL_shutdown successfully sent close_notify alert 2022.01.16 22:08:47 LOG5[0]: Connection closed: 979 byte(s) sent to TLS, 128 byte(s) sent to socket """
Thanks a lot!
-Roberto
----- Original Message ----- Sent: Sunday, January 16, 2022 9:52 PM Michał Trojnara wrote:
Hi Roberto,
Could you try https://www.stunnel.org/downloads/beta/stunnel-5.62b1.tar.gz ?
Best regards, Mike
stunnel-users mailing list -- stunnel-users@stunnel.org To unsubscribe send an email to stunnel-users-leave@stunnel.org
participants (2)
-
Michał Trojnara -
Roberto CORRADO