Hi All I'm a relative newbie to Stunnel, and am trying to set up a tunnel so I can Remote Desktop from work to my PC/server at home. I'm using versions 4.20 of the Windows binaries. I've tested the configuration and it works from home using a laptop that is going through my firewall when I enter my domain home (so my firewall is set up correctly). I tried a variety of common ports and got the same response every time. I had to use the 127.0.0.2 on the client because Remote Desktop didn't want me connecting to myself... When I try if from work I get a dialog box: The client could not establish a connection to the remote computer. The most likely causes for this error are: 1) Remote connections might not be enabled at the remote computer. 2)The maximum number of connections was exceeded at the remote computer. 3) A network error occurred while establishing the connection. My config is as follows: #Client ;cert = stunnel.pem ;key = stunnel.pem ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client = yes ; Service-level configuration [https-RDT] accept = 127.0.0.2:3389 connect = xx.xx.xx.xx:1494 #Server ; Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 ; Some debugging stuff useful for troubleshooting debug = 7 output = stunnel.log ; Use it for client mode client = no ; Service-level configuration [https-RDT] accept = 1494 connect = localhost:3389 Is there something I need to do to traverse this proxy? Any help would be greatly appreciated! -- View this message in context: http://www.nabble.com/Using-stunnel-for-RDP---Proxy---Firewall-tf4654985.htm... Sent from the Stunnel - Users mailing list archive at Nabble.com.