- stunnel-users - stunnel.org

Oqsprovider support with Openssl 3,x
by mukesh.kochu＠yahoo.com 01 Aug '23

01 Aug '23

hello Team, Anybody knows how to plugin the provider included in the openssl 3.x , to be supported with stunnel , by doing any configuration change or so . To give you guys a background , I compiled a openssl 3.x version and and then compiled liboqs , and build the ops provider support in the openssl 3.x .following the below link. https://github.com/open-quantum-safe/oqs-provider I was under the impression tunnel might support all algorithm which is supported in the openssl version which is used to build the stunnel So I rebuild the same using the pqc supported openssl , but unfortunately not sure how to consume the provider there and or what to be tweaked in he tunnel source code that multiple providers or algorithms will be supported or not . or is it not possible to achieve this without doing a massive source code change ? Appreciate any help on this Regards Mukesh

1 0

can not send
by wizardm＠gmx.de 21 Jul '23

21 Jul '23

hello, I have accounts with gmx, aol and 1&1 (ionos). with gmx and aol I can receive and send. but with 1&1 I can only receive. the stunnel log says "SSL_connect: ssl/record/ssl3_record.c:354: error:0A00010B:SSL routines::wrong version number". in the log of the mail program there is an "error - Unexpected connection termination. Connection lost." what can I do? here is my configuration. [gmx-pop3] client = yes accept = 127.0.0.1:110 connect = pop.gmx.net:995 verifyChain = yes CAfile = ca-certs.pem checkHost = pop.gmx.net OCSPaia = yes [gmx-smtp] client = yes accept = 127.0.0.1:25 connect = mail.gmx.net:465 verifyChain = yes CAfile = ca-certs.pem checkHost = mail.gmx.net OCSPaia = yes [aol-pop3] client = yes accept = 127.0.0.1:10110 ; protocol = pop3 connect = pop.aol.com:995 verifyChain = yes CAfile = ca-certs.pem checkHost = pop.aol.com OCSPaia = yes [aol-smtp] client = yes accept = 127.0.0.1:10025 ; protocol = smtp connect = smtp.aol.com:465 verifyChain = yes CAfile = ca-certs.pem checkHost = smtp.aol.com OCSPaia = yes [1und1-pop3] client = yes accept = 127.0.0.1:1110 connect = pop.ionos.de:995 verifyChain = yes CAfile = ca-certs.pem checkHost = pop.ionos.de OCSPaia = yes [1und1-smtp] client = yes accept = 127.0.0.1:1111 connect = smtp.ionos.de:587 verifyChain = yes CAfile = ca-certs.pem checkHost = smtp.ionos.de OCSPaia = yes thank you very much

1 0

“latest” alias
by David Richard (CajunD) 16 Jul '23

16 Jul '23

Hi Folks, I have found some older discussions about keeping archives and such, but wanted to ask if you could create an alias that always pointed to the latest version. We were hard-linking to a version in /downloads/ and when version 5.69 was removed a few days ago, some automation on our end broke and (as a result of circumstance) caused an outage while we were trying to fix another problem with a remote dependency. We have altered our script to point to the archive version and added checking to ensure any future problems are handled properly. That being said, we will always want the latest version of your software when we build our machine images. And while you do send an announcement, we have to take additional action on our end to get that new version. A “latest” link would allow us to get the latest version automatically when we perform security updates. Thanks for considering this request. David. --- David Richard cajund(a)gmail.com

4 3

securityLevel doesn't work with OpenSSL 3.0
by Yasuhiro Kimura 14 Jul '23

14 Jul '23

Hello, I'd like to use stunnel to acccess SMTP server that has following configuration parameters. Host: smtp.example.org Port number: smtps (465) Encryption method: SMTP over TLS At first I created following configuration file and run stunnel 5.70 with it on FreeBSD 13.2-RELEASE. ---------------------------------------------------------------------- CApath=/home/yasu/.certs client=yes foreground=yes syslog=no verify=2 [12345] accept=localhost:12345 checkHost=smtp.examle.org connect=smtp.examle.org:465 ---------------------------------------------------------------------- But unfortunately stunnel emits following messages and local-side connection.is closed when I connect to 12345 port of localhost. ---------------------------------------------------------------------- 2023.07.14 12:29:12 LOG5[0]: Service [12345] accepted connection from ::1:14632 2023.07.14 12:29:12 LOG5[0]: s_connect: connected 10.0.0.1:465 2023.07.14 12:29:12 LOG5[0]: Service [12345] connected remote server from 192.168.0.1:14633 2023.07.14 12:29:12 LOG5[0]: Certificate accepted at depth=0: C=JP, ST=Tokyo, L=Ohta-Ku, O=EXAMLE.INC, CN=smtp.examle.org 2023.07.14 12:29:12 LOG3[0]: SSL_connect: /usr/src/crypto/openssl/ssl/t1_lib.c:1146: error:1414D172:SSL routines:tls12_check_peer_sigalg:wrong signature type 2023.07.14 12:29:12 LOG5[0]: Connection closed/reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket ---------------------------------------------------------------------- So I added setting of securityLevel as following. ---------------------------------------------------------------------- CApath=/home/yasu/.certs client=yes foreground=yes securityLevel=1 syslog=no verify=2 [12345] accept=localhost:12345 checkHost=smtp.examle.org connect=smtp.examle.org:465 ---------------------------------------------------------------------- And now I can successfully access to STMP server through stunnel. Next, I also tried it on FreeBSD 14-CURRENT and surprisingly stunnel 5.70 emits following messages even if 'securityLevel=1' is specified in configuration file. ---------------------------------------------------------------------- 2023.07.14 12:31:12 LOG5[0]: Service [12345] accepted connection from ::1:10838 2023.07.14 12:31:12 LOG5[0]: s_connect: connected 10.0.0.1:465 2023.07.14 12:31:12 LOG5[0]: Service [12345] connected remote server from 192.168.0.11:41449 2023.07.14 12:31:12 LOG3[0]: SSL_connect: /usr/src/crypto/openssl/ssl/statem/extensions.c:894: error:0A000152:SSL routines::unsafe legacy renegotiation disabled 2023.07.14 12:31:12 LOG5[0]: Connection closed/reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket ---------------------------------------------------------------------- So I also tried on 2 other platforms. a. Cygwin's stunnel.exe (version 5.69) b. tstunnel.exe installed by useing stunnel-5.69-win64-installer.exe And result is that the former works fine and the latter emits same message as FreeBSD 14-CURRENT. According to these result it seems the failure is related to the version of OpenSSL. That is, while FreeBSD 13.2-RELEASE and Cygwin use OpenSSL 1.1.1, FreeBSD 14-CURRENT and stunnel-5.69-win64-installer.exe use OpenSSL 3.0. So does this mean securityLevel option doesn't work with OpenSSL 3.0? Regards. --- Yasuhiro Kimura

2 1

Stunnel is not accepting TLS1.1 anymore?
by Bohnig＠gmx.de 13 Jul '23

13 Jul '23

Hi there, i have a problem (maybe with understanding) with stunnel. I'm using the newest version 5.70 but had this also with 5.66 and 5.69. My goal was to access an Exchange server IIS (on port 443, which understands only TLS1.1 and below) with TLS1.2 and upper. I was able to achieve this with the following config --------------------------- debug = 7 output = stunnel.log [Exserver] accept = 441 connect = 442 cert = stunneldd.pem TIMEOUTclose = 0 [Exclient] client = yes accept = 442 connect = 443 --------------------------- stunneldd.pem i made with openssl req -new -x509 -days 365 -nodes -config openssl.cnf -out stunneldd.pem -keyout stunneldd.pem This is working so far. My problem is, stunnel is no longer accepting TLS1.0 and TLS1.1. I need this for some clients which couldn't talk TLS1.2. But why? All infos i could find (and this was days, not hours) are showing that it should work. Even with the added line sllVerison = all or sslVersionMin = TLSv1 sslVersionMax = TLSv1.3 it ws not accepting TLS1 queries. My steps to confirm this: ------------------------- - install stunnel 5.70 - take the config shown above - make a cert with openssl req -new -x509 -days 365 -nodes -config openssl.cnf -out stunneldd.pem -keyout stunneldd.pem - start stunnel - test it with openssl s_client -connect localhost:441 -tls1_1 -debug stunnel log: ------------ 2023.07.13 09:53:04 LOG7[25]: TLS alert (write): fatal: internal error 2023.07.13 09:53:04 LOG3[25]: SSL_accept: ssl/t1_lib.c:3342: error:0A000076:SSL routines::no suitable signature algorithm I'm thinking, that the bind OpenSSL doesn't support TLS1.1 anymore but the [Exclient] which is talking to Port 443 uses TLS1.1. Or has the cert anything to do with it. I think no, because the andshake failed and that is befor the cert is used? What I'm missing? I want stunnel to accept TLs1.0, TLS1.1. TLS1.2 and upwards on the same port. Would be nice if anybody could help me with this? Many thanks.

1 0

Default destination folder of stunnel-*-win64-installer.exe
by Yasuhiro Kimura 13 Jul '23

13 Jul '23

Hello, If you install stunnel on Windows with stunnel-*-win64-installer.exe, it installs everything under "C:\Program Files (x86)\stunnel" by default. But since it installs 64bit binaries, should default destination folder be "C:\Program Files\stunnel"? Regards.

1 0

`tstunnel -(help|options|version)` outputs garbase with 5.70
by Yasuhiro Kimura 13 Jul '23

13 Jul '23

Hello, With tstunnel.exe installed with stunnel-5.70-win64-installer.exe, `tstunnel -help', `tstunnel -options` and `tstunnel -version` output gabases. The issue doesn't happen with either stunnel 5.70 on Unix or tstunnel.exe installed with stunnel-5.69-win64-installer.exe. Regards. --- Yasuhiro Kimura

1 0

stunnel 5.70 released
by Michal Trojnara 12 Jul '23

12 Jul '23

Dear Users, I have released version 5.70 of stunnel. ### Version 5.70, 2023.07.12, urgency: HIGH * Security bugfixes - OpenSSL DLLs updated to version 3.0.9. - OpenSSL FIPS Provider updated to version 3.0.8. * Bugfixes - Fixed TLS socket EOF handling with OpenSSL 3.x. This bug caused major interoperability issues between stunnel built with OpenSSL 3.x and Microsoft's Schannel Security Support Provider (SSP). - Fixed reading certificate chains from PKCS#12 files. * Features - Added configurable delay for the "retry" option. Home page: https://www.stunnel.org/ Download: https://www.stunnel.org/downloads.html SHA-256 hashes: 7bbc7b9e9a988d76301325db4c110ec360a98ffb8a221c7accbff9c0a8bae2f3 stunnel-5.70.tar.gz c50fb79329ddbf095e65ba8817a0249188aa5b25f15557f8504d8f65876034d9 stunnel-5.70-win64-installer.exe df87f71596ddd8730a5394fd3795b32689664816c0aa87e206e94fdab540f672 stunnel-5.70-android.zip Best regards, Mike

1 0

Cannot open PSKsecrets file
by trashrap22＠gmail.com 11 Jul '23

11 Jul '23

Hi, I am setting up stunnel on my Windows 10 PC, but must be missing something small with the error I am getting: [ ] Initializing inetd mode configuration [ ] Running on Windows 6.2 [ ] No limit detected for the number of clients [.] stunnel 5.69 on x64-pc-mingw32-gnu platform [.] Compiled/running with OpenSSL 3.0.8 7 Feb 2023 [.] Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,OCSP,PSK,SNI [ ] errno: (*_errno()) [ ] Initializing inetd mode configuration [ ] Running on Windows 6.2 [.] Reading configuration from file C:\Program Files (x86)\stunnel\config\stunnel.conf [.] UTF-8 byte order mark detected [.] FIPS mode disabled [ ] Compression disabled [ ] No PRNG seeding was required [ ] Initializing service [Sql_Secure_Trek-<port>] [!] Cannot open PSKsecrets file [!] C:\Program Files (x86)\stunnel\config\stunnel.conf:68: "PSKsecrets = "C:\Program Files (x86)\stunnel\config\pskSql.txt"": Failed to read PSK secrets [!] Configuration failed [ ] Deallocating temporary section defaults [ ] Deallocating section [Sql_Secure_Trek-<port>] Server is down Here is my .conf file: ;Global settings: debug = 7 output = stunnel.log sslVersion = all sslVersionMin = TLSv1.2 sslVersionMax = TLSv1.2 [Sql_Secure_Trek-<port>] client = yes accept = 0.0.0.0:<port> connect = <IP>:<port> ciphers = PSK PSKsecrets = "C:\Program Files (x86)\stunnel\config\pskSql.txt" Any ideas?

1 1

stunnel 5.57 crashed while trying to write logs
by phananh.nguyen＠dxc.com 06 Jul '23

06 Jul '23

it crashed at the function log_raw. here is the backtrace == Backtrace #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:49 #1 0x0000007f82ed54b4 in __GI_abort () at abort.c:79 #2 0x0000007f82f1f984 in __libc_message (action=action@entry=do_abort, fmt=fmt@entry=0x7f82fdc660 "%s\n") at ../sysdeps/posix/libc_fatal.c:155 #3 0x0000007f82f273dc in malloc_printerr (str=str@entry=0x7f82fd7bc8 "corrupted double-linked list") at malloc.c:5389 #4 0x0000007f82f27cc8 in unlink_chunk (p=p@entry=0x7f64012260, av=0x7f64000020) at malloc.c:1472 #5 0x0000007f82f27e48 in malloc_consolidate (av=av@entry=0x7f64000020) at malloc.c:4539 #6 0x0000007f82f29df0 in _int_malloc (av=av@entry=0x7f64000020, bytes=bytes@entry=8192) at malloc.c:3727 #7 0x0000007f82f2c5b0 in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3448 #8 0x0000007f82f1e41c in __GI___open_memstream (bufloc=bufloc@entry=0x7f72ffc3f8, sizeloc=sizeloc@entry=0x7f72ffc400) at memstream.c:83 #9 0x0000007f82f7d274 in __vsyslog_internal (pri=31, pri@entry=7, fmt=fmt@entry=0x5584b5f930 "%s: %s", ap=..., mode_flags=mode_flags@entry=2) at ../misc/syslog.c:181 #10 0x0000007f82f7d810 in __syslog_chk (pri=pri@entry=7, flag=flag@entry=1, fmt=fmt@entry=0x5584b5f930 "%s: %s") at ../misc/syslog.c:136 #11 0x0000005584b45884 in syslog (__fmt=0x5584b5f930 "%s: %s", __pri=7) at /usr/include/bits/syslog.h:31 #12 log_raw (level=level@entry=7, stamp=stamp@entry=0x7f64003420 "2023.06.16 01:36:58", id=id@entry=0x7f64001120 "LOG7[19]", text=text@entry=0x7f6401b060 "Service [proxy-r] started", opt=<optimized out>, opt=<optimized out>) at ../../stunnel-5.57/src/log.c:263 #13 0x0000005584b45b88 in s_log (level=level@entry=7, format=format@entry=0x5584b5a780 "Service [%s] started") at ../../stunnel-5.57/src/log.c:192 #14 0x0000005584b454e8 in client_main (c=c@entry=0x7f82e30060) at ../../stunnel-5.57/src/client.c:178 #15 0x0000005584b45658 in client_thread (arg=0x7f82e30060) at ../../stunnel-5.57/src/client.c:130 #16 0x0000007f83026e64 in start_thread (arg=0x7fc21e457f) at pthread_create.c:463 #17 0x0000007f82f815dc in thread_start () at ../sysdeps/unix/sysv/linux/aarch64/clone.S:78 == Thread apply all backtrace full

2 4