- stunnel-users - stunnel.org

Pass IP Attn: Alexander Lazic
by tbrown2376＠adelphia.net 10 Apr '05

10 Apr '05

Attn: Alexander Lazic Can you please send me the patch for: patch for HTTP => X-Forwarded-For Header to: tbrown2376(a)adelphia.net Thanks. On Die 29.03.2005 11:00, Tim Brown wrote: >I am running Stunnel version 4.07 on a Windows 2000 server. Is there >any way to pass the originating IP through Stunnel to my server >application? As it is now Stunnel is passing the server IP for all >requests. I have send a patch for HTTP => X-Forwarded-For Header to the list. al ;-)

3 4

Pass IP Attn: Alexander Lazic
by Tim Brown 09 Apr '05

09 Apr '05

Alexander Lazic Can you please send me the patch for: patch for HTTP => X-Forwarded-For Header to: tbrown2376(a)adelphia.net Thanks. On Die 29.03.2005 11:00, Tim Brown wrote: >I am running Stunnel version 4.07 on a Windows 2000 server. Is there >any way to pass the originating IP through Stunnel to my server >application? As it is now Stunnel is passing the server IP for all >requests. I have send a patch for HTTP => X-Forwarded-For Header to the list. al ;-) Tim Brown VP Network Services Florida Telco Credit Union Ph: 904.723.6315 Toll Free: 800.342.2352 ext. 6315 Fax: 904.722.6615 <mailto:tbrown@floridatelco.org> tbrown(a)floridatelco.org Confidentiality Notice: This email may contain confidential and privileged material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, be advised that any unauthorized disclosure, copying, distribution, or the taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this email in error, please immediately delete this message and attachments (including all copies) and notify the sender by return e-mail or by phone at 904.723.6300.

3 3

stunnel and NNTP on windows - best practices
by Sir Thanksalot 08 Apr '05

08 Apr '05

Hi all, I am trying to use stunnel for SSL access to a NNTP newserver and found quite a few pages that list ways of doing that. I personally am using xnews as my newsreader, and I have seen variations of the same instructions with different software (Agent, Free Agent for newsreaders, Pegasus Mail as your mail application etc.). For completeness sake, here are some of the ones that I've found - http://www.cotse.net/users/putty/ssl (for Xnews and stunnel 4.x) http://www.geocities.com/d4vidb/x_setup13.html (for Xnews and stunnel 3.x - doesn't use the stunnel.conf file necessary in stunnel 4.x) http://www.noderunner.net/~llin/old/nntp-ssl.html (for a newsreader and stunnel 3.x. It also has links to a stunnel.conf file for stunnel 4.x users) In all these instructions (whether using the stunnel 3.x commandline options or using the stunnel.conf file for stunnel 4.x), I haven't seen any instructions about creating any certificates or public/private keys or a passphrase. Also there doesn't seem to be any writeup on what algorithm actually ends up getting used or even a way to pick which algorithm to use. What's the best practise for users? Should they do anything extra? Set up key pairs? Choose a default algorithm? Thanks. -- _______________________________________________ NEW! Lycos Dating Search. The only place to search multiple dating sites at once. http://datingsearch.lycos.com

1 0

TIMEOUTclose
by Joe Abbey 08 Apr '05

08 Apr '05

Background: I have been having issues getting Entourage to connect with my mail server over POP3S. Entourage will connect, communicate, and then hangs for 60 seconds. According to tcpdumps, Entourage appears to hang until a timeout. Connecting directly to the pop3 daemon, bypassing stunnel, there is no lag. Therefore something appears to be wrond with the stunnel/Entourage interaction. To get Entourage to work with POP3S and have virtually no lag, I've set in my stunnel.conf TIMEOUTclose = 2 for [pop3s]. Question: Is there any reason not to set TIMEOUTclose = 0? Thanks! Joe

1 0

Pass IP Attn: Alexander Lazic
by tbrown2376＠adelphia.net 08 Apr '05

08 Apr '05

ATTN: Alexander Lazic Can you please send me the patch for: patch for HTTP => X-Forwarded-For Header to: tbrown2376(a)adelphia.net Thanks. On Die 29.03.2005 11:00, Tim Brown wrote: >I am running Stunnel version 4.07 on a Windows 2000 server. Is there >any way to pass the originating IP through Stunnel to my server >application? As it is now Stunnel is passing the server IP for all >requests. I have send a patch for HTTP => X-Forwarded-For Header to the list. al ;-)

1 0

Compilation error on windows, cannot find "-lssl"
by Billinger Olle 07 Apr '05

07 Apr '05

Hi I'm trying to compile stunnel 4.08 on windows using mingw, with openssl-0.9.7f. I have edited the Makefile.w32 and it compiles ok until it cannot find the "-lssl". Any suggestions are welcome. //Olle ************************************** $ make -f Makefile.w32 stunnel.exe gcc -g -O2 -Wall -DUSE_WIN32 -DHAVE_OPENSSL -I/c/openssl/include -c -o stunnel.o stunnel.c gcc -g -O2 -Wall -DUSE_WIN32 -DHAVE_OPENSSL -I/c/openssl/include -c -o ssl.o ssl.c gcc -g -O2 -Wall -DUSE_WIN32 -DHAVE_OPENSSL -I/c/openssl/include -c -o client.o client.c gcc -g -O2 -Wall -DUSE_WIN32 -DHAVE_OPENSSL -I/c/openssl/include -c -o protocol.o protocol.c gcc -g -O2 -Wall -DUSE_WIN32 -DHAVE_OPENSSL -I/c/openssl/include -c -o sthreads.o sthreads.c gcc -g -O2 -Wall -DUSE_WIN32 -DHAVE_OPENSSL -I/c/openssl/include -c -o log.o log.c gcc -g -O2 -Wall -DUSE_WIN32 -DHAVE_OPENSSL -I/c/openssl/include -c -o options.o options.c gcc -g -O2 -Wall -DUSE_WIN32 -DHAVE_OPENSSL -I/c/openssl/include -c -o network.o network.c gcc -g -O2 -Wall -DUSE_WIN32 -DHAVE_OPENSSL -I/c/openssl/include -c -o resolver.o resolver.c gcc -g -O2 -Wall -DUSE_WIN32 -DHAVE_OPENSSL -I/c/openssl/include -c -o gui.o gui.c gcc -s -o stunnel.exe stunnel.o ssl.o client.o protocol.o sthreads.o log.o options.o network.o resolver.o gui.o resources.o -L/c/openssl/bin -lwsock32 -lgdi32 -lssl -mwindows c:\mingw\bin\..\lib\gcc-lib\mingw32\3.2.3\..\..\..\..\mingw32\bin\ld.exe: cannot find -lssl make: *** [stunnel.exe] Error 1 My Makefile.w32 ******************* SSLDIR=/c/openssl DEFINES=-DUSE_WIN32 -DHAVE_OPENSSL CFLAGS=-g -O2 -Wall $(DEFINES) -I$(SSLDIR)/include LDFLAGS=-s # LIBS=-L$(SSLDIR)/out -lssl -lcrypto -lwsock32 -lgdi32 LIBS=-L$(SSLDIR)/bin -lwsock32 -lgdi32 -lssl OBJS=stunnel.o ssl.o client.o protocol.o sthreads.o log.o options.o network.o resolver.o gui.o resources.o stunnel.exe: $(OBJS) $(CC) $(LDFLAGS) -o stunnel.exe $(OBJS) $(LIBS) -mwindows clean: rm *.o rm stunnel.exe #resources.o: resources.rc resources.h # windres resource.rc resources.o $(OBJS): *.h Makefile.w32 *********************

1 0

Stunnel.conf reload
by CIM Massy 05 Apr '05

05 Apr '05

Hi, is there a way, under win32, to have stunnel reload its .conf file and certificates without restarting the service ? (A kind of SIGHUP) Thanks, Phil

1 0

Stunnel and CRLs
by CIM Massy 05 Apr '05

05 Apr '05

Hi, is there a way to automagically mutually verify certificates (verify=3) and to check the certificates against a .crl file hosted on a web server ? I want my "VNC over Stunnel" host check if the incoming connexions are authorized or if the certificates have expired / been revoked. Thanks, Phil

1 0

stunnel 4.09 problem: Connection rejected: too many clients
by Steven Van Acker 04 Apr '05

04 Apr '05

Hi, after upgrading to stunnel 4.09, we are having 2 problems with it that did not exist in a previous version (our case: stunnel 4.05 without pthreads) ---[ My testsetup is as follows: * stunnel listening on port 4321, connects to localhost port 13 (daytime) * daytime is enabled in inetd * stunnel was compiled without pthreads * ulimit -u = 8192 ---[ problem 1 At first, it works fine. For every incoming connection, the process forks and data is transferred. However, when the connection is closed, the forked process remains hanging for a while (about 1 minute) and then exits. This in itself is not a real problem, except that it generates a lot of processes. (and maybe causes problem 2 ?) ---[ data and logs concerning problem 1 (process hangs for 1 minute): I run the following command: openssl s_client -connect 192.168.2.119:4321 the output follows immediately The logfile (debug = debug) looks like this: 2005.03.31 14:05:05 LOG7[4552:0]: daytime accepted FD=8 from 192.168.2.103:47200 2005.03.31 14:05:05 LOG7[4552:0]: FD 8 in non-blocking mode 2005.03.31 14:05:05 LOG7[4553:0]: daytime started 2005.03.31 14:05:05 LOG5[4553:0]: daytime connected from 192.168.2.103:47200 2005.03.31 14:05:05 LOG7[4553:0]: SSL state (accept): before/accept initialization 2005.03.31 14:05:05 LOG7[4553:0]: SSL state (accept): SSLv3 read client hello A 2005.03.31 14:05:05 LOG7[4553:0]: SSL state (accept): SSLv3 write server hello A 2005.03.31 14:05:05 LOG7[4553:0]: SSL state (accept): SSLv3 write certificate A 2005.03.31 14:05:05 LOG7[4553:0]: SSL state (accept): SSLv3 write server done A 2005.03.31 14:05:05 LOG7[4553:0]: SSL state (accept): SSLv3 flush data 2005.03.31 14:05:05 LOG7[4553:0]: SSL state (accept): SSLv3 read client key exchange A 2005.03.31 14:05:05 LOG7[4553:0]: SSL state (accept): SSLv3 read finished A 2005.03.31 14:05:05 LOG7[4553:0]: SSL state (accept): SSLv3 write change cipher spec A 2005.03.31 14:05:05 LOG7[4553:0]: SSL state (accept): SSLv3 write finished A 2005.03.31 14:05:05 LOG7[4553:0]: SSL state (accept): SSLv3 flush data 2005.03.31 14:05:05 LOG7[4553:0]: 1 items in the session cache 2005.03.31 14:05:05 LOG7[4553:0]: 0 client connects (SSL_connect()) 2005.03.31 14:05:05 LOG7[4553:0]: 0 client connects that finished 2005.03.31 14:05:05 LOG7[4553:0]: 0 client renegotiatations requested 2005.03.31 14:05:05 LOG7[4553:0]: 1 server connects (SSL_accept()) 2005.03.31 14:05:05 LOG7[4553:0]: 1 server connects that finished 2005.03.31 14:05:05 LOG7[4553:0]: 0 server renegotiatiations requested 2005.03.31 14:05:05 LOG7[4553:0]: 0 session cache hits 2005.03.31 14:05:05 LOG7[4553:0]: 0 session cache misses 2005.03.31 14:05:05 LOG7[4553:0]: 0 session cache timeouts 2005.03.31 14:05:05 LOG6[4553:0]: SSL accepted: new session negotiated 2005.03.31 14:05:05 LOG6[4553:0]: Negotiated ciphers: RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 2005.03.31 14:05:05 LOG7[4553:0]: FD 7 in non-blocking mode 2005.03.31 14:05:05 LOG7[4553:0]: daytime connecting 127.0.0.1:13 2005.03.31 14:05:05 LOG7[4553:0]: connect_wait: waiting 10 seconds 2005.03.31 14:05:05 LOG7[4553:0]: connect_wait: connected 2005.03.31 14:05:05 LOG7[4553:0]: Remote FD=7 initialized 2005.03.31 14:05:05 LOG7[4553:0]: Socket closed on read 2005.03.31 14:05:05 LOG7[4553:0]: SSL write shutdown 2005.03.31 14:05:05 LOG7[4553:0]: SSL alert (write): warning: close notify 2005.03.31 14:05:05 LOG7[4553:0]: SSL_shutdown retrying 2005.03.31 14:05:06 LOG7[4553:0]: SSL alert (read): warning: close notify 2005.03.31 14:05:06 LOG7[4553:0]: SSL closed on SSL_read 2005.03.31 14:05:06 LOG7[4553:0]: Socket write shutdown When I check netstat, the connection from the client to stunnel is in the CLOSE_WAIT state and the connection from stunnel to the daytime server is in TIME_WAIT state then 1 minute later, this follows: 2005.03.31 14:06:06 LOG6[4553:0]: s_poll_wait timeout: connection close 2005.03.31 14:06:06 LOG5[4553:0]: Connection closed: 26 bytes sent to SSL, 0 bytes sent to socket 2005.03.31 14:06:06 LOG7[4553:0]: removing pid file /stunnel.pid 2005.03.31 14:06:06 LOG7[4552:0]: Steven: going into client_status with num_clients = 1 2005.03.31 14:06:06 LOG7[4552:0]: Process 4553 finished with code 0 (0 left) Now, netstat no longer shows the connections in any state. ---[ problem 2 Another problem that was found is that after bombarding stunnel with lots of connections, it stops accepting new connections. This would be normal if all connections remained open, but they are all closed. This is the error: Mar 31 13:53:40 hostname stunnel[13044]: Connection rejected: too many clients (>=4000) netstat only shows +- 500 connections, of which none are aimed at the stunnel process in question (port 4321 in my test setup) there is only 1 stunnel process active aswell. I dug into the problem a bit and it probably has to do with num_clients not being decreased after a process is closed (although I can not find any specifics :/) greets, -- Steven

3 4

Terminal services and stunnel 4.09
by Mattias Olsson 01 Apr '05

01 Apr '05

Hi! Im tying to access an internal Win2003 terminal server from my Linux box (internet). As i understand it stunnel should do the work. I have read some documents but im not sure... This is my setup. Linuxbox ----> Linuxbox ssh server | Firewall | Terminal server i wish to access. Can this be done or do i have to open a port in the fw to access the TS directly? Should stunnel.conf look like this on my linuxbox (client) cert = /usr/local/etc/stunnel/mail.pem client = yes On the TS? [TS] accept = 3000 connect = 3389 Should it have cert = ? Or could i on my linux ssh server have a config looking like this: [TS-remote] accept = 3000 connect = <internal-ip>:3389 Should it have cert = ? A novice man sends his best regards and thanks! /Kaz -- Mvh / Regards Mattias Olsson - aka - KaZaMaNIaC

1 0