stunnel-users

stunnel-users@stunnel.org

6 participants
3313 discussions

Amount of FD's per connection
by Koornstra, Reinoud 21 Nov '08

21 Nov '08

Hi, I am using stunnel compiled to use threads. I read in the faq that a connection may use 1 to 4 fd's per connection. Normally this is only one, how can I influence this, I mean making sure there is one fd per connection? I also wish to limit the amount of max connections at the same time. Perhaps the most easy way is limit the amount of fd's per process with ulimit. However, depending on how many fd's are needed per connection it is difficult to set right now. Kind Regards, Reinoud.

2 2

xforwardedfor patch for 4.26?
by Chris Charman 19 Nov '08

19 Nov '08

Has anyone done such a thing? Alternately, are there good instructions someplace for setting up transparent proxy?

1 0

Re: [stunnel-users] Cannot connect to SBC/yahoo to send (or telnet)
by James Moe 19 Nov '08

19 Nov '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 11/19/08 03:20 am, kith walls wrote: > When connecting to SBC/Yahoo you need to front the session with HTTP. > I am not clear what you mean. Would you give an example? >> Hello, >> Stunnel v4.20. >> When connecting to SBC/Yahoo, the session is > terminated >> with a "bad certificate" message. See the > log below. The tech folks claim >> all is well at their end. >> Is there something I am missing here? >> Here is the conf file: > - -- jimoe (at) sohnen-moe (dot) com -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (OS/2) iD8DBQFJJEsmzTcr8Prq0ZMRAjiTAJ9n/nZO2zaZemqvsU2Y1ge30OYdJQCeN3Oc Wj0dFPjjSH7qbV5d5L/F3ck= =ijQ0 -----END PGP SIGNATURE-----

1 0

Proxy support in configuration file?
by Reinier van der Gugten 19 Nov '08

19 Nov '08

Is there proxy support for Stunnel, and if so, how do I specify the proxy server in the configuration file? If it is not supported, can you give me a price estimate on what it would cost to add it? Greetings, Reinier. E.g. I want to connect to an external location at: Myserver.com:443 The proxy is at: CustomerProxy:8080 And my application runs at the customer talking to: localhost:1433 The proxy does not require authentication. Looking at the docuemtation you linked me I found this example: CONNECT server.example.com:80 HTTP/1.1 Host: server.example.com:80 Proxy-Authorization: basic aGVsbG86d29ybGQ= Using my addresses, where goes what? CONNECT CustomerProxy:8080 HTTP/1.1 Host: Myserver.com:443 // Proxy-Authorization: basic aGVsbG86d29ybGQ= Kind regards, Reinier -----Original Message----- From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Michal Trojnara Sent: vrijdag 14 november 2008 15:04 To: stunnel-users(a)mirt.net Subject: Re: [stunnel-users] Proxy support On Fri, 14 Nov 2008 14:53:20 +0100, "Reinier van der Gugten" <info(a)rgit.eu> wrote: > Has someone got a working version of STunnel that can handle a proxy? Do you mean client mode CONNECT protocol support (RFC 2817 section 5.2)? http://www.ietf.org/rfc/rfc2817.txt It's supported in stunnel since version 4.15 (released 2006.03.11). Best regards, Mike _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users

2 1

stunnel and expiring CRLs
by Jason Haar 19 Nov '08

19 Nov '08

Hi there Is stunnel capable of re-reading updated CRLs on the fly? Without needing to be restarted? I have tried both CRLfile and CRLpath (with the hashes) with no luck. It appear stunnel only reads them on startup and never refers to them again? There also seems to be no option to send a HUP or the like to force a re-read - only a full restart will make stunnel re-read the CRLs. i.e. our system works after a fresh restart until the original CRL expires, and then stunnel starts rejecting new connections with "Found CRL is expired - revoking all certificates until you get updated CRL" - even though there have been several CRL file (and hash) updates in between. Restarting stunnel makes it start working again. I've googled around and see several other people have asked similar questions over the years, and there are references by Michal Trojnara that it should work? This is stunnel-4.14-2 under CentOS5 with openssl-0.9.8b-8.3.el5_0.2. No chroot jail Thanks! -- Cheers Jason Haar Information Security Manager, Trimble Navigation Ltd. Phone: +64 3 9635 377 Fax: +64 3 9635 417 PGP Fingerprint: 7A2E 0407 C9A6 CAF6 2B9F 8422 C063 5EBB FE1D 66D1

4 5

Connection rejected: too many clients (>=500)?
by Chris Charman 18 Nov '08

18 Nov '08

Hey folks -- Can anyone tell me where the max number of clients is configured in 4.21? I'm running okay for a while, but then I end up with repeated messages as below in the logs: 2008.11.18 19:13:33 LOG7[26491:46912520933328]: https accepted FD=512 from xx.xx.xx.xx:xxxxx 2008.11.18 19:13:33 LOG4[26491:46912520933328]: Connection rejected: too many clients (>=500) 2008.11.18 19:13:33 LOG7[26491:46912520933328]: https accepted FD=512 from xx.xx.xx.xx:xxxxx 2008.11.18 19:13:33 LOG4[26491:46912520933328]: Connection rejected: too many clients (>=500) 2008.11.18 19:13:33 LOG7[26491:46912520933328]: https accepted FD=512 from xx.xx.xx.xx:xxxxx 2008.11.18 19:13:33 LOG4[26491:46912520933328]: Connection rejected: too many clients (>=500) [...] I've only seen reports of this problem, but no solution. Anyone out there who can help? Thanks in advance! -Chris ------------- Config below ----------------- ulimit unlimited stunnel -version stunnel 4.21 on x86_64-pc-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /var/run/stunnel4.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /etc/stunnel/stunnel.pem session = 300 seconds sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none uname -a Linux domU-12-31-39-01-61-B2 2.6.21.7-2.fc8xen #1 SMP Fri Feb 15 12:34:28 EST 2008 x86_64 GNU/Linux stunnel -sockets Socket option defaults: Option Accept Local Remote OS default SO_DEBUG -- -- -- 0 SO_DONTROUTE -- -- -- 0 SO_KEEPALIVE -- -- -- 0 SO_LINGER -- -- -- 0:0 SO_OOBINLINE -- -- -- 0 SO_RCVBUF -- -- -- 87380 SO_SNDBUF -- -- -- 16384 SO_RCVLOWAT -- -- -- 1 SO_SNDLOWAT -- -- -- 1 SO_RCVTIMEO -- -- -- 0:0 SO_SNDTIMEO -- -- -- 0:0 SO_REUSEADDR 1 -- -- 0 SO_BINDTODEVICE -- -- -- -- IP_TOS -- -- -- 0 IP_TTL -- -- -- 64 TCP_NODELAY -- -- -- 0 gcc -v Using built-in specs. Target: x86_64-linux-gnu Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.2 --program-suffix=-4.2 --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --enable-mpfr --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7) openssl version OpenSSL 0.9.8g 19 Oct 2007

2 2

Re: [stunnel-users] Cannot connect to SBC/yahoo to send (or telnet)
by James Moe 18 Nov '08

18 Nov '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 11/18/08 10:17 am, James Moe wrote: > Hello, > Stunnel v4.20. > When connecting to SBC/Yahoo, the session is terminated > with a "bad certificate" message. See the log below. The tech folks claim > all is well at their end. > Is there something I am missing here? > Here is the conf file: > My apologies. I lost control of the email program and it sent this message here instead of to a local host. - -- jimoe (at) sohnen-moe (dot) com -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (OS/2) iD8DBQFJIvmqzTcr8Prq0ZMRAsb2AJ9ROwt9FH4GpfyNWQ020rpGmC7K/wCdGhdW Bs96qyJjjXSA9d+AwVktAac= =+UNT -----END PGP SIGNATURE-----

1 0

Proxy support
by Reinier van der Gugten 18 Nov '08

18 Nov '08

Oops.. That's exactly what I meant... However What is the correct configuration in that case? E.g. I want to connect to an external location at: Myserver.com:443 The proxy is at: CustomerProxy:8080 And my application runs at the customer talking to: localhost:1433 The proxy does not require authentication. Looking at the docuemtation you linked me I found this example: CONNECT server.example.com:80 HTTP/1.1 Host: server.example.com:80 Proxy-Authorization: basic aGVsbG86d29ybGQ= Using my addresses, where goes what? CONNECT CustomerProxy:8080 HTTP/1.1 Host: Myserver.com:443 // Proxy-Authorization: basic aGVsbG86d29ybGQ= Kind regards, Reinier -----Original Message----- From: stunnel-users-bounces(a)mirt.net [mailto:stunnel-users-bounces@mirt.net] On Behalf Of Michal Trojnara Sent: vrijdag 14 november 2008 15:04 To: stunnel-users(a)mirt.net Subject: Re: [stunnel-users] Proxy support On Fri, 14 Nov 2008 14:53:20 +0100, "Reinier van der Gugten" <info(a)rgit.eu> wrote: > Has someone got a working version of STunnel that can handle a proxy? Do you mean client mode CONNECT protocol support (RFC 2817 section 5.2)? http://www.ietf.org/rfc/rfc2817.txt It's supported in stunnel since version 4.15 (released 2006.03.11). Best regards, Mike _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users

1 1

Re: [stunnel-users] Help - Getting stunnel compiled on windows and using a patch
by Reinier van der Gugten 14 Nov '08

14 Nov '08

Thanks so mucht for this information! I had to make the folowing changes as well: Set the Compile with common language runtime to: No common language runtime support for each .h file If I do that, the error: Command line error D8045: cannot compile C file 'src\client.c' with the /clr option disappears (Next I got an error in the resouce.rc file with the LTEXT VERSION... So I // that out) Next I get about 121 errors, like: Error LNK2001: unresolved external symbol _main ... symbol _num_clients etc. Any ideas? Kind regards, Reinier ________________________________ From: DMILE525 [mailto:dmile525@gmail.com] Sent: donderdag 13 november 2008 23:23 To: Reinier van der Gugten Subject: Re: [stunnel-users] Help - Getting stunnel compiled on windows and using a patch on Windows: install Win32 OpenSSL http://www.slproweb.com/products/Win32OpenSSL.html <wlmailhtml:{86BCE398-B6B8-40AD-8A3D-BE759753A203}mid://00000009/!x-usc: http://www.slproweb.com/products/Win32OpenSSL.html> install VS2008 (I'm using free VS2008 C++ Express Edition http://www.microsoft.com/express/download/ <wlmailhtml:{86BCE398-B6B8-40AD-8A3D-BE759753A203}mid://00000009/!x-usc: http://www.microsoft.com/express/download/> ) The first thing to do (assuming a default installation of 'C:\OpenSSL') is to go to 'C:\OpenSSL\lib\VC' and copy all of the files to your Visual C++ 'lib' directory. This directory is sometimes located in a somewhat cryptic location such as 'C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\lib' or 'C:\Program Files\Microsoft Visual Studio 9.0\VC\lib'. Next, copy everything in the 'C:\OpenSSL\include' directory to your Visual C++ 'include' directory. create new empty project add to project: stunnel.c ssl.c ctx.c verify.c file.c client.c protocol.c sthreads.c log.c options.c network.c resolver.c gui.c common.h prototypes.h resources.h stunnel.ico resources.rc "Configuration properties -> Linker -> input -> additional properties" add wsock32.lib ssleay32.lib libeay32.lib "Configuration properties -> General -> character set" set "Use Multi-Byte Character Set" in common.h after #ifndef COMMON_H #define COMMON_H add #define USE_WIN32 #define _CRT_SECURE_NO_DEPRECATE #define _CRT_NONSTDC_NO_DEPRECATE //#define HAVE_GETADDRINFO //#define HAVE_GETNAMEINFO #ifndef _MBCS #define _MBCS #endif #define VERSION "4.26" #if defined _M_IX86 #pragma comment(linker, "/manifestdependency:\"type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='x86' publicKeyToken='6595b64144ccf1df' language='*'\"") #elif defined _M_IA64 #pragma comment(linker, "/manifestdependency:\"type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='ia64' publicKeyToken='6595b64144ccf1df' language='*'\"") #elif defined _M_X64 #pragma comment(linker, "/manifestdependency:\"type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='amd64' publicKeyToken='6595b64144ccf1df' language='*'\"") #else #pragma comment(linker, "/manifestdependency:\"type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'\"") #endif On Wed, Nov 12, 2008 at 6:50 PM, Reinier van der Gugten <info(a)rgit.eu> wrote: Hello, I am trying to compile STunnel. I'd rather not, but the pre-compiled version does not support a proxy server. So I hop you will be able to help me, or point me to a good howto on how to compile stunnel using windows and a patch from the patch-list. Or does someone have a compiled (windows) version with proxy support? If so, please mail it to me. Or tell me where to find more detailed information pls. - Next thing I will try is to install linux on a computer in order to try it that way... Greetings, Reinier. _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users

2 2

Strange CRL verification behaviour
by Christophe Nanteuil 03 Nov '08

03 Nov '08

With stunnel 4.26 (or ealier), in order to verify revocation of clients' certificates, I use this configuration file : -------------------8<------------------ CAfile=/etc/ssl/stunnel/ca_certs.pem CRLfile=/etc/ssl/stunnel/crl.pem cert=/etc/ssl/stunnel/server.pem key=/etc/ssl/stunnel/server.key sslVersion=TLSv1 verify=2 [WEB] accept=8080 connect=127.0.0.1:3128 ------------------->8------------------ 1/ If there is no CRLfile when stunnel starts, stunnel dies and logs show "Failed to load /etc/ssl/stunnel/crl.pem revocation lookup file" -> ok. 2/ If the CRLfile is correct, stunnel starts. When the CRL expires, stunnel rejects any new connection. Logs then show : " Found CRL is expired - revoking all certificates until you get updated CRL" -> ok 3/ If the CRLfile is not a valid CRL, stunnel starts and ignores the CRLfile. Then, for any new connection, logs show "CRL: verification passed". -> NOT ok, IMO. examples of wrong CRLs : a CRL issued by an unknown CA or a certificate in the PEM format. This can happen when the CRL expires (soon) and the administrator puts a "new one" but misfits files. He then restarts stunnel, which works. This behaviour can be annoying because the logs of CRL are now in level 6 (INFO) and not any more in level 5 (NOTICE). My configuration was in debug=5 and logs showed only "CRL: verification passed", I could not determine what CRL was really used. I propose the attached patch to modify behaviour in case 3/, ie if no CRL corresponding to the issuer of each certificate of the chain is found : - reject connection if CRLdir or CRLfile was specified in the config file - accept connection but warn in logs if the use of CRL was not explicitly set in the config file. NB : the source code of function "crl_check" shows "/* based on BSD-style licensed code of mod_ssl */". I looked into the code of "mod_ssl-2.8.31-1.3.41" (file pkg.sslmod/ssl_engine_kernel.c, line 1601-1769) and there is actually the same behaviour. -- Christophe Nanteuil

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users