Craig, Thanks. Are you advising that I put "client = yes" in the service declaration rather than the main configuration? I already have "client = yes" on the client side (in the main configuration) and that line commented out of the server's configuration (I assume the default is client = no). When I review the log on the client computer, I can see where it times out waiting on a response from the work firewall's outside IP address. I do not see any connection attempts on the server side and both stunnel instances (client and server) have debug = 7 and logging to stunnel.log. Richard

-----Original Message----- From: stunnel-users-bounces@mirt.net [mailto:stunnel-users- bounces@mirt.net] On Behalf Of Richard Woodman Sent: 26 November 2007 07:44 AM To: stunnel-users@mirt.net Subject: [stunnel-users] More questions on RDP and port forwarding

I did read through the archives but I cannot determine how to get Stunnel working through the firewall. Here is what I wish to do:

1. Tunnel Windows Remote Desktop through stunnel. 2. I wish to connect from home to work; I have access to the firewall at work.

Here's what I've done:

1. Installed stunnel on Windows XP at home and at work. I have self- signed certificates and am using verify = 3 (on both computers). Cacert.pem has the CA cert, the work cert, and the home cert in a single file. The server-cert.pem has the work computer's key and cert while the client-1-cert.pem (home computer) has it's own key and cert. 2. Stunnel at home has client = yes, stunnel at work has this commented out. Stunnel at work will become a "server" where multiple clients connect via stunnel and that single computer makes multiple RDP connections.

Client (home) computer has

Try changing the client config to the following: [rdp1] client = yes accept = 4391 connect = <work outside interface IP>:44391

Server (work) computer has

[rdp2] accept = 44391 connect = <work computer name>:3392

If I try this at work from within the corporate network (change the client connect string to the stunnel server's IP or hostname), then everything works fine. However, once I try from outside the work network, nothing works. Firewall is a Watchguard SOHO 6tc and I have a inbound rule permitting 44391 and directing it to X.X.X.52 (the stunnel server). I also have other rules allowing RDP (on port 3392 for instance) directly to the computer I wish to control and those rules work. Essentially, RDP directly through the firewall works but stunnel through the firewall does not. I assume there is no traffic destined for .52 on 44391 because the log file on the server (with debug = 7) only shows the startup sequence and port binding (netstat -a shows I am listening on 44391). I also tried this at home on my Juniper 5XT and was unsuccessful. Please help.

Richard

_______________________________________________ stunnel-users mailing list stunnel-users@mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users

Cheers, Craig