- stunnel-users - stunnel.org

Temporary DH params in stunnel
by Guillermo Rodriguez Garcia 10 May '16

10 May '16

Hi all, The stunnel docs say that starting with stunnel 5.18, DH params are auto-generated every 24 hours and that this "may take several minutes". I see that for this purpose, stunnel uses OpenSSL's DH_generate_parameters[_ex] function. According to the OpenSSL API docs [1], these functions "may run for several hours before finding a suitable prime." [1]: https://www.openssl.org/docs/manmaster/crypto/DH_generate_parameters.html Wouldn't it make sense to use "DSA-like" DH params for this purpose? These are much faster to generate and apparently equally safe. DSA-like DH params are generated using DSA_generate_parameters[ex]. It is the equivalent of passing the -dsaparam option to the openssl dhparam command. Some useful info: - http://security.stackexchange.com/a/95184/109144 - http://dovecot.org/pipermail/dovecot/2015-November/102447.html Best regards, Guillermo Rodriguez Garcia guille.rodriguez(a)gmail.com

1 0

'Integer constant too large' warnings in str.c
by Guillermo Rodriguez Garcia 10 May '16

10 May '16

Hello, Current stunnel (5.32) gives a bunch of warnings in str.c when the CANARY_XXX and MAGIC_XXX constants are used, for example: str.c:101: warning: integer constant is too large for 'long' type Shouldn't these constants be declared with the 'LL' suffix instead of 'L' ? #define CANARY_INITIALIZED 0x0000c0ded0000000LL #define CANARY_UNINTIALIZED 0x0000abadbabe0000LL #define MAGIC_ALLOCATED 0x0000a110c8ed0000LL #define MAGIC_DEALLOCATED 0x0000defec8ed0000LL Best regards, Guillermo Rodriguez Garcia guille.rodriguez(a)gmail.com

2 1

SNI support in OpenSSL
by Guillermo Rodriguez Garcia 08 May '16

08 May '16

Hello all, The stunnel documentation says that SNI requires stunnel to be linked with OpenSSL >= 1.0.0. However, SNI is supported in OpenSSL since 0.9.8f (and actually enabled by default since 0.9.8k). For 0.9.8f and later, OPENSSL_NO_TLSEXT will be defined if TLS extension support (including SNI support) is not compiled into OpenSSL. Taking the above into account, the OpenSSL version check in stunnel (src/common.h) could be relaxed a bit. Instead of: #if OPENSSL_VERSION_NUMBER<0x10000000L #define OPENSSL_NO_TLSEXT #define OPENSSL_NO_PSK #endif /* OpenSSL older than 1.0.0 */ this could be: #if OPENSSL_VERSION_NUMBER<0x00908060L #define OPENSSL_NO_TLSEXT #endif /* OpenSSL older than 0.9.8f */ #if OPENSSL_VERSION_NUMBER<0x10000000L #define OPENSSL_NO_PSK #endif /* OpenSSL older than 1.0.0 */ This would enable SNI on systems using 0.9.8 (Mac OS X for example). Best regards, Guillermo Rodriguez Garcia guille.rodriguez(a)gmail.com

1 0

SSLv3 not working with version 5.06
by Francois Pires 06 May '16

06 May '16

Hi all, We need use of sslv3 but with debian Jessie package version 5.06 this is not working. I have add options -NO_SSLv3 still same. Can you check if my configuration is good and if you have any idea to have sslv3 working with this verison. # stunnel.conf syslog = no cert = /etc/ssl/certs/test.crt.pem key = /etc/ssl/private/test.key.pem CAfile = /etc/ssl/certs/test.ca-bundle # Protocol version (all, SSLv2, SSLv3, TLSv1) sslVersion = all options = -NO_SSLv3 ciphers = AES256-SHA #ciphers = ECDH@STRENGTH:DH@STRENGTH:HIGH:!RC4:!MD5:!DES:!aNULL:!eNULL # Some debugging stuff useful for troubleshooting debug = 7 output = /stunnel.log # Debian and Ubuntu chroot config chroot = /var/lib/stunnel4/ setuid = stunnel4 setgid = stunnel4 pid = /stunnel4.pid # Some performance tunings socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 socket = l:SO_KEEPALIVE=1 socket = r:SO_KEEPALIVE=1 [test] accept = 11443 connect = 127.0.0.1:11444 # stunnel log with openssl test SSL_accept: 14076102: error:14076102:SSL routines:SSL23_GET_CLIENT_HELLO:unsupported protocol openssl s_client -connect 127.0.0.1:11443 -ssl3 CONNECTED(00000003) write:errno=104 --- no peer certificate available --- No client certificate CA names sent --- SSL handshake has read 0 bytes and written 0 bytes --- New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE SSL-Session: Protocol : SSLv3 Cipher : 0000 Session-ID: Session-ID-ctx: Master-Key: Key-Arg : None PSK identity: None PSK identity hint: None SRP username: None Start Time: 1462525363 Timeout : 7200 (sec) Verify return code: 0 (ok) -- Cordialement, François PIRES SysAdmin

2 1

how to pass servername openssl parameter
by Dod 04 May '16

04 May '16

Hello, Little question I use openssl s_client mode to call an https with private PKI so private CAFile CERT and also Key, but I also need to use the parameter "servername" but stunnel seems not support it or may be it has an other syntax ? regards.

1 0

Connect to web app with weak crypto
by Pete McEvoy 29 Apr '16

29 Apr '16

Hi. I have a java web app that uses weak crypto. I would like to be able to access it with a modern browser. Currently the only method that seems to work is links on freebsd 9.3, all other browsers give errors such as: Error performing TLS handshake: The Diffie-Hellman prime sent by the server is not acceptable (not long enough). Obviously it would be better if this was fixed but it is not something I have control of. Would it be possible for me to use stunnel to encapsulate the weak connection within a stronger one so the browser does not complain? I have tried this: ; TLS front-end to a web server [https] client = yes accept = 443 connect = 192.168.1.5:443 cert = /usr/local/etc/stunnel/stunnel.pem Which asks me to make an exception for the self signed cert but then proceeds to fail in same way as before. Cheers -- Pete

1 0

Memory Leak in stunnel 5.31
by Fritz Gschwendner 20 Apr '16

20 Apr '16

Thank you. I tried the new version. Between 10:15 and 10:50 stunnel private bytes grew by ~ 85 MB. Log entries regarding "possible memory leak" look like this at the beginning: 2016.04.20 10:17:01 LOG4[937]: Possible memory leak at .\crypto\asn1\tasn_new.c:179: 71652 allocations 2016.04.20 10:17:01 LOG4[937]: Possible memory leak at .\crypto\asn1\asn1_lib.c:412: 70978 allocations 2016.04.20 10:17:01 LOG4[937]: Possible memory leak at .\crypto\asn1\a_object.c:346: 55283 allocations 2016.04.20 10:17:01 LOG4[937]: Possible memory leak at .\crypto\asn1\a_object.c:315: 55283 allocations 2016.04.20 10:17:01 LOG4[937]: Possible memory leak at .\crypto\asn1\asn1_lib.c:376: 56826 allocations 2016.04.20 10:17:01 LOG4[937]: Possible memory leak at .\crypto\stack\stack.c:162: 13761 allocations 2016.04.20 10:17:01 LOG4[937]: Possible memory leak at .\crypto\stack\stack.c:187: 11448 allocations 2016.04.20 10:17:01 LOG4[937]: Possible memory leak at .\crypto\buffer\buffer.c:118: 11172 allocations 2016.04.20 10:17:01 LOG4[937]: Possible memory leak at .\crypto\asn1\tasn_new.c:342: 10501 allocations ..and later like this: 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\asn1\tasn_new.c:179: 182132 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\asn1\asn1_lib.c:412: 181243 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\asn1\a_object.c:346: 138968 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\asn1\a_object.c:315: 138968 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\asn1\asn1_lib.c:376: 144407 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\stack\stack.c:162: 35294 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\stack\stack.c:187: 29760 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\buffer\buffer.c:118: 28186 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\asn1\tasn_new.c:342: 27649 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\bn\bn_lib.c:303: 27405 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\buffer\buffer.c:74: 18971 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\asn1\x_name.c:136: 18967 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\asn1\x_name.c:383: 18967 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\asn1\a_int.c:208: 18406 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\asn1\a_bitstr.c:158: 18433 allocations 2016.04.20 10:51:04 LOG4[2658]: Possible memory leak at .\crypto\bn\bn_lib.c:272: 13616 allocations If there is anything else I can do, please let me know. -----Ursprüngliche Nachricht----- Von: stunnel-users [mailto:stunnel-users-bounces@stunnel.org] Im Auftrag von Michal Trojnara Gesendet: Dienstag, 19. April 2016 23:31 An: stunnel-users(a)stunnel.org Betreff: Re: [stunnel-users] Memory Leak in stunnel 5.31 On 31.03.2016 22:28, Fritz Gschwendner wrote: > we have a memory leak with stunnel 5.31 in server mode on Windows > Server 2012. Page File Bytes of the stunnel process keep growing. [cut] > I suspect it has something to do with clients not closing the > connection correctly. We have a lot of connections ending like > this: [cut] > Is my suspicion plausible? Can you recommend a change in the > configuration to avoid this issue? Anything else I can do to debug? Your suspicion looks plausible. I have added a heuristic algorithm that identifies excessive memory allocations. Please try stunnel-5.32b2: https://www.stunnel.org/downloads.html The logged warnings should allow identification of the leak source. Best regards, Mike _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

1 0

Stunnel and Eudora error
by EPPack 14 Apr '16

14 Apr '16

I installed stunnel on one of my laptops a few days ago, and it installed uneventfully. I set up one of my gmail accounts in Eudora per directions I got from another Eudora user, and the account works perfectly in Eudora. However, on this machine, I got an unexpected prompt that showed up in a cmd window during the install, which did NOT show up on the other machine: WARNING: can't open config file: /devel/win32/openssl/openssl.cnf Generating a 2048 bit RSA private key ...+++ ..................+++ Writing new private key to 'C:\Program Files (x86)\stunnel\config\stunnel.pem' ---- You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank for some fields there will be a default value, If you enter '.', the field will be left blank. ---- Country Name (2 letter code) [PL]: When I try for an inbound in Eudora, I get the "Error reading from network. Cause: connection aborted due to timeout or other failure (10053). Problem of course is that I'm also unsure if it installed fully/correctly. On the other machine, it installed itself uneventfully as a service, and after I started it (it came in as manual, unstarted), it was fine. This time, tho, it didn't show up in the list of services at all, even tho there was a prompt to start it, which I allowed it to do. That said, I did see it in the start menu, and was able to start it. I also rebooted, and it started up OK. However, after configuring one of my accounts the same way as on the other machine, it's not working, getting the timeout error above. Changed it back to the normal settings for GMail in Eudora, it worked fine, so it wasn't any other cause. I tried adding options = DONT_INSERT_EMPTY_FRAGMENTS to the conf, hopefully in the right place :) and also bumped the Eudora Advanced Network params as also suggested.Nada. The only difference between the two machines, both Windows 7 Pro, is that this one is a 64bit, the other not, which may well be the difference. As I'm new to stunnel, I looked for the manual, but got a 403 on the page. Thoughts? elaine ----- Elaine Pack, Web Analyst, Ivy, VA 99 programming bugs in the code 99 programming bugs Fix one bug, compile it again Now there's 100 bugs in the code! (Repeat until bugs=0)

1 0

developpement hints request
by brahim mohamed 06 Apr '16

06 Apr '16

Hello, My name is Mohamed Aymen, i'm an electronic payment engineer . I recently descovered Stunnel and i'm trying to make some developement and modifications and i need your help with points bellow: 1-steps for compilation on IBM AIX-7 plateform 2-possibility of adding a new source code file(.c) and compiling it with native stunnel files ===some clarifications about source code : 3-i would appreciate if you can indicate me : where exactly in source code i can find the code responsible for accepting buffer from client and the code responsible for accepting buffer (response) from server, also the code responsible for sending data to server and the code responsible for sending server's answer to client (all those on socket mode,on ssl mode and on tls mode) warm regards

1 0

blockscript
by Petr Hojzak 05 Apr '16

05 Apr '16

Hello. Is it possible to setup stunel in a way so it is not detected by services like blocksript? Petr Hojzak https://forpsi-vzr-s126463.mojeid.cz/

2 3

Memory Leak in stunnel 5.31
by Fritz Gschwendner 31 Mar '16

31 Mar '16

Hello, we have a memory leak with stunnel 5.31 in server mode on Windows Server 2012. Page File Bytes of the stunnel process keep growing. The more traffic the faster it's growing, until memory is exhausted and client connects start to fail with: 2016.03.31 15:50:30 LOG3[main]: _beginthread: Exec format error (8) 2016.03.31 15:50:30 LOG3[main]: Connection rejected: create_client failed I suspect it has something to do with clients not closing the connection correctly. We have a lot of connections ending like this: 2016.03.31 09:21:48 LOG3[5156]: SSL_shutdown: Connection reset by peer (WSAECONNRESET) (10054) 2016.03.31 09:21:48 LOG5[5156]: Connection reset: 239 byte(s) sent to SSL, 722 byte(s) sent to socket Is my suspicion plausible? Can you recommend a change in the configuration to avoid this issue? Anything else I can do to debug? The config looks something like this: cert = C:\crt.pem key = C:\key.key ciphers = ALL:!DH:!aNULL:!eNULL:!LOW:!EXP socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 verify = 2 CAfile = C:\All-In-One.pem [test] accept = 23456 connect = 10.10.10.10

1 0

Incoming port ignored
by Ivan De Masi 31 Mar '16

31 Mar '16

Hello, I have a strange problem with my stunnel since a view days: I installed stunnel, because my AV-Scanner (Avira) is not able to scan e-mail traffic of encrypted connections to my mailprovider. So I configured both mail-clients (Thunderbird & Outlook) and AV-Scanner to listen on localhost and stunnel to connect to my mailprovider. This was working fine for a view days, but stoped some days ago and I'm not shure why. Maybe when I installed stunnel as a daemon I run into trouble (will bw another subject). The encrypted connection to my mailprovider is working and e-mails are recived and sent, but the AV-scanner doesn't "see" them anymore. I examined the log and what makes me wonder is, that the when fetching the e-mails, the configured ports (110/143/25) seem to be ignored: "Service [df-pop3s] accepted connection from 127.0.0.1:1878" or "Service [df-pop3s] accepted (FD=472) from 127.0.0.1:1882" The mails on my host are always bypassed on another port (the longer I run stunnel they change/increase) - see the log file. I have installed latest stunnel version (5.31) on Windows 7 (x86). Any ideas? Kind regards, Ivan Main-config: [df-pop3s] client = yes accept = 127.0.0.1:110 connect = sslin.df.eu:995 verify = 3 CAfile = peer-df-pop3s.pem checkHost = sslin.df.eu OCSPaia = yes [df-imaps] client = yes accept = 127.0.0.1:143 connect = sslin.df.eu:993 verify = 3 CAfile = peer-df-imaps.pem checkHost = sslin.df.eu OCSPaia = yes [df-smtps] client = yes accept = 127.0.0.1:25 connect = sslout.df.eu:465 verify = 3 CAfile = peer-df-smtps.pem checkHost = sslout.df.eu OCSPaia = yes Log: 2016.03.30 09:22:21 LOG7[main]: No limit detected for the number of clients 2016.03.30 09:22:21 LOG7[cron]: Cron thread initialized 2016.03.30 09:22:21 LOG5[main]: stunnel 5.31 on x86-pc-msvc-1500 platform 2016.03.30 09:22:21 LOG5[main]: Compiled/running with OpenSSL 1.0.2g-fips 1 Mar 2016 2016.03.30 09:22:21 LOG5[main]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2016.03.30 09:22:21 LOG7[main]: errno: (*_errno()) 2016.03.30 09:22:21 LOG7[ui]: GUI message loop initialized 2016.03.30 09:22:21 LOG5[main]: Reading configuration from file stunnel.conf 2016.03.30 09:22:21 LOG5[main]: UTF-8 byte order mark detected 2016.03.30 09:22:21 LOG5[main]: FIPS mode enabled 2016.03.30 09:22:21 LOG7[main]: Compression disabled 2016.03.30 09:22:21 LOG7[main]: Snagged 64 random bytes from C:/.rnd 2016.03.30 09:22:21 LOG7[main]: Wrote 0 new random bytes to C:/.rnd 2016.03.30 09:22:21 LOG7[main]: PRNG seeded successfully 2016.03.30 09:22:21 LOG6[main]: Initializing service [df-pop3s] 2016.03.30 09:22:23 LOG7[main]: No certificate or private key specified 2016.03.30 09:22:23 LOG7[main]: SSL options: 0x03000004 (+0x03000000l, -0x00000000) 2016.03.30 09:22:23 LOG6[main]: Initializing service [df-imaps] 2016.03.30 09:22:23 LOG7[main]: No certificate or private key specified 2016.03.30 09:22:23 LOG7[main]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2016.03.30 09:22:23 LOG6[main]: Initializing service [df-smtps] 2016.03.30 09:22:23 LOG7[main]: No certificate or private key specified 2016.03.30 09:22:23 LOG7[main]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2016.03.30 09:22:23 LOG5[main]: Configuration successful 2016.03.30 09:22:23 LOG7[main]: Listening file descriptor created (FD=428) 2016.03.30 09:22:23 LOG7[main]: Service [df-pop3s] (FD=428) bound to 127.0.0.1:110 2016.03.30 09:22:23 LOG7[main]: Listening file descriptor created (FD=432) 2016.03.30 09:22:23 LOG7[main]: Service [df-imaps] (FD=432) bound to 127.0.0.1:143 2016.03.30 09:22:23 LOG7[main]: Listening file descriptor created (FD=436) 2016.03.30 09:22:23 LOG7[main]: Service [df-smtps] (FD=436) bound to 127.0.0.1:25 2016.03.30 09:22:42 LOG7[main]: Found 1 ready file descriptor(s) 2016.03.30 09:22:42 LOG7[main]: FD=352 ifds=r-x ofds=--- 2016.03.30 09:22:42 LOG7[main]: FD=428 ifds=r-x ofds=r-- 2016.03.30 09:22:42 LOG7[main]: FD=432 ifds=r-x ofds=--- 2016.03.30 09:22:42 LOG7[main]: Service [df-pop3s] accepted (FD=460) from 127.0.0.1:1878 2016.03.30 09:22:42 LOG7[main]: Creating a new thread 2016.03.30 09:22:42 LOG7[main]: New thread created 2016.03.30 09:22:42 LOG7[0]: Service [df-pop3s] started 2016.03.30 09:22:42 LOG5[0]: Service [df-pop3s] accepted connection from 127.0.0.1:1878 2016.03.30 09:22:42 LOG6[0]: s_connect: connecting 134.119.18.26:995 2016.03.30 09:22:42 LOG7[0]: s_connect: s_poll_wait 134.119.18.26:995: waiting 10 seconds 2016.03.30 09:22:42 LOG5[0]: s_connect: connected 134.119.18.26:995 2016.03.30 09:22:42 LOG5[0]: Service [df-pop3s] connected remote server from 192.168.1.2:1879 2016.03.30 09:22:42 LOG7[0]: Remote descriptor (FD=484) initialized 2016.03.30 09:22:42 LOG6[0]: SNI: sending servername: sslin.df.eu 2016.03.30 09:22:42 LOG7[0]: SSL state (connect): before/connect initialization 2016.03.30 09:22:42 LOG7[0]: SSL state (connect): SSLv2/v3 write client hello A 2016.03.30 09:22:42 LOG7[0]: SSL state (connect): SSLv3 read server hello A 2016.03.30 09:22:42 LOG7[0]: Verification started at depth=2: C=BE, O=GlobalSign nv-sa, OU=Root CA, CN=GlobalSign Root CA 2016.03.30 09:22:42 LOG7[0]: CERT: Pre-verification succeeded 2016.03.30 09:22:42 LOG7[0]: OCSP: Ignoring root certificate 2016.03.30 09:22:42 LOG6[0]: Certificate accepted at depth=2: C=BE, O=GlobalSign nv-sa, OU=Root CA, CN=GlobalSign Root CA 2016.03.30 09:22:42 LOG7[0]: Verification started at depth=1: C=BE, O=GlobalSign nv-sa, CN=AlphaSSL CA - SHA256 - G2 2016.03.30 09:22:42 LOG7[0]: CERT: Pre-verification succeeded 2016.03.30 09:22:42 LOG5[0]: OCSP: Connecting the AIA responder "http://ocsp.globalsign.com/rootr1" 2016.03.30 09:22:46 LOG6[0]: s_connect: connecting 104.16.25.216:80 2016.03.30 09:22:46 LOG7[0]: s_connect: s_poll_wait 104.16.25.216:80: waiting 10 seconds 2016.03.30 09:22:46 LOG5[0]: s_connect: connected 104.16.25.216:80 2016.03.30 09:22:46 LOG7[0]: OCSP: Connected ocsp.globalsign.com:80 2016.03.30 09:22:46 LOG7[0]: OCSP: Response received 2016.03.30 09:22:46 LOG6[0]: OCSP: Status: good 2016.03.30 09:22:46 LOG6[0]: OCSP: This update: Mar 30 05:42:27 2016 GMT 2016.03.30 09:22:46 LOG6[0]: OCSP: Next update: Apr 3 05:42:27 2016 GMT 2016.03.30 09:22:46 LOG5[0]: OCSP: Certificate accepted 2016.03.30 09:22:46 LOG6[0]: Certificate accepted at depth=1: C=BE, O=GlobalSign nv-sa, CN=AlphaSSL CA - SHA256 - G2 2016.03.30 09:22:46 LOG7[0]: Verification started at depth=0: C=DE, OU=Domain Control Validated, CN=sslin.df.eu 2016.03.30 09:22:46 LOG7[0]: CERT: Pre-verification succeeded 2016.03.30 09:22:46 LOG6[0]: CERT: Host name "sslin.df.eu" matched with "sslin.df.eu" 2016.03.30 09:22:46 LOG6[0]: CERT: Locally installed certificate matched 2016.03.30 09:22:46 LOG5[0]: OCSP: Connecting the AIA responder "http://ocsp2.globalsign.com/gsalphasha2g2" 2016.03.30 09:22:46 LOG6[0]: s_connect: connecting 104.16.25.216:80 2016.03.30 09:22:46 LOG7[0]: s_connect: s_poll_wait 104.16.25.216:80: waiting 10 seconds 2016.03.30 09:22:46 LOG5[0]: s_connect: connected 104.16.25.216:80 2016.03.30 09:22:46 LOG7[0]: OCSP: Connected ocsp2.globalsign.com:80 2016.03.30 09:22:46 LOG7[0]: OCSP: Response received 2016.03.30 09:22:46 LOG6[0]: OCSP: Status: good 2016.03.30 09:22:46 LOG6[0]: OCSP: This update: Mar 27 21:09:59 2016 GMT 2016.03.30 09:22:46 LOG6[0]: OCSP: Next update: Mar 31 21:09:59 2016 GMT 2016.03.30 09:22:46 LOG5[0]: OCSP: Certificate accepted 2016.03.30 09:22:46 LOG5[0]: Certificate accepted at depth=0: C=DE, OU=Domain Control Validated, CN=sslin.df.eu 2016.03.30 09:22:46 LOG7[0]: SSL state (connect): SSLv3 read server certificate A 2016.03.30 09:22:46 LOG7[0]: SSL state (connect): SSLv3 read server key exchange A 2016.03.30 09:22:46 LOG6[0]: Client certificate not requested 2016.03.30 09:22:46 LOG7[0]: SSL state (connect): SSLv3 read server done A 2016.03.30 09:22:46 LOG7[0]: SSL state (connect): SSLv3 write client key exchange A 2016.03.30 09:22:46 LOG7[0]: SSL state (connect): SSLv3 write change cipher spec A 2016.03.30 09:22:46 LOG7[0]: SSL state (connect): SSLv3 write finished A 2016.03.30 09:22:46 LOG7[0]: SSL state (connect): SSLv3 flush data 2016.03.30 09:22:46 LOG7[0]: SSL state (connect): SSLv3 read server session ticket A 2016.03.30 09:22:46 LOG7[0]: SSL state (connect): SSLv3 read finished A 2016.03.30 09:22:46 LOG7[0]: 1 client connect(s) requested 2016.03.30 09:22:46 LOG7[0]: 1 client connect(s) succeeded 2016.03.30 09:22:46 LOG7[0]: 0 client renegotiation(s) requested 2016.03.30 09:22:46 LOG7[0]: 0 session reuse(s) 2016.03.30 09:22:46 LOG6[0]: SSL connected: new session negotiated 2016.03.30 09:22:46 LOG7[0]: Peer certificate was cached (4539 bytes) 2016.03.30 09:22:46 LOG6[0]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES128-GCM-SHA256 (128-bit encryption) 2016.03.30 09:22:46 LOG7[0]: Compression: null, expansion: null 2016.03.30 09:23:01 LOG7[0]: SSL alert (read): warning: close notify 2016.03.30 09:23:01 LOG6[0]: SSL closed (SSL_read) 2016.03.30 09:23:01 LOG7[0]: Sent socket write shutdown 2016.03.30 09:23:01 LOG6[0]: Read socket closed (readsocket) 2016.03.30 09:23:01 LOG7[0]: Sending close_notify alert 2016.03.30 09:23:01 LOG7[0]: SSL alert (write): warning: close notify 2016.03.30 09:23:01 LOG6[0]: SSL_shutdown successfully sent close_notify alert 2016.03.30 09:23:01 LOG5[0]: Connection closed: 304 byte(s) sent to SSL, 545297 byte(s) sent to socket 2016.03.30 09:23:01 LOG7[0]: Remote descriptor (FD=484) closed 2016.03.30 09:23:01 LOG7[0]: Local descriptor (FD=460) closed 2016.03.30 09:23:01 LOG7[0]: Service [df-pop3s] finished (0 left) 2016.03.30 09:23:02 LOG7[main]: Found 1 ready file descriptor(s) 2016.03.30 09:23:02 LOG7[main]: FD=352 ifds=r-x ofds=--- 2016.03.30 09:23:02 LOG7[main]: FD=428 ifds=r-x ofds=r-- 2016.03.30 09:23:02 LOG7[main]: FD=432 ifds=r-x ofds=--- 2016.03.30 09:23:02 LOG7[main]: Service [df-pop3s] accepted (FD=472) from 127.0.0.1:1882 2016.03.30 09:23:02 LOG7[main]: Creating a new thread 2016.03.30 09:23:02 LOG7[main]: New thread created 2016.03.30 09:23:02 LOG7[1]: Service [df-pop3s] started 2016.03.30 09:23:02 LOG5[1]: Service [df-pop3s] accepted connection from 127.0.0.1:1882 2016.03.30 09:23:02 LOG6[1]: s_connect: connecting 134.119.18.26:995 2016.03.30 09:23:02 LOG7[1]: s_connect: s_poll_wait 134.119.18.26:995: waiting 10 seconds 2016.03.30 09:23:02 LOG5[1]: s_connect: connected 134.119.18.26:995 2016.03.30 09:23:02 LOG5[1]: Service [df-pop3s] connected remote server from 192.168.1.2:1883 2016.03.30 09:23:02 LOG7[1]: Remote descriptor (FD=468) initialized 2016.03.30 09:23:02 LOG6[1]: SNI: sending servername: sslin.df.eu 2016.03.30 09:23:02 LOG7[1]: SSL state (connect): before/connect initialization 2016.03.30 09:23:02 LOG7[1]: SSL state (connect): SSLv3 write client hello A 2016.03.30 09:23:02 LOG7[1]: SSL state (connect): SSLv3 read server hello A 2016.03.30 09:23:02 LOG7[1]: SSL state (connect): SSLv3 read finished A 2016.03.30 09:23:02 LOG7[1]: SSL state (connect): SSLv3 write change cipher spec A 2016.03.30 09:23:02 LOG7[1]: SSL state (connect): SSLv3 write finished A 2016.03.30 09:23:02 LOG7[1]: SSL state (connect): SSLv3 flush data 2016.03.30 09:23:02 LOG7[1]: 2 client connect(s) requested 2016.03.30 09:23:02 LOG7[1]: 2 client connect(s) succeeded 2016.03.30 09:23:02 LOG7[1]: 0 client renegotiation(s) requested 2016.03.30 09:23:02 LOG7[1]: 1 session reuse(s) 2016.03.30 09:23:02 LOG6[1]: SSL connected: previous session reused 2016.03.30 09:23:08 LOG7[1]: SSL alert (read): warning: close notify 2016.03.30 09:23:08 LOG6[1]: SSL closed (SSL_read) 2016.03.30 09:23:08 LOG7[1]: Sent socket write shutdown 2016.03.30 09:23:08 LOG6[1]: Read socket closed (readsocket) 2016.03.30 09:23:08 LOG7[1]: Sending close_notify alert 2016.03.30 09:23:08 LOG7[1]: SSL alert (write): warning: close notify 2016.03.30 09:23:08 LOG6[1]: SSL_shutdown successfully sent close_notify alert 2016.03.30 09:23:08 LOG5[1]: Connection closed: 149 byte(s) sent to SSL, 336471 byte(s) sent to socket 2016.03.30 09:23:08 LOG7[1]: Remote descriptor (FD=468) closed 2016.03.30 09:23:08 LOG7[1]: Local descriptor (FD=472) closed 2016.03.30 09:23:08 LOG7[1]: Service [df-pop3s] finished (0 left) 2016.03.30 09:23:21 LOG6[cron]: Executing cron jobs 2016.03.30 09:23:21 LOG6[cron]: Cron jobs completed in 0 seconds 2016.03.30 09:23:21 LOG7[cron]: Waiting 86400 seconds

4 10

Re: [stunnel-users] Connecting stunnels
by Ludolf Holzheid 31 Mar '16

31 Mar '16

On Thu, 2016-03-31 09:39:49 -0400, Carter Browne wrote: > A single instance of stunnel can be a server or a client depending on > the settings. For this configuration, you would want host3 to be a > server not a client. > Thus, you need the intermediate port on server2 to server as both a > client and a server: > > In your configuration files you would need: > > Host1: > [secure_telnet] > accept = local:23 > connect = host2:host2port1 > client = yes > > Host2: > [incoming_telnet_relay] > accept = host2:host2port1 > connect = local:host2port2 > client = no > > [outgoing_telnet_relay] > accept =local:host2port2 > connect = host3:host3port1 > client = yes > > Host3: > [incoming_telnet] > accept = host3:host3port1 > connect = local:23 Carter, What's the advantage of this setup over a direct connection from Host1 to Host3? Host1: [secure_telnet] accept = local:23 connect = host3:host3port1 client = yes Host3: [incoming_telnet] accept = host3:host3port1 connect = local:23 client = no If e.g. Host3 isn't directly reachable from Host1, a simple port forwarding (without decryption and re-encryption) on Host2 would suffice. Ludolf -- Ludolf Holzheid Bihl+Wiedemann GmbH Floßwörthstraße 41 68199 Mannheim, Germany Tel: +49 621 33996-0 Fax: +49 621 3392239 mailto:lholzheid@bihl-wiedemann.de http://www.bihl-wiedemann.de Sitz der Gesellschaft: Mannheim Geschäftsführer: Jochen Bihl, Bernhard Wiedemann Amtsgericht Mannheim, HRB 5796

2 3

Connecting stunnels
by Juhasz Gabor 31 Mar '16

31 Mar '16

Hi, I am newbie in stunnel world so sorry for my question if it was already answered earlier. I have the following task to solve somehow : We have 1 server with 2 stunnel connections (any kind). We have e.g. http communicatoin via tunnels. Is there any support in stunnel to connect them somehow. Probably we do not need bidirectional communication. [client1]----- stunnel 1---> [server]------stunnel2 ----->[client2] So [client1] --> [client2] If there is no support in stunnel do you have any idea how to do it? Kind regards, Gabor

2 9

Please help
by Steve Wollan 30 Mar '16

30 Mar '16

Installed stunnel-5.31 (stunnel-5.31-installer) so that I can get MT4, a Forex trade platform, to send me mails to my Gmail account. I was told this was necessary because MT4 doesn't support SSL Authentication. I attempted to start and received this; [image: Inline image 1] It looks like a config file issue but also would not bind? Is this one issue? I was told all I needed to do with the config file is this; [image: Inline image 2] Can you please simply help me with the config file? I'm lost and need help. Thanks to all in advance for your help.

3 2

Using stunnel for TLS with Geotrust cert?
by Jon Bogaty 28 Mar '16

28 Mar '16

Hey stunnel-users, I'm having an issue both on stunnel4 and on 5 which I think is more related to a lack of understanding of the difference between how stunnel uses intermediate chain certs and root CA certs. I have from Geotrust, who signs my SSL certs, an intermediate.crt which by the stunnel docs should be catted into one stunnel.pem with the cert for my domain and the private key. The issue is when I setup everything on the server and try to connect with a client I either get for "verify 2" warnings about MiTM authentication problems, or for "verify 3" or "verify 4", which should disable CA checking altogether to my understanding, "Please specify CApath". I feel like I'm missing something critical in terms of pieces. The goal is to use stunnel as a proxy for mysql and the conf is pretty barebones: sslVersion = TLSv1 setuid = stunnel4 setgid = stunnel4 pid = /var/lib/stunnel4/stunnel4.pid debug = 7 foreground = yes socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 cert = /etc/stunnel/stunnel.pem verify = 3 [mysqls] accept = 3307 connect = localhost:3306 It runs just fine using supervisor. Any thoughts and how I could make the handshake work between server and client using geotrust's intermediate crt as the CA cert, or something similar? It contains certs down to the root level. Thanks! Jon

1 0

Install directory with /S /D=[path]
by Yoshitake, Aaron 23 Mar '16

23 Mar '16

Hi all, I'm making an installer that installs stunnel as a dependency, and I'd like to customize its install directory while running it in silent mode. Per the NSIS docs, my command has the /S switch for silent mode, but when I try /D=[path], the installer ignores it and installs to Program Files (x86)/stunnel anyway. Is there a workaround for this? Thanks, Aaron

2 2

Latest x-forwarded-for patch for Stunnel 5.31
by Nelson 20 Mar '16

20 Mar '16

Hi, Has anyone knows a compatible patch for the latest version 5.31? Can anyone provide the link? The patch that I have only works on 5.02 but not on 5.31

1 0

Minor bug in resolver.c
by Jose Alf. 16 Mar '16

16 Mar '16

Hello Michal, I found a small bug on resolver.c. In function addrlist_resolve, in source line 318 for version 5.31, there is the instruction: num+=name2addrlist(addr_list, host->name) I think It should be: num = name2addrlist(addr_list, host->name) I found this because I created a service with three connect lines, like this: [ldaps] client=yes accept=127.0.0.1:7000 connect=10.1.1.1:636 connect=10.2.2.2:636 connect=10.3.2.3:636 And I found this line in the log: 2016.03.15 22:23:34 LOG6[0]: failover: round-robin, starting at entry #6 #6? It should be <= #2 ! I checked the source code, added some s_log instructions and found that the problem. For 3 addresses num variable was set to 6 (1 + 2 + 3) and that was returned by addrlist_resolve. Hope this helps. And thanks again for your hard work on stunnel. Best Regards Jose A. Diaz

1 0

Possible signal handling bug in fork mode
by Philippe Anctil 15 Mar '16

15 Mar '16

Hi, In fork mode, sending a sigterm signal to a child is caught by the parent. I suspect it has something to do with signal_pipe being shared by the child and parent after the fork. Here I sent a signal to the parent while a child process was also running. The parent shut down as expected. After sending sigterm, the child remains. Processes before sigterm: UID PID PPID C STIME TTY STAT TIME CMD user 1423 1 0 10:32 ? Ss 0:00 /usr/local/stunnel/bin/stunnel.bin /usr/local/stunnel/etc/server.conf user 1921 1423 0 10:37 ? S 0:00 \_ /usr/local/stunnel/bin/stunnel.bin /usr/local/stunnel/etc/server.conf selected pid 1423 Processes after: UID PID PPID C STIME TTY STAT TIME CMD user 1921 1 0 10:37 ? S 0:00 /usr/local/stunnel/bin/stunnel.bin /usr/local/stunnel/etc/server.conf Here I sent the signal to the child. The parent shut down and the child completed normally. Processes before: UID PID PPID C STIME TTY STAT TIME CMD user 1276 1 0 10:31 ? Ss 0:00 /usr/local/stunnel/bin/stunnel.bin /usr/local/stunnel/etc/server.conf user 1309 1276 0 10:31 ? S 0:00 \_ /usr/local/stunnel/bin/stunnel.bin /usr/local/stunnel/etc/server.conf selected pid 1309 Processes after: UID PID PPID C STIME TTY STAT TIME CMD user 1309 1 0 10:31 ? S 0:00 /usr/local/stunnel/bin/stunnel.bin /usr/local/stunnel/etc/server.conf I know I should be trying threads. I will eventually. I can only switch once I validate it can sustain our level of traffic. Fork has done that flawlessly for many years now. Best regards, -- Philippe Anctil

2 5

windows certificate store
by Jim Howland 11 Mar '16

11 Mar '16

Hi I am running a windows instance of stunnel as a client and A Linux version as the server When I set this on the Windows side : engine = capi and this in my section: engineId = capi I get an error message that CApath or CAFile still needs to be set. My understanding is that these setting should make stunnel use the Windows certificate store to find a root and intermediate certificate to authenticate my (Symantec generated) certificate and should not require a CAfile. Here is my windows config : ; ************************************************************************** ; * Global options * ; ************************************************************************** ; Debugging stuff (may be useful for troubleshooting) debug = debug ;output = stunnel.log ; Enable FIPS 140-2 mode if needed for compliance ;fips = yes ; Microsoft CryptoAPI engine allows for authentication with private keys ; stored in the Windows certificate store ; Each section using this feature also needs the "engineId = capi" option engine = capi [FIX] client = yes accept = 9021 connect = fixuat.au.abnamroclearing.com:9443<http://fixuat.au.abnamroclearing.com:9443> cert = C:\certs\jim.howland.cer key = C:\certs\jim.howland.key verify = 3 ; CAfile = C:\certs\veriSign_root_certificates\symantec-class3-G5.cer engineId = capi and here is the error [ ] Cron thread initialized [ ] No limit detected for the number of clients [.] stunnel 5.31 on x86-pc-msvc-1500 platform [.] Compiled/running with OpenSSL 1.0.2g-fips 1 Mar 2016 [.] Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI [ ] errno: (*_errno()) [ ] GUI message loop initialized [.] Reading configuration from file stunnel.conf [.] UTF-8 byte order mark detected [ ] Enabling support for engine "capi" [ ] Initializing engine #1 (capi) [ ] Engine #1 (capi) initialized [.] FIPS mode disabled [ ] Compression disabled [ ] Snagged 64 random bytes from C:/.rnd [ ] Wrote 0 new random bytes to C:/.rnd [ ] PRNG seeded successfully [ ] Initializing service [FIX] [!] Service [FIX]: Either "CAfile" or "CApath" has to be configured [!] Server is down Any ideas? Kind Regards, Jim Howland | Linux Engineer ABN AMRO | ABN AMRO Clearing Sydney Pty Ltd Level 8, 50 Bridge Street | Sydney NSW 2000 | Australia Tel: +61 (0)2 9151 3124 | Mobile: +61 (0)417 885818 | Internet abnamroclearing.com ******** This message (including any attachments ) is confidential and is intended solely for the use of the individual or entity to whom it is addressed. If you have received this message by mistake please notify the sender by return email and delete this message from your system. Any unauthorised use or dissemination of this message in whole or in part is strictly prohibited. ********

1 0

Error 1408F10B talking to Active Directory on port 636
by Matthew Slowe 07 Mar '16

07 Mar '16

Hi all! We’ve been using stunnel as part of a vendor supplied product for some time to connect a large application running in an application server on Windows to Active Directory for authentication via LDAPS (for some reason, it only natively supports LDAP!). Anyway, it’s been working fine until a couple of weeks ago when we started getting intermittent failures against all of our configured Domain Controllers (the upstream LDAPS servers). With no change in STunnel or DC config, some connections would abort with the following log: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number … while others worked fine. The error is not limited to any one of the upstream DCs nor does it occur for every request. We’ve updated STunnel to the latest version (5.31) and the problem remains running on Windows 2008 R2 SP1. Below are two transactions from the same instance of STunnel connecting to the same DC one which works and one which doesn’t (IP addresses obfuscated). Config in use: {{{ client = yes debug = 7 output = e:\prog\stunnel\stunnel.log options = NO_SSLv2 [ldaps] accept = localhost:389 connect = domain.local:636 }}} Any thoughts gratefully received! Thanks, Matthew Fails ==== 2016.03.04 15:20:25 LOG7[14]: Service [ldaps] started 2016.03.04 15:20:25 LOG5[14]: Service [ldaps] accepted connection from 127.0.0.1:63130 2016.03.04 15:20:25 LOG6[14]: failover: round-robin, starting at entry #2 2016.03.04 15:20:25 LOG6[14]: s_connect: connecting 10.10.1.254:636 2016.03.04 15:20:25 LOG7[14]: s_connect: s_poll_wait 10.10.1.254:636: waiting 10 seconds 2016.03.04 15:20:25 LOG5[14]: s_connect: connected 10.10.1.254:636 2016.03.04 15:20:25 LOG5[14]: Service [ldaps] connected remote server from 10.10.1.225:63131 2016.03.04 15:20:25 LOG7[14]: Remote socket (FD=448) initialized 2016.03.04 15:20:25 LOG6[14]: SNI: sending servername: ad.kent.ac.uk 2016.03.04 15:20:25 LOG7[14]: SSL state (connect): before/connect initialization 2016.03.04 15:20:25 LOG7[14]: SSL state (connect): SSLv3 write client hello A 2016.03.04 15:20:25 LOG7[14]: SSL alert (write): fatal: protocol version 2016.03.04 15:20:25 LOG3[14]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number 2016.03.04 15:20:25 LOG5[14]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2016.03.04 15:20:25 LOG7[14]: Remote socket (FD=448) closed 2016.03.04 15:20:25 LOG7[14]: Local socket (FD=492) closed 2016.03.04 15:20:25 LOG7[14]: Service [ldaps] finished (0 left) Works ====== 2016.03.02 18:18:01 LOG7[204]: Service [ldaps] started 2016.03.02 18:18:01 LOG5[204]: Service [ldaps] accepted connection from 127.0.0.1:52873 2016.03.02 18:18:01 LOG6[204]: failover: round-robin, starting at entry #0 2016.03.02 18:18:01 LOG6[204]: s_connect: connecting 10.10.1.254:636 2016.03.02 18:18:01 LOG7[204]: s_connect: s_poll_wait 10.10.1.254:636: waiting 10 seconds 2016.03.02 18:18:01 LOG5[204]: s_connect: connected 10.10.1.254:636 2016.03.02 18:18:01 LOG5[204]: Service [ldaps] connected remote server from 10.10.1.223:52874 2016.03.02 18:18:01 LOG7[204]: Remote socket (FD=492) initialized 2016.03.02 18:18:01 LOG6[204]: SNI: sending servername: ad.kent.ac.uk 2016.03.02 18:18:01 LOG7[204]: SSL state (connect): before/connect initialization 2016.03.02 18:18:01 LOG7[204]: SSL state (connect): SSLv3 write client hello A 2016.03.02 18:18:01 LOG7[204]: SSL state (connect): SSLv3 read server hello A 2016.03.02 18:18:01 LOG6[204]: Certificate verification disabled 2016.03.02 18:18:01 LOG6[204]: Certificate verification disabled 2016.03.02 18:18:01 LOG7[204]: SSL state (connect): SSLv3 read server certificate A 2016.03.02 18:18:01 LOG7[204]: SSL state (connect): SSLv3 read server key exchange A 2016.03.02 18:18:01 LOG7[204]: SSL state (connect): SSLv3 read server certificate request A 2016.03.02 18:18:01 LOG7[204]: SSL state (connect): SSLv3 read server done A 2016.03.02 18:18:01 LOG7[204]: SSL state (connect): SSLv3 write client certificate A 2016.03.02 18:18:01 LOG7[204]: SSL state (connect): SSLv3 write client key exchange A 2016.03.02 18:18:01 LOG7[204]: SSL state (connect): SSLv3 write change cipher spec A 2016.03.02 18:18:01 LOG7[204]: SSL state (connect): SSLv3 write finished A 2016.03.02 18:18:01 LOG7[204]: SSL state (connect): SSLv3 flush data 2016.03.02 18:18:01 LOG7[204]: SSL state (connect): SSLv3 read finished A 2016.03.02 18:18:01 LOG7[204]: 205 client connect(s) requested 2016.03.02 18:18:01 LOG7[204]: 205 client connect(s) succeeded 2016.03.02 18:18:01 LOG7[204]: 0 client renegotiation(s) requested 2016.03.02 18:18:01 LOG7[204]: 0 session reuse(s) 2016.03.02 18:18:01 LOG6[204]: SSL connected: new session negotiated 2016.03.02 18:18:01 LOG7[204]: Deallocating application specific data for addr index 2016.03.02 18:18:01 LOG6[204]: Negotiated TLSv1 ciphersuite ECDHE-RSA-AES256-SHA (256-bit encryption) 2016.03.02 18:18:01 LOG7[204]: Compression: null, expansion: null 2016.03.02 18:18:01 LOG6[204]: Read socket closed (readsocket) 2016.03.02 18:18:01 LOG7[204]: Sending close_notify alert 2016.03.02 18:18:01 LOG7[204]: SSL alert (write): warning: close notify 2016.03.02 18:18:01 LOG6[204]: SSL_shutdown successfully sent close_notify alert 2016.03.02 18:18:01 LOG3[204]: SSL_read: Connection reset by peer (WSAECONNRESET) (10054) 2016.03.02 18:18:01 LOG5[204]: Connection reset: 276 byte(s) sent to SSL, 44 byte(s) sent to socket 2016.03.02 18:18:01 LOG7[204]: Remote socket (FD=492) closed 2016.03.02 18:18:01 LOG7[204]: Local socket (FD=456) closed 2016.03.02 18:18:01 LOG7[204]: Service [ldaps] finished (0 left) -- Matthew Slowe | Server Infrastructure Officer IT Infrastructure, Information Services, University of Kent Room S21, Cornwallis South Canterbury, Kent, CT2 7NZ, UK Tel: +44 (0)1227 824265 www.kent.ac.uk/is | @UnikentUnseenIT | @UKCLibraryIt PGP: https://keybase.io/fooflington

1 0

CRL checking
by Fritz Gschwendner 03 Mar '16

03 Mar '16

Hello, I noticed a change in functionality of CRL checking in server mode somewhere between stunnel version 5.2.00 and 5.31.00. We have multiple services listening for incoming connections and a global option CRLfile = crls.pem, with crls.pem containing a few CRLs but not one for every possible client certificate, and client certificates not all having a CRL distribution point configured. This worked with the old version in the sense that all clients could connect. I don't know If CRL checking really worked, they are all empty and I can't test. With the new version client certificates with no CRL and no CRL distribution point configured got rejected with errors "CERT: Pre-verification error: unable to get certificate CRL" and "SSL_accept: 14089086: error:14089086:SSL routines:ssl3_get_client_certificate:certificate verify failed" If I remove the global entry for CRLfile with the new version, all clients can connect again. I guess I could enter the CRLfile option on service level, but it could be that some client certificates connecting to a specific service have a CRL and some don't. My questions: Is this intended behaviour? I find it logical to check the CRL of a client certificate, if there is one in the CRLfile, if there isn't, to not check. Does a CRL distribution point configured in a client certificate play any role?

2 1

Problem with Stunnel 5.31 and Openssl 1.0.2g
by Carter Browne 02 Mar '16

02 Mar '16

I have a confusing problem I cannot figure out: I have two systems: one Redhat 5.10 x86, the other CentOs 5.10 x86 I compiled openssl version 1.0.2g on both systems I compiled stunnel 5.31 on both systems In both cases, this was updating older working verions of openssl and stunnel. On the Redhat system I used gcc44 On the CentOS system i used gcc4.1 The CentOS system works as before. On the Redhat system all self signed certificates are rejected. As I only use self-signed certificates to identify a set of known hosts, this is a problem for me. I tried various verify optios (2 3 4) both nothing changed. Any idea on how to fix this problem. What information can I provide you with to help? Thanks, Carter Carter Browne cbrowne(a)cbcs-usa.com

2 1

Slow sending email through stunnel to Office365
by ajreynolds＠san.rr.com 01 Mar '16

01 Mar '16

After a bit of experimentation, I've succeeded in getting stunnel 5.31 running on my Windows 2008 r2 server and sending email through SMTP through Office365. My problem now is that it's quite slow. I can see a point in the log file where it stops for 5 seconds or more for each email message. Are there any parameter for stunnel that might help, or do I have to just accept that Office365 is slow? Here is my stunnel.conf file: debug = 7 output = stunnel.log [ms-smtp] protocol = smtp client = yes accept = 587 connect = smtp.office365.com:587 And here is the log file for an email transmission. Notice the 5 second pause at 12:31:04. Is there a way to eliminate this pause? 2016.03.01 12:30:21 LOG7[cron]: Cron thread initialized 2016.03.01 12:30:21 LOG7[main]: No limit detected for the number of clients 2016.03.01 12:30:21 LOG5[main]: stunnel 5.31 on x86-pc-msvc-1500 platform 2016.03.01 12:30:21 LOG5[main]: Compiled/running with OpenSSL 1.0.2g-fips 1 Mar 2016 2016.03.01 12:30:21 LOG5[main]: Threading:WIN32 Sockets:SELECT,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2016.03.01 12:30:21 LOG7[main]: errno: (*_errno()) 2016.03.01 12:30:21 LOG7[service]: GUI message loop initialized 2016.03.01 12:30:21 LOG5[main]: Reading configuration from file stunnel.conf 2016.03.01 12:30:21 LOG5[main]: UTF-8 byte order mark detected 2016.03.01 12:30:21 LOG5[main]: FIPS mode disabled 2016.03.01 12:30:21 LOG7[main]: Compression disabled 2016.03.01 12:30:21 LOG7[main]: Snagged 64 random bytes from C:/.rnd 2016.03.01 12:30:21 LOG7[main]: Wrote 1024 new random bytes to C:/.rnd 2016.03.01 12:30:21 LOG7[main]: PRNG seeded successfully 2016.03.01 12:30:21 LOG6[main]: Initializing service [ms-smtp] 2016.03.01 12:30:21 LOG7[main]: No certificate or private key specified 2016.03.01 12:30:21 LOG4[main]: Service [ms-smtp] needs authentication to prevent MITM attacks 2016.03.01 12:30:21 LOG7[main]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2016.03.01 12:30:21 LOG5[main]: Configuration successful 2016.03.01 12:30:21 LOG7[main]: Listening file descriptor created (FD=424) 2016.03.01 12:30:21 LOG7[main]: Service [ms-smtp] (FD=424) bound to 0.0.0.0:587 2016.03.01 12:30:58 LOG7[main]: Found 1 ready file descriptor(s) 2016.03.01 12:30:58 LOG7[main]: FD=388 ifds=r-x ofds=--- 2016.03.01 12:30:58 LOG7[main]: Service [ms-smtp] accepted (FD=440) from 192.168.8.58:55266 2016.03.01 12:30:58 LOG7[main]: Creating a new thread 2016.03.01 12:30:58 LOG7[main]: New thread created 2016.03.01 12:30:58 LOG7[0]: Service [ms-smtp] started 2016.03.01 12:30:58 LOG5[0]: Service [ms-smtp] accepted connection from 192.168.8.58:55266 2016.03.01 12:30:58 LOG6[0]: failover: round-robin, starting at entry #3 2016.03.01 12:30:58 LOG6[0]: s_connect: connecting 132.245.34.194:587 2016.03.01 12:30:58 LOG7[0]: s_connect: s_poll_wait 132.245.34.194:587: waiting 10 seconds 2016.03.01 12:30:58 LOG5[0]: s_connect: connected 132.245.34.194:587 2016.03.01 12:30:58 LOG5[0]: Service [ms-smtp] connected remote server from 192.168.8.14:55477 2016.03.01 12:30:58 LOG7[0]: Remote descriptor (FD=460) initialized 2016.03.01 12:30:59 LOG7[0]: <- 220 CY1PR21CA0008.outlook.office365.com Microsoft ESMTP MAIL Service ready at Tue, 1 Mar 2016 20:30:58 +0000 2016.03.01 12:30:59 LOG7[0]: -> 220 CY1PR21CA0008.outlook.office365.com Microsoft ESMTP MAIL Service ready at Tue, 1 Mar 2016 20:30:58 +0000 2016.03.01 12:30:59 LOG7[0]: -> EHLO localhost 2016.03.01 12:30:59 LOG7[0]: <- 250-CY1PR21CA0008.outlook.office365.com Hello [#.#.#.#] 2016.03.01 12:30:59 LOG7[0]: <- 250-SIZE 157286400 2016.03.01 12:30:59 LOG7[0]: <- 250-PIPELINING 2016.03.01 12:30:59 LOG7[0]: <- 250-DSN 2016.03.01 12:30:59 LOG7[0]: <- 250-ENHANCEDSTATUSCODES 2016.03.01 12:30:59 LOG7[0]: <- 250-STARTTLS 2016.03.01 12:30:59 LOG7[0]: <- 250-8BITMIME 2016.03.01 12:30:59 LOG7[0]: <- 250-BINARYMIME 2016.03.01 12:30:59 LOG7[0]: <- 250 CHUNKING 2016.03.01 12:30:59 LOG7[0]: -> STARTTLS 2016.03.01 12:30:59 LOG7[0]: <- 220 2.0.0 SMTP server ready 2016.03.01 12:30:59 LOG6[0]: SNI: sending servername: smtp.office365.com 2016.03.01 12:30:59 LOG7[0]: SSL state (connect): before/connect initialization 2016.03.01 12:30:59 LOG7[0]: SSL state (connect): SSLv2/v3 write client hello A 2016.03.01 12:30:59 LOG7[0]: SSL state (connect): SSLv3 read server hello A 2016.03.01 12:30:59 LOG6[0]: Certificate verification disabled 2016.03.01 12:30:59 LOG6[0]: Certificate verification disabled 2016.03.01 12:30:59 LOG7[0]: SSL state (connect): SSLv3 read server certificate A 2016.03.01 12:30:59 LOG7[0]: SSL state (connect): SSLv3 read server key exchange A 2016.03.01 12:30:59 LOG6[0]: Empty client CA list 2016.03.01 12:30:59 LOG7[0]: SSL state (connect): SSLv3 read server certificate request A 2016.03.01 12:30:59 LOG7[0]: SSL state (connect): SSLv3 read server done A 2016.03.01 12:30:59 LOG7[0]: SSL state (connect): SSLv3 write client certificate A 2016.03.01 12:30:59 LOG7[0]: SSL state (connect): SSLv3 write client key exchange A 2016.03.01 12:30:59 LOG7[0]: SSL state (connect): SSLv3 write change cipher spec A 2016.03.01 12:30:59 LOG7[0]: SSL state (connect): SSLv3 write finished A 2016.03.01 12:30:59 LOG7[0]: SSL state (connect): SSLv3 flush data 2016.03.01 12:30:59 LOG7[0]: SSL state (connect): SSLv3 read finished A 2016.03.01 12:30:59 LOG7[0]: 1 client connect(s) requested 2016.03.01 12:30:59 LOG7[0]: 1 client connect(s) succeeded 2016.03.01 12:30:59 LOG7[0]: 0 client renegotiation(s) requested 2016.03.01 12:30:59 LOG7[0]: 0 session reuse(s) 2016.03.01 12:30:59 LOG6[0]: SSL connected: new session negotiated 2016.03.01 12:30:59 LOG7[0]: Peer certificate was cached (4882 bytes) 2016.03.01 12:30:59 LOG6[0]: Negotiated TLSv1.2 ciphersuite ECDHE-RSA-AES256-SHA384 (256-bit encryption) 2016.03.01 12:30:59 LOG7[0]: Compression: null, expansion: null 2016.03.01 12:31:04 LOG6[0]: Read socket closed (readsocket) 2016.03.01 12:31:04 LOG7[0]: Sending close_notify alert 2016.03.01 12:31:04 LOG7[0]: SSL alert (write): warning: close notify 2016.03.01 12:31:04 LOG6[0]: SSL_shutdown successfully sent close_notify alert 2016.03.01 12:31:04 LOG6[0]: SSL socket closed (SSL_read) 2016.03.01 12:31:04 LOG7[0]: Sent socket write shutdown 2016.03.01 12:31:04 LOG5[0]: Connection closed: 413 byte(s) sent to SSL, 635 byte(s) sent to socket 2016.03.01 12:31:04 LOG7[0]: Remote descriptor (FD=460) closed 2016.03.01 12:31:04 LOG7[0]: Local descriptor (FD=440) closed 2016.03.01 12:31:04 LOG7[0]: Service [ms-smtp] finished (0 left) Thanks very much, Andy

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users