- stunnel-users - stunnel.org

bind error when specifying hostname
by Andrew Farmer 13 Oct '09

13 Oct '09

Hi! I'm not sure if this message was sent to the mailing list the first time... I was not subscribed before but I am now. I'm trying to configure stunnel to use a different CERT depending upon the hostname that my server is accessed on. (Same server has multiple hostnames) Is this feature supported? I didn't get very far before running into issues. This configuration works: (so I know nothing else is bound on port 443) [https] accept = 443 ... etc ... This configuration fails: [https] accept = nmw3.com:443 ... etc ... with this error: 2009.10.09 14:49:18 LOG3[31137:3086100144]: Error binding https to 75.101.155.94:443 2009.10.09 14:49:18 LOG3[31137:3086100144]: bind: Cannot assign requested address (99) So I tried a simpler configuration: [https] accept = 127.0.0.1:443 ... etc ... and that fails with this error: 2009.10.09 14:56:28 LOG3[31222:3086722736]: Error binding https to 127.0.0.1:443 2009.10.09 14:56:28 LOG3[31222:3086722736]: bind: Address already in use (98) Appreciate all your help! Andrew -- View this message in context: http://www.nabble.com/bind-error-when-specifying-hostname-tp25828605p258286… Sent from the Stunnel - Users mailing list archive at Nabble.com.

1 0

Unable to create connection on SSL with FIX Server
by ch.asad＠gmail.com 13 Oct '09

13 Oct '09

Hi, i am using Stunnel to send quickfix messages on SSL to FIX server. I am struck with some errors. In the STUNNEL log i am getting the follow error: 2009.10.13 08:57:05 LOG3[4028:2532]: SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_ HELLO:unknown protocol And in the Quickfix Logs are also shown below: 20091013-02:57:01 : Created session 20091013-02:57:05 : Connecting to 127.0.0.1 on port 9000 20091013-02:57:05 : Initiated logon request 20091013-02:57:05 : Socket Error: An existing connection was forcibly closed by the remote host. 20091013-02:57:05 : Disconnecting 20091013-02:57:06 : Connecting to 127.0.0.1 on port 9000 20091013-02:57:06 : Initiated logon request 20091013-02:57:06 : Socket Error: An existing connection was forcibly closed by the remote host. 20091013-02:57:06 : Disconnecting 20091013-02:57:26 : Connecting to 127.0.0.1 on port 9000 20091013-02:57:26 : Initiated logon request 20091013-02:57:26 : Socket Error: An existing connection was forcibly closed by the remote host. Can any one Guide me what is causing porblem in this?? -- View this message in context: http://www.nabble.com/Unable-to-create-connection-on-SSL-with-FIX-Server-tp… Sent from the Stunnel - Users mailing list archive at Nabble.com.

2 1

Re: [stunnel-users] rewrite Destination: when rewriting Host:
by Brian Hatch 07 Oct '09

07 Oct '09

Sometime near 2007-11-11 00:15 -0500, Marcio Marchini shouted: > Researching online one can see that WebDAV's spec requires that they > check both src and dest URLs for protocol & port. But with some proxies or > SSL fronts like stunnel, only one of the URLs is rewritten, so one goes as > http and the other as https. Here's one person explaining it, much better > than me: http://svn.haxx.se/users/archive-2006-03/0549.shtml Stunnel doesn't currently have the ability to scan and re-write the plaintext. For HTTP redirects it could possibly be implemented (re-write only the response before ^$, and redirects aren't chunked and don't have content lengths to work with, etc) but you'd still need enough HTTP logic to handle keepalives and such. It's not trivial and not likely. Another option would be to have something already HTTP aware doing the rewriting in between stunnel and subversion. A re-writing proxy. Another option would be to use mod_rewrite in apache to rewrite the urls. But the best way would be to just use SSL inside apache and drop stunnel entirely. -- Brian Hatch The best way to accelerate Systems and a Windows machine is at Security Engineer 9.8 meters per second http://www.ifokr.org/bri/ squared. Every message PGP signed

3 2

Weird verify behaviour using intermediate CAs
by Simon Vallet 05 Oct '09

05 Oct '09

Hi, we're trying to make use of stunnel here for proxy purposes : any certificate-authenticated SSL client connection from the Internet would be forwarded to some internal server. This works fine, but I found some surprising behaviour when verifying client certificates. Consider the following setup, using an intermediate client CA : * RootCA ** UserCA1 *** UserCert1 ** UserCA2 *** UserCert2 To make this work, it seems I only have to include the Root CA certificate in either a CAfile or a directory of trusted certificates. I would have expected to have to include the intermediate CA (which is signing the user certificate), but it seems it is not the case. What worries me is that now *any* end-entity certificate which has been issued by *other* intermediate CAs is accepted as valid, i.e. UserCert2 is accepted as valid, even if I don't include UserCA2 anywhere in the configuration. Is this really the intended behaviour ? If not, what would I be missing ? Simon stunnel.conf ----------------------------------------------------------- connect = 127.0.0.1:25 CApath = /etc/stunnel/certs cert = /etc/stunnel/apollon.genoscope.cns.fr-RevChain.pem key = /etc/stunnel/apollon.genoscope.cns.fr-Key.pem verify = 2 debug = 7 ------------------------------------------------------------------------ [root@apollon certs]# ls -l /etc/stunnel/certs/ total 4 lrwxrwxrwx 1 root root 28 sep 30 11:01 9a5490ff.0 -> GenoscopeACRacine.cacert.pem -rw-r--r-- 1 root root 2269 sep 15 11:47 GenoscopeACRacine.cacert.pem [root@apollon certs]#

2 6

Looking for someone to install Stunnel on my server
by Nathan Mueller 02 Oct '09

02 Oct '09

I am looking to hire someone to install Stunnel (and openSSL) on my Media Temple DV account. Please send hourly rate and how long you think it would take to: nmueller(a)g.risd.edu Thank you for your time, Nate

1 0

Advanced Config Question-
by Dave Fazio 01 Oct '09

01 Oct '09

Group, Need help confirming Stunnel can be configured the following way: I have a server that has 5 local IPs, mapping to 5 public IPs on the outside. For example purposes, my local IPs are "A", "B", "C", "D", and "E"... If I connect to a stunnel port configured to "C", will Stunnel route the request outbound on "C" or will it use "A" outbound? The way I have it configured, it's using "A" apparently, no matter what local stunnel IP I bind my connection to. And help will be greatly appreciated. - Dave Windows Server 2003 64-bit Stunnel as a Service Example Config: [Connection-A] accept = 10.5.12.57:9000 connect = outbound.example.server:145 TIMEOUTidle = 4 [Connection-B] accept = 10.5.12.58:9005 connect = outbound.example.server:145 TIMEOUTidle = 4

2 2

SMTP AUTH with stunnel?
by conover＠rahul.net 30 Sep '09

30 Sep '09

Can stunnel be used for a local smtp server, that does not support upstream SMTP AUTH, to connect to an smtp server that requires it? Thanks, John -- John Conover, conover(a)rahul.net, http://www.johncon.com/

2 1

Problems implementing certificate
by Marcelo Iturbe 15 Sep '09

15 Sep '09

Hello, I am using Stunnel 4.27 binary version on Windows 2003 server. In the stunnel.pam file I did the following: In the -----BEGIN RSA PRIVATE KEY----- section, I placed the same text that appeared in the -----BEGIN NEW CERTIFICATE REQUEST----- when I purchased the certificate In the -----BEGIN CERTIFICATE----- section I placed what verisign returned to me. When I try to load Stunnel I get the following error messages: : RAND_status claims sufficient entropy for the PRNG : PRNG seeded successfully : SSL context initialized for service gmail-pop3s : Certificate: stunnel.pem : Error reading certificate file: stunnel.pem : error stack: 140DC009 : error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib : error stack: 906700D : error:0906700D:PEM routines:PEM_ASN1_read_bio:ASN1 lib : error stack: D08303A : error:0D08303A:asn1 encoding routines:ASN1_TEMPLATE_NOEXP_D2I:nested asn1 error : error stack: D07803A : error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error : SSL_CTX_use_certificate_chain_file: D0680A8: error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag : Server is down Any thoughts as to where I went wrong? Thanks for your help

1 0

Re: [stunnel-users] Stunnel Certificate generation
by Alaric Dailey 10 Sep '09

10 Sep '09

You can modify your stunnel.conf, there are lots of examples on the web to do that. Please don't use self-signed certs, you will have no end of issues, and there is NO reason to. StartCom offers free certificates, is in most browsers now, and will be included in IE by the end of September. http://blog.startcom.org/?p=205 So why would you create the headaches of using self-signed certs? Original Message ----------------------- Hi, I would like to know whether it is possible to automate the process of generating stunnel.pem. During the make install we get questions like: Generating a 1024 bit RSA private key ..................++++++ .........++++++ writing new private key to 'stunnel.pem' ----- You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [PL]: How Can i automate it or avoid these questions so that i don't have to provide any input during make install. Please help me if you can. Iam using Tru64 platform. Thanks & Regards, Matty _______________________________________________ stunnel-users mailing list stunnel-users(a)mirt.net http://stunnel.mirt.net/mailman/listinfo/stunnel-users

2 1

Stunnel Certificate generation
by Matty Ronald 09 Sep '09

09 Sep '09

Hi, I would like to know whether it is possible to automate the process of generating stunnel.pem. During the make install we get questions like: Generating a 1024 bit RSA private key ..................++++++ .........++++++ writing new private key to 'stunnel.pem' ----- You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [PL]: How Can i automate it or avoid these questions so that i don't have to provide any input during make install. Please help me if you can. Iam using Tru64 platform. Thanks & Regards, Matty

1 0

using stunnel in HP UX 11i v3
by Mostafa Arab 09 Sep '09

09 Sep '09

Hi Sorry for my question because it is too elementary but I need some help. I want to use stunnel for one of our projects on an HP Itanium server that have HP UX 11i v3 This is result for #uname –a command : HP-UX xxxxx B.11.31 U ia64 2210092972 unlimited-user license I want to start stunnel as client . I found an stunnel in ‘/opt/hpws/apache’ folder. 1- May I use this stunnel for my project? 2- If it is possible how I can start it ? I added one line to /etc/services and tried to start : stunnel –d …. (according to a document) .But it seems that this version don’t support this option. Best Regards, Mostafa

2 1

Maximum number of services
by Malenfant, Andre 04 Sep '09

04 Sep '09

Hi, we have ran into a problem and we have identified that we have reached the limit of 64 services in stunnel. I have seen some info on the net for a possibility or increasing that limit to 256 using the poll() method. There is a patch available for that but for an older version of stunnel. Is there a configuration that I can do to enable that on version 4.20? If not, what are my other options? Set-up a second stunnel? Thanks André

1 0

Re: [stunnel-users] Random Client Ports
by Ludolf Holzheid 02 Sep '09

02 Sep '09

On Wed, 2009-09-02 16:22:35 +0200, Reinier van der Gugten wrote: > I included STunnel in a VB application, and want to start it using the shell command (how else?) > If I start STunnel from the commandline (dos box) it works fine (stunnel\stunnel.exe) > However from within code I get an error: > > Dim MyProcID As Integer = 0 > MyProcID = Shell("Stunnel\STunnel") > stunnel.conf: No such file or directory (2) Reinier, This says, stunnel is found and started by the system, but stunnel does not find stunnel.conf. Maybe it doesn't correctly determine it's own location in relation to the working directory. You might try to specify stunnel.conf on the command line, e.g. MyProcID = Shell("stunnel\stunnel stunnel\stunnel.conf") or MyProcID = Shell("stunnel\stunnel .\stunnel.conf") or something along those lines. Ludolf -- --------------------------------------------------------------- Ludolf Holzheid Tel: +49 621 339960 Bihl+Wiedemann GmbH Fax: +49 621 3392239 Floßwörthstraße 41 e-mail: lholzheid(a)bihl-wiedemann.de D-68199 Mannheim, Germany ---------------------------------------------------------------

1 0

Random Client Ports
by Matt Keoppel 02 Sep '09

02 Sep '09

We are currently trying to add Stunnel to our application. Each time one of our clients try to connect to the server it seems to make its call from a random port. We have set up the server config file to be: [OurApp] accept = 15366 connect = 15365 The config file on our client is set up as: client = yes [OurApp] accept = 1308 connect = [serverIp]:15366 The problem that we are having is that the source port on our client changes every time we try to send data from our client to our server. So one time we send data the port will be 1308 and the next time will be 1309. We also tried to set up multiple configurations that were configure to accept on many ports and all connecting to [serverIP]:15366. Is there any way to get Stunnel working with our dynamic client port? Thanks, MK

4 3

Help compiling - rpath issues
by Jay Martel 18 Aug '09

18 Aug '09

Hello, I am trying to avoid LD_LIBRARY_PATH and thus want to compile in the run time library path. I have tried various options to configure, hacking the LDFLAGS and CC lines in the Makefile, changing libtool varialbes, etc. but my resulting binary never has the library path inside. Things I have tried: LDFLAGS=-R/app/versions/local/3/lib LDFLAGS=-L/app/versions/local/3/lib LDFLAGS=-Wl,--rpath -Wl,/app/versions/local/3/lib libtool variables that seem related but I cannot figure out: hardcode_minus_L=yes hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir" I am using stunnel-4.27 and the configure and libtool it contains. Here is the output of gcc -v: Reading specs from /app/versions/local/3/lib/gcc/i386-pc-solaris2.10/3.4.5/specs Configured with: /opt/autobuild/workdir/gcc-3.4.5/configure --prefix=/app/versions/devtools/3 --with-gnu-ld --with-ld=/app/versions/devtools/3/bin/ld --with-gnu-as --with-as=/app/versions/devtools/3/bin/as --libdir=/app/versions/local/3/lib --with-local-prefix=/app/versions/local/3 --with-gxx-include-dir=/app/versions/local/3/include/c++ --enable-languages=c,c++,objc Thread model: posix gcc version 3.4.5 I am having the same issue with Solaris 10 on i86pc and sparc architectures. Here is the last bit of my make output: /bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/app/versions/local/3/include -o stunnel file.o client.o log.o options.o protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o pty.o libwrap.o -lz -ldl -lsocket -lnsl -lpthread -L/app/versions/local/3/lib -lssl -lcrypto gcc -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/app/versions/local/3/include -o stunnel file.o client.o log.o options.o protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o pty.o libwrap.o -lz -ldl -lsocket -lnsl -lpthread -L/app/versions/local/3/lib -lssl -lcrypto The libtool line should show my rpath setting, I think. How do I get libtool to honor the rpath settings? Should I be asking the libtool maintainers? I check the resulting binary using "strings stunnel | grep app" and my library directory never shows up. Many thanks in advance. -Jay Martel _________________________________________________________________ Windows Live: Make it easier for your friends to see what you’re up to on Facebook. http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:O…

1 0

Re: [stunnel-users] Stunnel configure error
by hdf sdesdh 12 Aug '09

12 Aug '09

Having configured with --enable-static, I thought it would be ok. I tried your suggestion though I got the same error. Here is the complete output. Just a note, I am using the source code tree for TomatoVPN, since it comes with the toolchain to compile everything with. LDFLAGS=-static ./configure2 --host=mipsel-linux --with-ssl=/tmp --enable-static --enable-dh configure2: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. configure2: **************************************** initialization checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for mipsel-linux-strip... mipsel-linux-strip checking build system type... i686-pc-linux-gnu checking host system type... mipsel-unknown-linux-gnu checking for mipsel-linux-gcc... mipsel-linux-gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... yes checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether mipsel-linux-gcc accepts -g... yes checking for mipsel-linux-gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of mipsel-linux-gcc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking whether make sets $(MAKE)... (cached) yes configure2: **************************************** libtool checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by mipsel-linux-gcc... /opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld checking if the linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) is GNU ld... yes checking for /opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld option to reload object files... -r checking for BSD-compatible nm... /opt/brcm/hndtools-mipsel-linux/bin/mipsel-linux-nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... mipsel-linux-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for mipsel-linux-g++... mipsel-linux-g++ checking whether we are using the GNU C++ compiler... yes checking whether mipsel-linux-g++ accepts -g... yes checking dependency style of mipsel-linux-g++... gcc3 checking how to run the C++ preprocessor... mipsel-linux-g++ -E checking for mipsel-linux-g77... no checking for mipsel-linux-xlf... no checking for mipsel-linux-f77... no checking for mipsel-linux-frt... no checking for mipsel-linux-pgf77... no checking for mipsel-linux-cf77... no checking for mipsel-linux-fort77... no checking for mipsel-linux-fl32... no checking for mipsel-linux-af77... no checking for mipsel-linux-xlf90... no checking for mipsel-linux-f90... no checking for mipsel-linux-pgf90... no checking for mipsel-linux-pghpf... no checking for mipsel-linux-epcf90... no checking for mipsel-linux-gfortran... no checking for mipsel-linux-g95... no checking for mipsel-linux-xlf95... no checking for mipsel-linux-f95... no checking for mipsel-linux-fort... no checking for mipsel-linux-ifort... no checking for mipsel-linux-ifc... no checking for mipsel-linux-efc... no checking for mipsel-linux-pgf95... no checking for mipsel-linux-lf95... no checking for mipsel-linux-ftn... no checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 1572864 checking command to parse /opt/brcm/hndtools-mipsel-linux/bin/mipsel-linux-nm -B output from mipsel-linux-gcc object... ok checking for objdir... .libs checking for mipsel-linux-ar... mipsel-linux-ar checking for mipsel-linux-ranlib... mipsel-linux-ranlib checking for mipsel-linux-strip... (cached) mipsel-linux-strip checking if mipsel-linux-gcc supports -fno-rtti -fno-exceptions... yes checking for mipsel-linux-gcc option to produce PIC... -fPIC checking if mipsel-linux-gcc PIC flag -fPIC works... yes checking if mipsel-linux-gcc static flag -static works... yes checking if mipsel-linux-gcc supports -c -o file.o... yes checking whether the mipsel-linux-gcc linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure2: creating libtool appending configuration tag "CXX" to libtool checking for ld used by mipsel-linux-g++... /opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld checking if the linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) is GNU ld... yes checking whether the mipsel-linux-g++ linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) supports shared libraries... yes checking for mipsel-linux-g++ option to produce PIC... -fPIC checking if mipsel-linux-g++ PIC flag -fPIC works... yes checking if mipsel-linux-g++ static flag -static works... yes checking if mipsel-linux-g++ supports -c -o file.o... yes checking whether the mipsel-linux-g++ linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so (cached) (cached) checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool configure2: **************************************** types checking for unsigned char... yes checking size of unsigned char... 1 checking for unsigned short... yes checking size of unsigned short... 2 checking for unsigned int... yes checking size of unsigned int... 4 checking for unsigned long... yes checking size of unsigned long... 4 checking for socklen_t... yes configure2: **************************************** PTY device files checking for "/dev/ptmx"... (cached) yes checking for "/dev/ptc"... no configure2: **************************************** entropy checking for "/dev/urandom"... yes configure2: **************************************** default group checking for default group... nogroup configure2: **************************************** header files checking ucontext.h usability... yes checking ucontext.h presence... yes checking for ucontext.h... yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking poll.h usability... yes checking poll.h presence... yes checking for poll.h... yes checking sys/poll.h usability... yes checking sys/poll.h presence... yes checking for sys/poll.h... yes checking tcpd.h usability... no checking tcpd.h presence... no checking for tcpd.h... no checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/filio.h usability... no checking sys/filio.h presence... no checking for sys/filio.h... no checking stropts.h usability... yes checking stropts.h presence... yes checking for stropts.h... yes checking grp.h usability... yes checking grp.h presence... yes checking for grp.h... yes checking for unistd.h... (cached) yes checking util.h usability... no checking util.h presence... no checking for util.h... no checking libutil.h usability... no checking libutil.h presence... no checking for libutil.h... no checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking pty.h usability... yes checking pty.h presence... yes checking for pty.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking for struct msghdr.msg_control... yes configure2: **************************************** libraries checking for library containing gethostbyname... none required checking for library containing yp_get_default_domain... -lnsl checking for socket in -lsocket... no checking for openpty in -lutil... yes checking for dlopen in -ldl... yes checking for shl_load in -ldld... no checking for inflateEnd in -lz... no configure2: **************************************** thread model checking for pthread_create in -lc_r... no checking for pthread_create in -lpthread... yes configure2: PTHREAD thread model detected configure2: **************************************** library functions checking for snprintf... yes checking for vsnprintf... yes checking for openpty... yes checking for _getpty... no checking for daemon... yes checking for waitpid... yes checking for wait4... yes checking for setsid... yes checking for setgroups... yes checking for chroot... yes checking for sysconf... yes checking for getrlimit... yes checking for pthread_sigmask... yes checking for localtime_r... yes checking for getcontext... no checking for __makecontext_v2... no checking for poll... yes checking for endhostent... yes checking for getnameinfo... yes checking for getaddrinfo... yes checking for broken poll() implementation... no configure2: **************************************** SSL checking for SSL directory... /tmp checking for obsolete RSAref library... no checking /tmp/include/openssl/engine.h usability... yes checking /tmp/include/openssl/engine.h presence... no configure2: WARNING: /tmp/include/openssl/engine.h: accepted by the compiler, rejected by the preprocessor! configure2: WARNING: /tmp/include/openssl/engine.h: proceeding with the compiler's result checking for /tmp/include/openssl/engine.h... yes configure2: **************************************** optional features checking whether to disable RSA support... no checking whether to enable DH support... yes checking whether to enable IPv6 support... yes checking whether to disable TCP wrappers library support... autodetecting checking for hosts_access in -lwrap... no checking whether to enable FIPS mode support... autodetecting checking for FIPS_mode_set... no configure2: **************************************** write the results configure2: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/stunnel3 config.status: creating doc/Makefile config.status: creating tools/Makefile config.status: creating tools/stunnel.conf-sample config.status: creating tools/stunnel.init config.status: executing depfiles commands configure2: **************************************** success # make Making all in src make[1]: Entering directory `/root/tomato/release/src/router/stunnel/src' if /bin/bash ../libtool --tag=CC --mode=compile mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT env.lo -MD -MP -MF ".deps/env.Tpo" -c -o env.lo env.c; \ then mv -f ".deps/env.Tpo" ".deps/env.Plo"; else rm -f ".deps/env.Tpo"; exit 1; fi mkdir .libs mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" "-DPACKAGE_STRING=\"stunnel 4.27\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR=\"/usr/local/lib/stunnel\" -DCONFDIR=\"/usr/local/etc/stunnel\" -DPIDFILE=\"/usr/local/var/run/stunnel/stunnel.pid\" -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT env.lo -MD -MP -MF .deps/env.Tpo -c env.c -fPIC -DPIC -o .libs/env.o mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" "-DPACKAGE_STRING=\"stunnel 4.27\"" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR=\"/usr/local/lib/stunnel\" -DCONFDIR=\"/usr/local/etc/stunnel\" -DPIDFILE=\"/usr/local/var/run/stunnel/stunnel.pid\" -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT env.lo -MD -MP -MF .deps/env.Tpo -c env.c -o env.o >/dev/null 2>&1 /bin/bash ../libtool --tag=CC --mode=link mipsel-linux-gcc -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -static -o libstunnel.la -rpath /usr/local/lib/stunnel -avoid-version env.lo -ldl -lutil -lnsl -lpthread -L/tmp/lib -lssl -lcrypto mipsel-linux-ar cru .libs/libstunnel.a env.o mipsel-linux-ranlib .libs/libstunnel.a creating libstunnel.la (cd .libs && rm -f libstunnel.la && ln -s ../libstunnel.la libstunnel.la) if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT file.o -MD -MP -MF ".deps/file.Tpo" -c -o file.o file.c; \ then mv -f ".deps/file.Tpo" ".deps/file.Po"; else rm -f ".deps/file.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT client.o -MD -MP -MF ".deps/client.Tpo" -c -o client.o client.c; \ then mv -f ".deps/client.Tpo" ".deps/client.Po"; else rm -f ".deps/client.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT log.o -MD -MP -MF ".deps/log.Tpo" -c -o log.o log.c; \ then mv -f ".deps/log.Tpo" ".deps/log.Po"; else rm -f ".deps/log.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT options.o -MD -MP -MF ".deps/options.Tpo" -c -o options.o options.c; \ then mv -f ".deps/options.Tpo" ".deps/options.Po"; else rm -f ".deps/options.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT protocol.o -MD -MP -MF ".deps/protocol.Tpo" -c -o protocol.o protocol.c; \ then mv -f ".deps/protocol.Tpo" ".deps/protocol.Po"; else rm -f ".deps/protocol.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT network.o -MD -MP -MF ".deps/network.Tpo" -c -o network.o network.c; \ then mv -f ".deps/network.Tpo" ".deps/network.Po"; else rm -f ".deps/network.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT resolver.o -MD -MP -MF ".deps/resolver.Tpo" -c -o resolver.o resolver.c; \ then mv -f ".deps/resolver.Tpo" ".deps/resolver.Po"; else rm -f ".deps/resolver.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT ssl.o -MD -MP -MF ".deps/ssl.Tpo" -c -o ssl.o ssl.c; \ then mv -f ".deps/ssl.Tpo" ".deps/ssl.Po"; else rm -f ".deps/ssl.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT ctx.o -MD -MP -MF ".deps/ctx.Tpo" -c -o ctx.o ctx.c; \ then mv -f ".deps/ctx.Tpo" ".deps/ctx.Po"; else rm -f ".deps/ctx.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT verify.o -MD -MP -MF ".deps/verify.Tpo" -c -o verify.o verify.c; \ then mv -f ".deps/verify.Tpo" ".deps/verify.Po"; else rm -f ".deps/verify.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT sthreads.o -MD -MP -MF ".deps/sthreads.Tpo" -c -o sthreads.o sthreads.c; \ then mv -f ".deps/sthreads.Tpo" ".deps/sthreads.Po"; else rm -f ".deps/sthreads.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT stunnel.o -MD -MP -MF ".deps/stunnel.Tpo" -c -o stunnel.o stunnel.c; \ then mv -f ".deps/stunnel.Tpo" ".deps/stunnel.Po"; else rm -f ".deps/stunnel.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT pty.o -MD -MP -MF ".deps/pty.Tpo" -c -o pty.o pty.c; \ then mv -f ".deps/pty.Tpo" ".deps/pty.Po"; else rm -f ".deps/pty.Tpo"; exit 1; fi if mipsel-linux-gcc -DPACKAGE_NAME=\"stunnel\" -DPACKAGE_TARNAME=\"stunnel\" -DPACKAGE_VERSION=\"4.27\" -DPACKAGE_STRING=\"stunnel\ 4.27\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"stunnel\" -DVERSION=\"4.27\" -DHOST=\"mipsel-unknown-linux-gnu\" -DCPU_MIPSEL=1 -DVENDOR_UNKNOWN=1 -DOS_LINUX_GNU=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DSIZEOF_UNSIGNED_CHAR=1 -DSIZEOF_UNSIGNED_SHORT=2 -DSIZEOF_UNSIGNED_INT=4 -DSIZEOF_UNSIGNED_LONG=4 -DHAVE_DEV_PTMX=1 -DRANDOM_FILE=\"/dev/urandom\" -DHAVE_UCONTEXT_H=1 -DHAVE_PTHREAD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_POLL_H=1 -DHAVE_SYS_POLL_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_STROPTS_H=1 -DHAVE_GRP_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_RESOURCE_H=1 -DHAVE_PTY_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_STRUCT_MSGHDR_MSG_CONTROL=1 -DHAVE_MSGHDR_MSG_CONTROL=1 -DHAVE_LIBUTIL=1 -DHAVE_LIBDL=1 -DHAVE_LIBPTHREAD=1 -DUSE_PTHREAD=1 -DHAVE_SNPRINTF=1 -DHAVE_VSNPRINTF=1 -DHAVE_OPENPTY=1 -DHAVE_DAEMON=1 -DHAVE_WAITPID=1 -DHAVE_WAIT4=1 -DHAVE_SETSID=1 -DHAVE_SETGROUPS=1 -DHAVE_CHROOT=1 -DHAVE_SYSCONF=1 -DHAVE_GETRLIMIT=1 -DHAVE_PTHREAD_SIGMASK=1 -DHAVE_LOCALTIME_R=1 -DHAVE_POLL=1 -DHAVE_ENDHOSTENT=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_OPENSSL=1 -Dssldir=\"/tmp\" -DHAVE_OSSL_ENGINE_H=1 -DUSE_DH=1 -DUSE_IPv6=1 -I. -I. -I/usr/kerberos/include -DLIBDIR='"/usr/local/lib/stunnel"' -DCONFDIR='"/usr/local/etc/stunnel"' -DPIDFILE='"/usr/local/var/run/stunnel/stunnel.pid"' -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -MT libwrap.o -MD -MP -MF ".deps/libwrap.Tpo" -c -o libwrap.o libwrap.c; \ then mv -f ".deps/libwrap.Tpo" ".deps/libwrap.Po"; else rm -f ".deps/libwrap.Tpo"; exit 1; fi /bin/bash ../libtool --tag=CC --mode=link mipsel-linux-gcc -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -static -o stunnel file.o client.o log.o options.o protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o pty.o libwrap.o -ldl -lutil -lnsl -lpthread -L/tmp/lib -lssl -lcrypto mipsel-linux-gcc -g -O2 -Wall -Wshadow -Wcast-align -Wpointer-arith -I/tmp/include -o stunnel file.o client.o log.o options.o protocol.o network.o resolver.o ssl.o ctx.o verify.o sthreads.o stunnel.o pty.o libwrap.o -ldl -lutil -lnsl -lpthread -L/tmp/lib -lssl -lcrypto make[1]: Leaving directory `/root/tomato/release/src/router/stunnel/src' Making all in doc make[1]: Entering directory `/root/tomato/release/src/router/stunnel/doc' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/root/tomato/release/src/router/stunnel/doc' Making all in tools make[1]: Entering directory `/root/tomato/release/src/router/stunnel/tools' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/root/tomato/release/src/router/stunnel/tools' make[1]: Entering directory `/root/tomato/release/src/router/stunnel' make[1]: Nothing to be done for `all-am'. make[1]: Leaving directory `/root/tomato/release/src/router/stunnel' # After downloading it, to my router # ./stunnel > -sh: ./stunnel: not found I tried uploading the openssl version I compiled for stunnel (v 1.0.0-stable-SNAP-20090809, which I also compiled for the router, and is functioning mostly) as well, and got the same error. If you have any other suggestions, I'm open to them, otherwise, I think I'm going to have to retire this project for now. Thank you -- Be Yourself @ mail.com! Choose From 200+ Email Addresses Get a Free Account at www.mail.com!

1 0

Re: [stunnel-users] Stunnel configure error
by hdf sdesdh 12 Aug '09

12 Aug '09

Thanks for the suggestion, I was able to make the necessary changes and pass the configure and make process. Unfortunately, after uploading and running the app, the app will not run: # ls -al /tmp -rwxrwxrwx 1 root root 2434012 Aug 12 01:44 stunnel -rw-r--r-- 1 root root 1148 Aug 12 01:37 stunnel.conf -rw-r--r-- 1 root root 1977 Aug 12 01:44 stunnel.pem drwxr-xr-x 1 root root 0 Dec 31 1969 var # cd /tmp # ./stunnel -sh: ./stunnel: not found The file is obviously there, with execute permissions. What is failing?? Thank you > checking for "/dev/ptmx"... configure: error: cannot check for file > existence when cross compiling. > > Give me your suggestions. Check that /dev/ptmx exists on your router; it does on my Buffalo router with Tomato. If it does, then hack the configure script to force the test to return true. A search in the script for ptmx should take you right to the test. Good luck, Andrew. -- Be Yourself @ mail.com! Choose From 200+ Email Addresses Get a Free Account at www.mail.com!

2 1

Stunnel configure error
by hdf sdesdh 12 Aug '09

12 Aug '09

I have been receiving errors when configuring Stunnel, which I intend to cross compile for use with my Linksys WRT54GL router (Tomato firmware). When passing ./configure --host=mipsel-linux --with-ssl=/root/openssl --enable-static --enable-dh --libexecdir=/tmp the configure process stops with an error. Here is the complete output. ./configure --host=mipsel-linux --with-ssl=/root/openssl --enable-static --enable-dh --libexecdir=/tmp configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. configure: **************************************** initialization checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for mipsel-linux-strip... mipsel-linux-strip checking build system type... i686-pc-linux-gnu checking host system type... mipsel-unknown-linux-gnu checking for mipsel-linux-gcc... mipsel-linux-gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... yes checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether mipsel-linux-gcc accepts -g... yes checking for mipsel-linux-gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of mipsel-linux-gcc... gcc3 checking for a BSD-compatible install... /usr/bin/install -c checking whether make sets $(MAKE)... (cached) yes configure: **************************************** libtool checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by mipsel-linux-gcc... /opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld checking if the linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) is GNU ld... yes checking for /opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld option to reload object files... -r checking for BSD-compatible nm... /opt/brcm/hndtools-mipsel-linux/bin/mipsel-linux-nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... mipsel-linux-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for mipsel-linux-g++... mipsel-linux-g++ checking whether we are using the GNU C++ compiler... yes checking whether mipsel-linux-g++ accepts -g... yes checking dependency style of mipsel-linux-g++... gcc3 checking how to run the C++ preprocessor... mipsel-linux-g++ -E checking for mipsel-linux-g77... no checking for mipsel-linux-xlf... no checking for mipsel-linux-f77... no checking for mipsel-linux-frt... no checking for mipsel-linux-pgf77... no checking for mipsel-linux-cf77... no checking for mipsel-linux-fort77... no checking for mipsel-linux-fl32... no checking for mipsel-linux-af77... no checking for mipsel-linux-xlf90... no checking for mipsel-linux-f90... no checking for mipsel-linux-pgf90... no checking for mipsel-linux-pghpf... no checking for mipsel-linux-epcf90... no checking for mipsel-linux-gfortran... no checking for mipsel-linux-g95... no checking for mipsel-linux-xlf95... no checking for mipsel-linux-f95... no checking for mipsel-linux-fort... no checking for mipsel-linux-ifort... no checking for mipsel-linux-ifc... no checking for mipsel-linux-efc... no checking for mipsel-linux-pgf95... no checking for mipsel-linux-lf95... no checking for mipsel-linux-ftn... no checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 1572864 checking command to parse /opt/brcm/hndtools-mipsel-linux/bin/mipsel-linux-nm -B output from mipsel-linux-gcc object... ok checking for objdir... .libs checking for mipsel-linux-ar... mipsel-linux-ar checking for mipsel-linux-ranlib... mipsel-linux-ranlib checking for mipsel-linux-strip... (cached) mipsel-linux-strip checking if mipsel-linux-gcc supports -fno-rtti -fno-exceptions... yes checking for mipsel-linux-gcc option to produce PIC... -fPIC checking if mipsel-linux-gcc PIC flag -fPIC works... yes checking if mipsel-linux-gcc static flag -static works... yes checking if mipsel-linux-gcc supports -c -o file.o... yes checking whether the mipsel-linux-gcc linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by mipsel-linux-g++... /opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld checking if the linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) is GNU ld... yes checking whether the mipsel-linux-g++ linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) supports shared libraries... yes checking for mipsel-linux-g++ option to produce PIC... -fPIC checking if mipsel-linux-g++ PIC flag -fPIC works... yes checking if mipsel-linux-g++ static flag -static works... yes checking if mipsel-linux-g++ supports -c -o file.o... yes checking whether the mipsel-linux-g++ linker (/opt/brcm/hndtools-mipsel-linux/mipsel-linux/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so (cached) (cached) checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool configure: **************************************** types checking for unsigned char... yes checking size of unsigned char... 1 checking for unsigned short... yes checking size of unsigned short... 2 checking for unsigned int... yes checking size of unsigned int... 4 checking for unsigned long... yes checking size of unsigned long... 4 checking for socklen_t... yes configure: **************************************** PTY device files checking for "/dev/ptmx"... configure: error: cannot check for file existence when cross compiling. Give me your suggestions. Thank you -- Be Yourself @ mail.com! Choose From 200+ Email Addresses Get a Free Account at www.mail.com!

2 1

running more than 1 stunnel as windows service
by Franjo Stipanovic 04 Aug '09

04 Aug '09

Hi guys, is there a way to install multiple stunnel instances as windows service? Where could I change service name? I get error: CreateService : the specified service already exists -- best wishes, Franjo Stipanovic

1 1

stunnel, haproxy and ssl cert
by Maxim 04 Aug '09

04 Aug '09

Hello dear community. I faced some troubles for iphone: I moved separate server from hardware to AWS Cloud with SSL certificate from Register.com. It moved well, and phone application continue work with new server without any problems. Then I installed LoadBalancer (HAProxy and Stunnel) for it and moved certificate with key from configs of Apache to config of stunnel. In PC browser it continue works well, and shows me blue field near the URL as trusted. But on iPhone browser it shows just "Untrusted server certificate". Is there any difference for ssl certificate for stunnel and Apache? I understand that there is very specific question, but would you have any ideas about it? *Config of stunnel:* cert = /usr/local/etc/stunnel/stunnel.pem chroot = /usr/local/var/lib/stunnel/ setuid = nobody setgid = nobody pid = /stunnel.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = stunnel.log [https] accept = 443 connect = 80 xforwardedfor=yes TIMEOUTclose = 0 *Patch for stunnel* http://haproxy.1wt.eu/download/patches/stunnel-4.22-xforwarded-for.diff need to make work "xforwardedfor=yes" *# stunnel -version* stunnel 4.22 on i686-pc-linux-gnu with OpenSSL 0.9.8b 04 May 2006 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Global options debug = 5 pid = /usr/local/var/run/stunnel/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options cert = /usr/local/etc/stunnel/stunnel.pem ciphers = AES:ALL:!aNULL:!eNULL:+RC4:@STRENGTH key = /usr/local/etc/stunnel/stunnel.pem session = 300 seconds stack = 65536 bytes sslVersion = SSLv3 for client, all for server TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none * # uname -a* Linux domU-12-31-38-00-35-07 2.6.18-xenU-ec2-v1.0 #2 SMP Tue Feb 19 10:51:53 EST 2008 i686 athlon i386 GNU/Linux * # openssl version* OpenSSL 0.9.8b 04 May 2006 *And logs from stunnel when iphone tryed to conenct* 2009.08.04 08:20:16 LOG7[31023:3081598672]: https accepted FD=15 from 24.5.77.143:58019 2009.08.04 08:20:16 LOG7[31023:3081550736]: https started 2009.08.04 08:20:16 LOG7[31023:3081550736]: FD 15 in non-blocking mode 2009.08.04 08:20:16 LOG7[31023:3081550736]: TCP_NODELAY option set on local socket 2009.08.04 08:20:16 LOG7[31023:3081550736]: Waiting for a libwrap process 2009.08.04 08:20:16 LOG7[31023:3081550736]: Acquired libwrap process #0 2009.08.04 08:20:16 LOG7[31023:3081550736]: Releasing libwrap process #0 2009.08.04 08:20:16 LOG7[31023:3081550736]: Released libwrap process #0 2009.08.04 08:20:16 LOG7[31023:3081550736]: https permitted by libwrap from 24.5.77.143:58019 2009.08.04 08:20:16 LOG5[31023:3081550736]: https accepted connection from 24.5.77.143:58019 2009.08.04 08:20:16 LOG7[31023:3081550736]: SSL state (accept): before/accept initialization 2009.08.04 08:20:16 LOG7[31023:3081550736]: SSL state (accept): SSLv3 read client hello A 2009.08.04 08:20:16 LOG7[31023:3081550736]: SSL state (accept): SSLv3 write server hello A 2009.08.04 08:20:16 LOG7[31023:3081550736]: SSL state (accept): SSLv3 write certificate A 2009.08.04 08:20:16 LOG7[31023:3081550736]: SSL state (accept): SSLv3 write server done A 2009.08.04 08:20:16 LOG7[31023:3081550736]: SSL state (accept): SSLv3 flush data 2009.08.04 08:20:16 LOG3[31023:3081550736]: SSL_accept: Peer suddenly disconnected 2009.08.04 08:20:16 LOG5[31023:3081550736]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2009.08.04 08:20:16 LOG7[31023:3081550736]: https finished (0 left) Thank you in advance, Max

1 0

write client hello hang/timeout
by . 01 Aug '09

01 Aug '09

stunnel4 config 2009.08.01 05:09:29 LOG7[4856:0]: Snagged 64 random bytes from /home/c7a71k/.rnd 2009.08.01 05:09:29 LOG7[4856:0]: Wrote 1024 new random bytes to /home/c7a71k/.rnd 2009.08.01 05:09:29 LOG7[4856:0]: RAND_status claims sufficient entropy for the PRNG 2009.08.01 05:09:29 LOG7[4856:0]: PRNG seeded successfully 2009.08.01 05:09:29 LOG7[4856:0]: Certificate: /etc/stunnel/stunnel.pem 2009.08.01 05:09:29 LOG7[4856:0]: Certificate loaded 2009.08.01 05:09:29 LOG7[4856:0]: Key file: /etc/stunnel/stunnel.pem 2009.08.01 05:09:29 LOG7[4856:0]: Private key loaded 2009.08.01 05:09:29 LOG7[4856:0]: SSL context initialized for service stunnel 2009.08.01 05:09:29 LOG5[4856:0]: stunnel 4.22 on i686-pc-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 2009.08.01 05:09:29 LOG5[4856:0]: Threading:FORK SSL:ENGINE Sockets:POLL,IPv6 2009.08.01 05:09:29 LOG7[4856:0]: stunnel started 2009.08.01 05:09:29 LOG7[4856:0]: FD 0 in non-blocking mode 2009.08.01 05:09:29 LOG7[4856:0]: FD 1 in non-blocking mode 2009.08.01 05:09:29 LOG7[4856:0]: FD 4 in non-blocking mode 2009.08.01 05:09:29 LOG7[4856:0]: stunnel connecting 212.93.193.72:443 2009.08.01 05:09:29 LOG7[4856:0]: connect_wait: waiting 10 seconds 2009.08.01 05:09:29 LOG7[4856:0]: connect_wait: connected 2009.08.01 05:09:29 LOG5[4856:0]: stunnel connected remote server from 192.168.2.100:47406 2009.08.01 05:09:29 LOG7[4856:0]: Remote FD=4 initialized 2009.08.01 05:09:29 LOG7[4856:0]: SSL state (connect): before/connect initialization 2009.08.01 05:09:29 LOG7[4856:0]: SSL state (connect): SSLv2 write client hello A # (hangs indefinitely) #here's the config: client = yes foreground = yes debug = 7 cert = /etc/stunnel/stunnel.pem sslVersion = SSLv2 connect = 212.93.193.72:443 execargs = iceweasel # I think I'm supposed to get a "read server hello A" back?... But I get nothing, and iceweasel is *not* launched. # Anyone know how to overcome this?

1 0

[patch] Redirect to a fake destination if client's certificate couldn't be verified
by Jeremie Le Hen 29 Jul '09

29 Jul '09

Hi list, I've written a patch to bring in the following directives: - evilconnect - evilexec/evilexecargs The idea is when stunnel works in server mode and is asked to verify the client's certificate, it normally shuts the connection down when the latter is invalid. With these options, when the certificate can't be verified, stunnel redirects the "evil" connection to another destination. What is the purpose of this new feature ? For instance, if your company does not allow SSH connections out, you may use the following configuation: % connect = yourdomain.com:22 % evilconnect = www.yourdomain.com:80 So you will access your SSH server with your valid user certificate. On the other hand, if an over-zealous sneaky admin looks at the proxy logs and tries to connect to your stunnel, it will be redirected to an uninteresting website ;). Here is the documentation: % evilconnect = [host:]port % connect to a remote host:port when the client's certificate cannot % be verified % % This is only meaningful in server mode when connect and verify are % used. Otherwise it has the same properties as the connect option. % % evilexec = executable_path (Unix only) % execute local inetd-type program when the client's certificate can- % not be verified % % This is only meaningful in server mode when exec and verify are % used. Otherwise it has the same properties as the exec option. % % execargs = $0 $1 $2 ... (Unix only) % arguments for evilexec including program name ($0) % % Quoting is currently not supported. Arguments are separated with % arbitrary number of whitespaces. I'd like to thank Mathieu CHOUQUET-STRINGER who actually had this very good idea and implemented a proof of concept code with GnuTLS. Also, thank to Vin0x64 <vincent vin0x64 fr> who tested this patch and verified that it works. Looking forward for your remarks... thanks! Best regards, -- Jeremie Le Hen < jeremie at le-hen dot org >< ttz at chchile dot org >

1 1

Stunnel listen on different ports
by Noel Sanchez 21 Jul '09

21 Jul '09

I have had a working stunnel conf for much time, very happy with it. [stunnel] accept = 0.0.0.0:30000 connect = 192.168.27.102:8000 I have stunnel listening on port 30000 and then sending to 192.168.27.102 on port 8000. Works good. I now want to add more listening ports to stunnel, like so: [stunnel] accept = 0.0.0.0:30000 connect = 192.168.27.102:8000 accept = 0.0.0.0:30006 connect = 192.168.27.102:8006 When I do this, stunnel only binds to 30006, per my log file: stunnel bound to 0.0.0.0:30006 And when I do a netstat -vatn: tcp 0 0 0.0.0.0:30006 0.0.0.0:* LISTEN It is not listening on port 30000 anymore. I'd like to accepts connections on many different ports, then send accordingly. Can I do this? Why does stunnel only listen to one port when I add more accept lines in its config? Noel

2 2

Re: [stunnel-users] using webdav: YES IT WORKS WITH NET USE
by delaage.pierre＠free.fr 18 Jul '09

18 Jul '09

Well after some more tests I achieve net use to work: UseBasicAuth is VITAL on the xp client (reboot) Accordingly configure apache with basic plain text auth stunnel routing localhost:80 to remote:443 (as you did) to pass your credentials use EXACTLY this command line : net use y: \\localhost\davfolder (with no extra \) YOURPASSWORD /USER:YOURUSERNAME (this in the only way to have hhtp credentials sent to the server). tested on client: xpsp2 + kb892211 + kb911927 (IMPORTANT ALSO, needs reboot) + stunnel 427 and server apache 2.2.6/Mandriva 2008. kb907306 replaces 892211, but I have not tested with it (I think it should work). If you cannot achieve it to work please let me know the exact error message you receive from windows. Again your problem is only related to windows issue, not stunnel. Pierre Quoting Jan-Florian Hilgenberg <florianhilgenberg(a)googlemail.com>: > yes, i am the admin. have pulled it back to basic auth. > okay i have installed Webfldrs-KB907306-ENU.exe and checked for its listing > in systemcontrol -> software (show updates) - it does not appear there! :-( > add network location: > it is running directly to the server and through stunnel, too :-) > > wtf? i have to install office2003 for such a problem? mh okay, i did so - no > change in behaviour - mh the failures of net use are changing - now it is a > systemfailure 67. networkname not found > syntax: net use x: \\127.0.0.1\user /user:user > > thank you - flo > > > 2009/7/18 <delaage.pierre(a)free.fr> > > > A question : > > Are you the administrator of your web server ? > > if yes : set up apache with "basic authentication", not digest (this will > > not be > > a problem later with ssl) and setup the registry key usebasicauth to 1 on > > your > > client. > > SP3 does NOT contain kb907306 : so install it (you will not damage your > > system > > if this patch is already in it). > > Forget net use for the moment : "add network location" should work first. > > > > IMPORTANT : "add network location" supports SSL WITHOUT the need of > > stunnel, so > > try to setup directly a "location" pointing to " > > https://yourserver/yourfolder". > > of course you will need to install first your own certificate with > > "internet > > explorer", so that windows can use it to connect to your ssl server. > > > > Something else : check this http://support.microsoft.com/KB/942392 > > ...ie be sure that your server allow browsing dav space FROM the root url. > > Moreover, always according to kb942392, to have net use working one must > > have > > ...MS office installed! > > > > Pierre > > > > > > Quoting Jan-Florian Hilgenberg <florianhilgenberg(a)googlemail.com>: > > > > > ok, i thought that i've sp3 in my virtualbox... but it is installed now - > > > and all other updates too! > > > i've tested with digest authentification now - but it isn't running. > > > the remote server is a debian lenny with apache2.2. > > > the ssl certificate is validated by Equifax Secure Inc. > > > ie7: sure :) and i am confused in the moment the mapping in networkarea > > as > > > addition web ressource isn't running. tried it with ssl in the past (was > > > running) and now without ssl, there appears this log in apache: > > > [Sat Jul 18 00:30:33 2009] [error] [client ip] user > > > subdomain.example.de\user > > > not found: / > > > for the digest method the same with "realm" > > > however there is no preview for the files with this method, and that is > > what > > > i need :( > > > > > > i think i haven't installed kb907306 in the moment(mh ok maybe it is in > > > servicepack 3 ?), but i don't know what you mean with dbl click feature > > :-( > > > > > > i'm really pleased for your help :-) > > > > > > 2009/7/17 <delaage.pierre(a)free.fr> > > > > > > > Next step : > > > > be sure to have kb892211 (preferred) or more recent kb907306 (suppress > > dbl > > > > click > > > > feature!) installed on your system and retry. > > > > Yes you have to create the registry key by hand on your client system, > > > > but you really have to know more about your server authentication > > process. > > > > About ie7 : have you been able to browse in your webfolders, via a > > folder > > > > view? > > > > > > > > Try also adding your web folder to windows explorer by using "Add > > Network > > > > location", which is another mechanism than mapping a drive letter, and > > more > > > > often works. > > > > > > > > See you soon, > > > > Pierre Delaage > > > > > > > > > > > > > > > > Quoting Jan-Florian Hilgenberg <florianhilgenberg(a)googlemail.com>: > > > > > > > > > wow thank you, some really good tips :) > > > > > i tested it with ie 7 and it is running fine. > > > > > then i've set the regkey, is it right that i have to create it by > > myself? > > > > > rebooted - and no, there is the same error :-( > > > > > the gui for the net use command ( explorer/tools/ map networkdrive) > > isn't > > > > > running, too! > > > > > > > > > > i really hope, that any body could help me > > > > > thank you > > > > > > > > > > > > > > > 2009/7/17 <delaage.pierre(a)free.fr> > > > > > > > > > > > Hello, > > > > > > There are many things to check on Windows configuration before > > > > > > checking potential issues in stunnel. > > > > > > > > > > > > At first you should check what is the HTTP authentication mechanism > > > > used by > > > > > > your > > > > > > webdav server : > > > > > > if this server is using "basic plain text authentication", this > > WILL > > > > NOT BE > > > > > > supported by the windows "webdav redirector" (the system component > > that > > > > > > allows > > > > > > you to map a webdav folder to a virtual system drive)...unless you > > set > > > > up > > > > > > this > > > > > > registry key : > > > > > > > > > > > > > > > > [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesWebClientParameters] > > > > > > "UseBasicAuth"=dword:00000001 > > > > > > > > > > > > Check this page for some MS explanations: > > > > > > > > http://technet.microsoft.com/en-us/library/cc787023%28WS.10%29.aspx > > > > > > > > > > > > Something else to check : try to open your webdav location by using > > > > > > "internet > > > > > > explorer 6 or 7"/file-open/check "web folder" checkbox. let us know > > > > whether > > > > > > it > > > > > > works. > > > > > > Try also by "Explorer/Tools/Map network drive", but it is very > > painful > > > > by > > > > > > asking > > > > > > many times for credentials. > > > > > > > > > > > > Yours sincerely, > > > > > > Pierre Delaage > > > > > > > > > > > > Selon Jan-Florian Hilgenberg <florianhilgenberg(a)googlemail.com>: > > > > > > > > > > > > > > > > > > > hi - i want to use webdav through stunnel to provide a > > drive(letter). > > > > > > > system: winxp sp3 > > > > > > > net use http://127.0.0.1/dirname /user:someuser > > > > > > > offers a systemfailure 64... stunnel log said SSL_connect: > > 1408F06B: > > > > > > > error:1408F06B:SSL routines:SSL3_GET_RECORD:bad decompression > > > > > > > but a connection with firefox is running fine. > > > > > > > i am doing try&error for about a week and i am sick now :( > > > > > > > i hope you can help me - thank you > > > > > > > > > > > > > > client=yes > > > > > > > verify=0 > > > > > > > [psuedo-https] > > > > > > > accept = 80 > > > > > > > connect = ssl.studenten-wg-halle.de:443 > > > > > > > TIMEOUTclose = > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >

1 0

using webdav
by Jan-Florian Hilgenberg 17 Jul '09

17 Jul '09

hi - i want to use webdav through stunnel to provide a drive(letter). system: winxp sp3 net use http://127.0.0.1/dirname /user:someuser offers a systemfailure 64... stunnel log said SSL_connect: 1408F06B: error:1408F06B:SSL routines:SSL3_GET_RECORD:bad decompression but a connection with firefox is running fine. i am doing try&error for about a week and i am sick now :( i hope you can help me - thank you client=yes verify=0 [psuedo-https] accept = 80 connect = ssl.studenten-wg-halle.de:443 TIMEOUTclose =

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users