- stunnel-users - stunnel.org

Timeout issue I think
by Ben Bazian 16 Aug '17

16 Aug '17

I have a legacy server that uses IMAP but does not support TLS. I am using stunnel and since implementation I am getting errors when an email has a larger attachment. My application process these attachments and when done (sometimes can take 5-10 minutes) it marks the message for deletion. When all messages are completed it purges the emails from the box. My app is throwing an error when it tries to delete the message (see below). I think it may be due to stunnel closing the connection to the server? Not quite sure. javax.mail.FolderClosedException at com.sun.mail.imap.IMAPMessage.getProtocol(IMAPMessage.java:105) at com.sun.mail.imap.IMAPMessage.loadEnvelope(IMAPMessage.java:941) at com.sun.mail.imap.IMAPMessage.getSubject(IMAPMessage.java:238) at com.softlinx.docurouter.source.email.EmailSourceConnector.processMess ages(EmailSourceConnector.java:1213) at com.softlinx.docurouter.source.email.EmailSourceConnector.process(Ema ilSourceConnector.java:1455) at com.softlinx.docurouter.source.email.EmailSourceConnector.main(EmailS ourceConnector.java:1622) My configuration is pretty simple. I saw somewhere that I could put a timeoutidle on the connector but that does not seem to help. Any ideas are appreciated. Here is the config. # Stunnel configuration file for Office 365 SMTP and POP3 # Author: MessageOps, www.messageops.com<http://www.messageops.com> # GLOBAL OPTIONS client = yes output = /etc/stunnel/stunnel-log.txt debug=3 # taskbar=yes # SERVICE-LEVEL OPTIONS [POP3 Incoming] accept = 110 connect = outlook.office365.com:995 timeoutidle = 14400 [SMTP Outgoing] protocol = smtp accept = 25 connect = outlook.office365.com:587 [IMAP] accept = 143 connect = outlook.office365.com:993 timeoutidle = 14400 Here is a printout of the global options. Global options: debug = daemon.notice pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options: ciphers = FIPS (with "fips = yes") ciphers = ALL:!SSLv2:!aNULL:!EXP:!LOW:-MEDIUM:RC4:+HIGH (with "fips = no") curve = prime256v1 sessionCacheSize = 1000 sessionCacheTimeout = 300 seconds sslVersion = TLSv1 (with "fips = yes") sslVersion = TLSv1 for client, all for server (with "fips = no") stack = 65536 bytes TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none -Ben

1 0

logging real client IP in Apache
by Stoyan Stoyanov 07 Jul '17

07 Jul '17

I have an Apache server serving only HTTP requests on port 80 and an stunnel daemon on the same server listening on port 443 and tunneling HTTPS requests to Apache. Is there a way for the client IP to be passed on to Apache so that I can capture and log that instead of the IP of stunnel, which in this case is 127.0.0.1? Ability to add a variable to the HTTP header would be perfect, but any other suggestions to solve this problem are welcome. Thanks! Stoyan

2 2

Error on startup of Stunnel
by Shelstone Lorde 30 Jun '17

30 Jun '17

I installed version 5.41, the latest version, on a Windows 10 Pro machine. I placed a link to the Stunnel.exe file in the Startup folder. I am getting the error "The ordinal 3253 could not be located in the dynamic link library c:\Users\...Programs\Startup\stunnel.exe". May be there has been a previous posting concerning this error but I have not been able to find it. Any help or suggestion will be appreciated. Thanks.

1 0

Re: [stunnel-users] Stunnel Connectivity Issue
by Ludolf Holzheid 13 Jun '17

13 Jun '17

On Tue, 2017-06-13 22:51:27 +0530, Dheeraj Gautam wrote: > Hi Browne, > > > > I am not understand like what config I have to do in stunnel config file. > > > > As per application it will trigger 8228 port of remote server, but at the momen stunnel is working only when I am trying to telnet localhost on 9233 port. > Dheeraj, I'm afraid you confused the directions: In you configuration file, you told Stunnel to accept connections on localhost, port 9233 ("accept = 127.0.0.1:9233"). Then, you told Stunnel, if such a connection is accepted, to connect to a remote server at port 8228 ("connect = 69.191.198.34:8228"). As long as both connections are established, Stunnel will forward data from localhost to 69.191.198.34 and vice versa, while encrypting the data in the localhost -> 69.191.198.34 direction and decrypting the data in the opposite direction (69.191.198.34 -> localhost). With this setup, a client program (such as Thunderbird) sends and receives plain-text data to/from a Stunnel instance on the same machine, while a server program on a remote machine (such as the Google mail server) sends and receives encrypted data to/from Stunnel. Is this about the setup you have in mind? Is your application server or client? Does it send and receive plain-text data or encrypted data? Ludolf -- Ludolf Holzheid Bihl+Wiedemann GmbH Floßwörthstraße 41 68199 Mannheim, Germany Tel: +49 621 33996-0 Fax: +49 621 3392239 mailto:lholzheid@bihl-wiedemann.de http://www.bihl-wiedemann.de Sitz der Gesellschaft: Mannheim Geschäftsführer: Jochen Bihl, Bernhard Wiedemann Amtsgericht Mannheim, HRB 5796

1 0

Configuring stunnel and openssl on Windows to support TLS 1.2
by Liz Turi 13 Jun '17

13 Jun '17

Good morning, I'm hoping you can help point me in the right direction. The problem I'm trying to solve is enabling TLS 1.2 connections on a Windows (environment has both Windows 2008 and Windows 10 environments) platform. Currently, my private keys are managed by the Windows certificate store, using the capi engineId within stunnel (v 5.41), which uses OpenSSL 1.0.1. Because of this, stunnel can only negotiate a TLS 1.1 connection. I've tried compiling OpenSSL 1.1.0f and stunnel 5.41, but no luck either cross compiling under CentOS, nor under Windows using either MSYS2/MINGW32 or Cygwin. What I'm looking for is any one of the following 1) solid current cross-compiling examples or references 2) solid current Windows compiling examples or references using extant versions 3) a way to manage the pfx/p12 (private key) in stunnel without resorting to the Windows certificate store. Option 3 is preferred. I see how to manage pkcs11, but not pkcs12. Thank you in advance! Liz Turi Sr. Consultant Massachusetts eHealth Collaborative 860 Winter Street, Waltham, MA 02451 (m) 339-222-6614 (o) 781-907-7204 (f) 781-207-8589 www.maehc.org<http://www.maehc.org> [fb_icon]<https://www.facebook.com/massachusettsehealthcollab?fref=nf>[li_icon]<https://www.linkedin.com/company/massachusetts-ehealth-collaborative?trk=ty…>[tw_icon]<https://twitter.com/MAeHC_org> CONFIDENTIALITY NOTICE The information contained in this email transmission is legally privileged and confidential information intended only for the use of the addressee named above. If the reader of this message is not the intended recipient you are hereby notified that any dissemination, distribution or copying of this email transmission is strictly prohibited. If you have received this email transmission in error, please notify us immediately. Thank you.

1 1

Memleak sTunnel Win32 5.41 ?
by Dod 12 Jun '17

12 Jun '17

Hello, I just noticed that stunnel memory usage is growing slowly but surely using 5.41 on Win7 64 Bits. Using a few POP3 SSL tunnels. Now it is using 290MB memory I don't know if it is since 5.41 (didn't pay attention). Is there a way to trace/log something that could be useful ? (apart from the process memory usage curve that I guess will not help). regards.

1 0

TLS-SRP patch
by Kevin Sheldrake 06 Jun '17

06 Jun '17

Hello I recently produced a patch that permits use of TLS-SRP; it is based on the TLS-PSK code and this blog post: https://matthewarcus.wordpress.com/2014/05/10/srp-in-openssl/ It’s not the cleanest of code but it does work as a POC. The patch is available here: https://github.com/rtfcode/tls-srp The README.txt provides some info on testing the patch and how it might be used to help dev web browsers and servers that support TLS-SRP (for IoT work). There is a page on the forthcoming OWASP Summit ‘TLS for Local IoT’ workshop (for which it was developed) at: https://owaspsummit.org/Working-Sessions/IoT/TLS-for-Local-IoT.html In terms of using TLS-SRP support in stunnel as a proxy, it might be useful as a replacement for TLS-PSK where the credentials are user-memorable (pass phrase, for example) as TLS-SRP has lower entropy requirements than TLS-PSK. For example, the creds could be stored in the user’s head rather than in a file and be less open to compromise if a device was seized. I don’t know if that’s useful for anyone; it’s just a thought. Thanks Kev

1 0

Connect to sub-directory path
by Shamim Uz Zaman 25 May '17

25 May '17

Hi Looking for an example to connect to subdirectory path such that [connect] client = yes accept = 127.0.0.1:441 connect = xxx.website.com:443/Connect/topath verifyChain = yes verifyPeer=yes CAfile = ca-certs.pem checkHost = xxx.mywebsite.com OCSPaia = yes When I only use xxx.mywebsite.com:443 it works. However, below three url gives TCP error (Unknown TCP service) xxx.mywebsite.com:443/Connect/topath xxx.mywebsite.com/Connect/topath https://xxx.mywebsite.com/Connect/topath My proxy connection requires to translate to the directory path of the domain. Regards, *Shamim Zaman*

2 1

Stunnel Connectivity Issue
by Dheeraj Gautam 24 May '17

24 May '17

Hi Team, We are using 5.41 release of Stunnel software to establish TCP connection with remote server using by TLSV1.2 protocol. Enclosed configuration file wherein we are trying to establish TCP connection with one my server along with provided certificate and key which are pointed in config file. Could you please let us know what parameters we are missing here due to which connection is not establishing with remote server. Although, stunnel logs indicating that configuration successful, but in logs no where is mentioned about the connection is it connected or not, below is the artifact for your easy ref. Could you please help us here to resolve this issue. Regards, Dheeraj Gautam -- www.arborfs.com This e-mail and any attachment are confidential and contain proprietary information, some or all of which may be legally privileged. It is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient, please notify the author immediately by telephone or by replying to this e-mail, and then delete all copies of the e-mail on your system. If you are not the intended recipient, you must not use, disclose, distribute, copy, print or rely on this e-mail. Whilst we have taken reasonable precautions to ensure that this e-mail and any attachment has been checked for viruses, we cannot guarantee that they are virus free and we cannot accept liability for any damage sustained as a result of software viruses. We would advise that you carry out your own virus checks, especially before opening an attachment.

1 0

Stunnel on Suse 8.1, connections refused, pid remains
by InvalidPath 09 May '17

09 May '17

So I have this server, I can start stunnel via /etc/rc.d/stunnel start. The pid is there as witnessed by ps -aux | grep stunnel, I have 4 customers that access this server. The customers pull data files that contain certain client records. Anyway my test user connects to the server and is able to pull a handful of files before their process begins timing out. When this happens I can no longer SSH to the host without restarting stunnel. Weird thing is, is that I can see the pid still running when this happens. I have the debug = 7 but the log files according to stunnel - version is set to a level of 5. No clue where it''s getting a 5 from. But I am unable to determine why or what is causing this. And it's starting to cost the company lost revenue. Any help would be greatly appreciated. Ben

1 0

Graceful config reload when -fd option was used
by z a 09 May '17

09 May '17

Hi, Since version 4.30, sending a HUP signal to a running stunnel process will cause it to gracefully reload with the given config file. Is there a way to accomplish this when the running stunnel process was started with the "-fd" flag as in the example below? cat foo.conf | stunnel-fd 0 I tried writing to /proc/$pid/fd/0 but that didn't work. I'm hoping someone here has overcome this issue and might be able to whisper a hint in my direction. I am on Centos 7.2. Thanks

1 0

Trouble with stunnel.conf (version 5.41)
by Mark Garciano 02 May '17

02 May '17

Hi Stunnel users, Any ideas why I get a "server down" message"? Below is the conf file: ;--------------------------------------------------------------------------- ; ************************************************************************** ; * Global options * ; ************************************************************************** ; ; Debugging stuff (may useful for troubleshooting) debug = 7 output = stunnel.log ;Disable FIPS mode to allow non-approved protocols and algorithms fips = no ;************************************************************************** ; * Service defaults may also be specified in individual service sections * ; ************************************************************************** ; Disable support for insecure SSLv2 protocol options = NO_SSLv2 key = stunnel.pem cert = stunnel.pem client = yes accept = 5001 connect = XXXXXXXXXXX.com:6443 TIMEOUTclose = 0 TIMEOUTconnect = 200 TIMEOUTidle = 86400 ;--------------------------------------------------------------------------- HERE IS THE LOG WINDOW MESSAGE: [!] Server is down [ ] Running on Windows 6.1 [.] Reading configuration from file stunnel.conf [.] UTF-8 byte order mark detected [.] FIPS mode disabled [ ] Compression disabled [ ] Snagged 64 random bytes from C:/.rnd [ ] Wrote 1024 new random bytes to C:/.rnd [ ] PRNG seeded successfully [ ] Initializing inetd mode configuration [!] Service [(null)]: 'accept' option is only allowed in a [section] Mark Garciano Systems Programmer II USC Libraries Integrated Library Systems 213-740-3568

2 1

Re: [stunnel-users] Help in setting stunnel in client mode to connect webservice in mutual authentication
by Chokkalingam, Jothish 28 Apr '17

28 Apr '17

Hi Can you help in sorting it out below scenario We have a URL whose TLS is 1.0 and now it is being upgraded to 1.2. Since the current application doesn't support V1.0 I am planning to use stunnel in between to fix the gap. Can you help if my below config is correct or not. The communication between client and server is MASSL(mutual authentication SSL) [Billpay46200] client = yes CApath = /apps/bss/CCBTrustStore-->trust store where the remote webservice certificates are stored in cert format accept = 46200-->port configured from client machine to connect using http connect = xxx.in.xxx.com.au:46200-->port where the incoming http request need to be changed from http to https cert = /stunnel/bin/client.pem-->identity certificate used for client key = /stunnel/bin/key.pem-->corresponding key for the above identity certificate. While hitting using the URL http://localhost:46200 it is shown in stunnel log as below 2017.04.28 17:17:51 LOG5[2627:3]: Billpay46200 accepted connection from 127.0.0.1:58382 2017.04.28 17:17:51 LOG5[2627:3]: Billpay46200 connected remote server from 10.116.194.24:58383 2017.04.28 17:17:51 LOG3[2627:3]: SSL_connect: Peer suddenly disconnected 2017.04.28 17:17:51 LOG5[2627:3]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket Thanks and Regards, Jothish TIBCO TSD Ph. : +91 44 39263958 Mobile : +91 9884040171 Support : +91 9962007110 OC : jothish.chokkalingam Group mail:- Telstra.psm.tsd.tibco(a)accenture.com ________________________________ This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. ______________________________________________________________________________________ www.accenture.com

1 0

Remove session callback
by Florian Gossin 19 Apr '17

19 Apr '17

Hi, I have updated to the latest 5.41 version. I was troubleshooting another problem and I discovered dozens of lines in the log file with "Remove session callback, Deallocating application specific data for session connect address": 2017.04.19 14:49:49 LOG7[17483]: Service [pgbouncer-client] started 2017.04.19 14:49:49 LOG7[17483]: Option TCP_NODELAY set on local socket 2017.04.19 14:49:49 LOG5[17483]: Service [pgbouncer-client] accepted connection from x.x.x.x:36018 2017.04.19 14:49:49 LOG6[17483]: Peer certificate required 2017.04.19 14:49:49 LOG7[17483]: TLS state (accept): before/accept initialization 2017.04.19 14:49:49 LOG7[17483]: SNI: no virtual services defined 2017.04.19 14:49:49 LOG7[17483]: TLS state (accept): SSLv3 read client hello A 2017.04.19 14:49:49 LOG7[17483]: TLS state (accept): SSLv3 write server hello A 2017.04.19 14:49:49 LOG7[17483]: TLS state (accept): SSLv3 write change cipher spec A 2017.04.19 14:49:49 LOG7[17483]: TLS state (accept): SSLv3 write finished A 2017.04.19 14:49:49 LOG7[17483]: TLS state (accept): SSLv3 flush data 2017.04.19 14:49:49 LOG7[17483]: TLS state (accept): SSLv3 read finished A 2017.04.19 14:49:49 LOG7[17483]: Remove session callback 2017.04.19 14:49:49 LOG7[17483]: Deallocating application specific data for session connect address 2017.04.19 14:49:49 LOG7[17483]: Remove session callback 2017.04.19 14:49:49 LOG7[17483]: Deallocating application specific data for session connect address ... Can anyone explain me what it is about ? Thank you, Florian

1 0

Windows Server 2012 stunnel service
by Adam Shackleton 18 Apr '17

18 Apr '17

Hi All I'm running stunnel on Windows Server 2012 R2 with the following config: [test-qa] client = yes accept = 127.0.0.1:8080 connect = webaddress.com:443 cert = API-q-response.pfx CAfile = ca-certs.pem OCSPaia = yes When I start the GUI I'm prompted for the certificate password then and then stunnel works fine, but I need it to run as a service. I've tried using the start menu stunnel Service Install button, I've also tried opening a command prompt in C:\Program Files (x86)\stunnel\config and running C:\Program Files (x86)\stunnel\bin\stunnel.exe -install, and I've also tried moving the config file and certs to the \bin directory and running stunnel -install there as well. In all case the service installs ok, and when you run it, it starts (I can see it in the services tool), you can click the stunnel Configuration File Reload button in the start menu and it says the configuration was successfully reloaded, but it doesn't work when I try to use it. I've noticed two things that might be relevant: 1. At no point does it prompt me for the certificate password like it does when I load the GUI 2. The dialog boxes that open when the service is installed or started say "stunnel 5.40 on Win32 (not configured) [cid:image001.png@01D2B81E.BD3E6BC0] If anyone has any advice that would be greatly appreciated. Thanks Adam

2 1

SOCKS connection to the IPv4 loopback rejected.
by Robert de Bath 15 Apr '17

15 Apr '17

Hi everyone, How do I get rid of this message? I have a stunnel server setup on a remote machine using the socks protocol. I use two keys plus the certificates and a private CA to protect the SSL link. On a local machine I have an stunnel client running without a protocol option set. If I try to make a socks connection to an interface IP of the remote server it works perfectly, bypassing the intervening firewalls through the protected tunnel. But the interface IP changes and I only want to allow connections to the remote server through the tunnel. I could setup traditional tunnels, but while one of the services (remote desktop to the Windows server) is constant the others are dynamically configurable. I have even considered using SNI to distinguish the incoming connections to the various services but while this allows there to be just one tunnel port it will still need a remote reconfiguration of stunnel every time a service port is added or removed. The best way to express this limit is that the socks server should ONLY connect to localhost; but it's "rejected". In actual operation I will probably need to allow the local network too which will probably be an rfc1597 address. Looking at the source it appears that this condition is hard coded into the "validate" function so my question becomes: can you please remove this or add a flag to turn it off? -- Robert de Bath robert(a)tvisiontech.co.uk

1 0

Configure Error
by Kenway Ng 12 Apr '17

12 Apr '17

Hi I am running into an issue when I go into the src directory and I run the configure command, I get configure: error: Could not find your TLS library installation dir Use --with-ssl option to fix this problem I am trying to upgrade our version of stunnel. Our SME left and now I am trying to upgrade stunnel to fix a vulnerability . I am being told to use TLS1.1 or higher Here is our current version of stunnel $ ./stunnel -version stunnel 4.15 on x86_64-redhat-linux-gnu with OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP Any help would be appreciated. Kenway

1 0

PSK, verifying the client
by Mike 05 Apr '17

05 Apr '17

Is it possible to verify the client using PSK? On the stunnel server I specify a PSKsecrets file with two lines in it, one for client01 and one for client02. The secret is about 36 characters long. On a client, I have a similar PSKsecrets file, but only containing the client01 line. Now, if I try to connect with, say, a client03, i.e., any client that does not have a matching line in the server's PSKsecrets file, how can I assure that the client connection will be rejected? What I'd like to see would be the following: any client that tries to connect, and does not present a PSK that is present in the server's PSKsecrets file, then that client's connection request is rejected, with an appropriate message logged. Can I do that with the current stunnel? thx.

1 0

Scan to email failure: RapbianPi3 to Office365
by Graeme Ellisson 03 Apr '17

03 Apr '17

Hi. I recently bought a Pi3 and have loaded Raspbian with Doobs (Previously I had this running faultlessly under a Windows Server for my Canon multi function printer that does not support SSL/TLS but only authentication). After about 8 attempts to get Stunnel4 working (there doesn't seem to be a later version to install via the command line) I eventually found that Stunnel4 works fine as long as one doesn't update Dabian from the initial Doobs install. So, I now have the service running and listening on port 25 with the following config file: debug=7 output=/etc/stunnel/stunnel.log client=yes options=NO_SSLv2 (I added this last night after reading a blog) [SMTP OUT] sslVersion=TLSv1 (I added this last night after reading a blog) protocol=smtp accept=25 connect=smtp.office365.com:587 On restarting the service I see the following which looks okay to my untrained eye: 2017.04.03 09:42:09 LOG7[3570]: Dispatching signals from the signal pipe 2017.04.03 09:42:09 LOG7[3570]: Processing SIGNAL_TERMINATE 2017.04.03 09:42:09 LOG5[3570]: Terminated 2017.04.03 09:42:09 LOG7[3570]: Closing service [SMTP OUT] 2017.04.03 09:42:09 LOG7[3570]: Service [SMTP OUT] closed (FD=7) 2017.04.03 09:42:09 LOG7[3570]: Service [SMTP OUT] closed 2017.04.03 09:42:09 LOG7[3570]: removing pid file /var/run/stunnel4.pid 2017.04.03 09:42:09 LOG7[3926]: Clients allowed=500 2017.04.03 09:42:09 LOG5[3926]: stunnel 5.06 on arm-unknown-linux-gnueabihf platform 2017.04.03 09:42:09 LOG5[3926]: Compiled with OpenSSL 1.0.1k 8 Jan 2015 2017.04.03 09:42:09 LOG5[3926]: Running with OpenSSL 1.0.1t 3 May 2016 2017.04.03 09:42:09 LOG5[3926]: Update OpenSSL shared libraries or rebuild stunnel 2017.04.03 09:42:09 LOG5[3926]: Threading:PTHREAD Sockets:POLL,IPv6,SYSTEMD SSL:ENGINE,OCSP,FIPS Auth:LIB$ 2017.04.03 09:42:09 LOG7[3926]: errno: (*__errno_location ()) 2017.04.03 09:42:09 LOG5[3926]: Reading configuration from file /etc/stunnel/stunnel4.conf 2017.04.03 09:42:09 LOG5[3926]: FIPS mode disabled 2017.04.03 09:42:09 LOG7[3926]: Compression disabled 2017.04.03 09:42:09 LOG7[3926]: Snagged 64 random bytes from /dev/urandom 2017.04.03 09:42:09 LOG7[3926]: PRNG seeded successfully 2017.04.03 09:42:09 LOG6[3926]: Initializing service [SMTP OUT] 2017.04.03 09:42:09 LOG7[3926]: No private key specified 2017.04.03 09:42:09 LOG7[3926]: SSL options: 0x03000004 (+0x03000000, -0x00000000) 2017.04.03 09:42:09 LOG5[3926]: Configuration successful 2017.04.03 09:42:09 LOG7[3926]: Listening file descriptor created (FD=7) 2017.04.03 09:42:09 LOG7[3926]: Service [SMTP OUT] (FD=7) bound to 0.0.0.0:25 2017.04.03 09:42:09 LOG7[3927]: Created pid file /var/run/stunnel4.pid When sending a scan from the printer to an email address I see the following in the log file: 2017.04.03 10:00:05 LOG7[3927]: Service [SMTP OUT] accepted (FD=3) from 192.168.8.99:1085 2017.04.03 10:00:05 LOG7[3960]: Service [SMTP OUT] started 2017.04.03 10:00:05 LOG5[3960]: Service [SMTP OUT] accepted connection from 192.168.8.99:1085 2017.04.03 10:00:05 LOG6[3960]: s_connect: connecting 40.101.73.162:587 2017.04.03 10:00:05 LOG7[3960]: s_connect: s_poll_wait 40.101.73.162:587: waiting 10 seconds 2017.04.03 10:00:05 LOG5[3960]: s_connect: connected 40.101.73.162:587 2017.04.03 10:00:05 LOG5[3960]: Service [SMTP OUT] connected remote server from 192.168.8.33:59792 2017.04.03 10:00:05 LOG7[3960]: Remote socket (FD=9) initialized 2017.04.03 10:00:05 LOG7[3960]: <- 220 DB6PR07CA0179.outlook.office365.com Microsoft ESMTP MAIL Service $ 2017.04.03 10:00:05 LOG7[3960]: -> 220 DB6PR07CA0179.outlook.office365.com Microsoft ESMTP MAIL Service $ 2017.04.03 10:00:05 LOG7[3960]: -> EHLO localhost 2017.04.03 10:00:05 LOG7[3960]: <- 250-DB6PR07CA0179.outlook.office365.com Hello [46.208.253.189] 2017.04.03 10:00:05 LOG7[3960]: <- 250-SIZE 157286400 2017.04.03 10:00:05 LOG7[3960]: <- 250-PIPELINING 2017.04.03 10:00:05 LOG7[3960]: <- 250-DSN 2017.04.03 10:00:05 LOG7[3960]: <- 250-ENHANCEDSTATUSCODES 2017.04.03 10:00:05 LOG7[3960]: <- 250-STARTTLS 2017.04.03 10:00:05 LOG7[3960]: <- 250-8BITMIME 2017.04.03 10:00:05 LOG7[3960]: <- 250-BINARYMIME 2017.04.03 10:00:05 LOG7[3960]: <- 250-CHUNKING 2017.04.03 10:00:05 LOG7[3960]: <- 250 SMTPUTF8 2017.04.03 10:00:05 LOG7[3960]: -> STARTTLS 2017.04.03 10:00:05 LOG7[3960]: <- 220 2.0.0 SMTP server ready 2017.04.03 10:00:05 LOG6[3960]: SNI: sending servername: outlook.office365.com 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): before/connect initialization 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): unknown state 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): unknown state 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): unknown state 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): unknown state 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): unknown state 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): unknown state 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): unknown state 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): unknown state 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): unknown state 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): unknown state 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): unknown state 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): unknown state 2017.04.03 10:00:05 LOG7[3960]: SSL state (connect): unknown state 2017.04.03 10:00:05 LOG7[3960]: 0 items in the session cache 2017.04.03 10:00:05 LOG7[3960]: 2 client connects (SSL_connect()) 2017.04.03 10:00:05 LOG7[3960]: 2 client connects that finished 2017.04.03 10:00:05 LOG7[3960]: 0 client renegotiations requested 2017.04.03 10:00:05 LOG7[3960]: 0 server connects (SSL_accept()) 2017.04.03 10:00:05 LOG7[3960]: 0 server connects that finished 2017.04.03 10:00:05 LOG7[3960]: 0 server renegotiations requested 2017.04.03 10:00:05 LOG7[3960]: 0 session cache hits 2017.04.03 10:00:05 LOG7[3960]: 0 external session cache hits 2017.04.03 10:00:05 LOG7[3960]: 0 session cache misses 2017.04.03 10:00:05 LOG7[3960]: 0 session cache timeouts 2017.04.03 10:00:05 LOG6[3960]: SSL connected: new session negotiated 2017.04.03 10:00:05 LOG6[3960]: Negotiated TLSv1 ciphersuite ECDHE-RSA-AES128-SHA (128-bit encryption) 2017.04.03 10:00:05 LOG6[3960]: Compression: null, expansion: null 2017.04.03 10:00:10 LOG6[3960]: SSL socket closed (SSL_read) 2017.04.03 10:00:10 LOG7[3960]: Sent socket write shutdown 2017.04.03 10:00:10 LOG5[3960]: Connection closed: 23 byte(s) sent to SSL, 79 byte(s) sent to socket 2017.04.03 10:00:10 LOG7[3960]: Remote socket (FD=9) closed 2017.04.03 10:00:10 LOG7[3960]: Local socket (FD=3) closed 2017.04.03 10:00:10 LOG7[3960]: Service [SMTP OUT] finished (0 left) 2017.04.03 10:00:20 LOG7[3927]: Service [SMTP OUT] accepted (FD=3) from 192.168.8.99:1086 2017.04.03 10:00:20 LOG7[3961]: Service [SMTP OUT] started 2017.04.03 10:00:20 LOG5[3961]: Service [SMTP OUT] accepted connection from 192.168.8.99:1086 2017.04.03 10:00:20 LOG6[3961]: s_connect: connecting 40.101.72.194:587 2017.04.03 10:00:20 LOG7[3961]: s_connect: s_poll_wait 40.101.72.194:587: waiting 10 seconds 2017.04.03 10:00:20 LOG5[3961]: s_connect: connected 40.101.72.194:587 2017.04.03 10:00:20 LOG5[3961]: Service [SMTP OUT] connected remote serve from 192.168.8.33:57422 2017.04.03 10:00:20 LOG7[3961]: Remote socket (FD=9) initialized 2017.04.03 10:00:21 LOG7[3961]: <- 220 DB6PR07CA0014.outlook.office365.com Microsoft ESMTP MAIL Service $ 2017.04.03 10:00:21 LOG7[3961]: -> 220 DB6PR07CA0014.outlook.office365.com Microsoft ESMTP MAIL Service $ 2017.04.03 10:00:21 LOG7[3961]: -> EHLO localhost 2017.04.03 10:00:21 LOG7[3961]: <- 250-DB6PR07CA0014.outlook.office365.com Hello [46.208.253.189] 2017.04.03 10:00:21 LOG7[3961]: <- 250-SIZE 157286400 2017.04.03 10:00:21 LOG7[3961]: <- 250-PIPELINING 2017.04.03 10:00:21 LOG7[3961]: <- 250-DSN 2017.04.03 10:00:21 LOG7[3961]: <- 250-ENHANCEDSTATUSCODES 2017.04.03 10:00:21 LOG7[3961]: <- 250-STARTTLS 2017.04.03 10:00:21 LOG7[3961]: <- 250-8BITMIME 2017.04.03 10:00:21 LOG7[3961]: <- 250-BINARYMIME 2017.04.03 10:00:21 LOG7[3961]: <- 250-CHUNKING 2017.04.03 10:00:21 LOG7[3961]: <- 250 SMTPUTF8 2017.04.03 10:00:21 LOG7[3961]: -> STARTTLS 2017.04.03 10:00:21 LOG7[3961]: <- 220 2.0.0 SMTP server ready 2017.04.03 10:00:21 LOG6[3961]: SNI: sending servername: outlook.office365.com 2017.04.03 10:00:21 LOG7[3961]: SSL state (connect): before/connect initialization 2017.04.03 10:00:21 LOG7[3961]: SSL state (connect): unknown state 2017.04.03 10:00:21 LOG7[3961]: SSL state (connect): unknown state 2017.04.03 10:00:21 LOG7[3961]: SSL state (connect): unknown state 2017.04.03 10:00:21 LOG7[3961]: SSL state (connect): unknown state 2017.04.03 10:00:21 LOG7[3961]: SSL state (connect): unknown state 2017.04.03 10:00:21 LOG7[3961]: SSL state (connect): unknown state 2017.04.03 10:00:21 LOG7[3961]: SSL state (connect): unknown state 2017.04.03 10:00:21 LOG7[3961]: SSL state (connect): unknown state 2017.04.03 10:00:21 LOG7[3961]: SSL state (connect): unknown state 2017.04.03 10:00:21 LOG7[3961]: SSL state (connect): unknown state 2017.04.03 10:00:21 LOG7[3961]: SSL state (connect): unknown state 2017.04.03 10:00:21 LOG7[3961]: SSL state (connect): unknown state 2017.04.03 10:00:21 LOG7[3961]: 0 items in the session cache 2017.04.03 10:00:21 LOG7[3961]: 3 client connects (SSL_connect()) 2017.04.03 10:00:21 LOG7[3961]: 3 client connects that finished 2017.04.03 10:00:21 LOG7[3961]: 0 client renegotiations requested 2017.04.03 10:00:21 LOG7[3961]: 0 server connects (SSL_accept()) 2017.04.03 10:00:21 LOG7[3961]: 0 server connects that finished 2017.04.03 10:00:21 LOG7[3961]: 0 server renegotiations requested 2017.04.03 10:00:21 LOG7[3961]: 0 session cache hits 2017.04.03 10:00:21 LOG7[3961]: 0 external session cache hits 2017.04.03 10:00:21 LOG7[3961]: 0 session cache misses 2017.04.03 10:00:21 LOG7[3961]: 0 session cache timeouts 2017.04.03 10:00:21 LOG6[3961]: SSL connected: new session negotiated 2017.04.03 10:00:21 LOG6[3961]: Negotiated TLSv1 ciphersuite ECDHE-RSA-AES128-SHA (128-bit encryption) 2017.04.03 10:00:21 LOG6[3961]: Compression: null, expansion: null 2017.04.03 10:00:26 LOG6[3961]: SSL socket closed (SSL_read) 2017.04.03 10:00:26 LOG7[3961]: Sent socket write shutdown 2017.04.03 10:00:26 LOG5[3961]: Connection closed: 23 byte(s) sent to SSL, 79 byte(s) sent to socket 2017.04.03 10:00:26 LOG7[3961]: Remote socket (FD=9) closed 2017.04.03 10:00:26 LOG7[3961]: Local socket (FD=3) closed 2017.04.03 10:00:26 LOG7[3961]: Service [SMTP OUT] finished (0 left) At the end of this, no email is received. I can't tell from the above if the document is not being received by Stunnel from the printer or if Stunnel can not pass the document to Office365. It looks like TLSv1 is being negotiated and some data is being sent but then it closes the connection. Any help would be much appreciated. Regards, Graeme

2 1

Stunnel Version Vulnerability-Currently using 5.04
by Tracy Drake - IQGC-C 28 Mar '17

28 Mar '17

Hello Stunnel Users Forum! I wonder if anyone may have suggestions of what, if anything can be done to surmount a reported vulnerability for Stunnel versions prior to 5.34. I have limited savvy in this arena so please excuse this "Stunnel for Dummies" question. The following statements surfaced in a "security vulnerabilities" report... The version of stunnel installed on the remote host is 4.46 or later but prior to 5.34. It is, therefore, affected by a security bypass vulnerability related to the validation of level 4 peer certificates. An unauthenticated, remote attacker can exploit this to have an impact on confidentiality, integrity, and/or availability. No other details are available. I am of the mind that perhaps an entry in Stunnel.conf until we can deploy an upgrade? Thanks in advance for any feedback! Upgrade to stunnel version 5.34 or later. -- Tracy Drake CSM Senior Consultant GSA-FAS CAMEO Contractor URSA & INFOConnect Support & Training Team Lead 704-987-1211 tracy.drake(a)gsa.gov

1 0

Multi source VPN connectivity
by Aykut SAY 24 Mar '17

24 Mar '17

Hi, We are working on a integration project and we need to connect our application to three different sources. These three sources have their own VPN. Can stunnel connect to three different vpn from one server? If yes, which version of stunnel we need to install to our server? Thanks, Aykut

1 0

stunnel public private key authentication like ssh
by Michael Power 23 Mar '17

23 Mar '17

Is there a way to configure stunnel just to check the public key of the provided certificate? I want authentication between the server and the client to take place by public key only, no PKI just like ssh. Is this possible? Is this verify level 4, or does that still check the CN against the host that I am connecting to? Michael Power

1 0

update stunnel with engine pkcs11
by Heinsbroek, Peter 20 Mar '17

20 Mar '17

Hallo, I’m a newbee in C programming. I have to upgrade stunnel 5.31 with engine_pkcs11 (0.1.8) for windows to the latest versions. (5.40 & 0.2.2) My engine_pkcs.c contains an subroutine my_get_pin (see attachment line 707) that reads a pin from a file in the windows folder. After reading it ,it transforms the pin to hexadecimal, if not already done, and writes it back in the file. After adjusting the new source it compiles without errors, but when executing it doesn’t work anymore. I also attached the old engine_pkcs11.c as we used it. Can someone help me with this problem. After compairing the old and new source I noticed that there have been major improvements to the source With regards, Peter Heinsbroek Application manager NT / SQL20xx Tel. +31 (0)88 265 9869 Mob. +31 6 5375 3244 Werner von Siemensstraat 3 2712 PN Zoetermeer, Nederland Org. unit PS Central Fin Services Unit 02 SI NL Email peter.heinsbroek(a)atos.net<mailto:peter.heinsbroek@atos.netm> Web www.nl.atos.net<UrlBlockedError.aspx> Atos IT Solutions and Services B.V. Comm. Register The Hague no. 27380688 This e-mail is intended exclusively for the addressee(s), and may not be forwarded or made available for use to any person other than the addressee(s). If you are not the intended recipient, please notify the sender thereof and destroy/delete the message. The sender disclaims any liability as regards (the content of) this e-mail. This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, Atos’ liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. On all offers and agreements under which Atos Nederland B.V. supplies goods and/or services of whatever nature, the Terms of Delivery from Atos Nederland B.V. exclusively apply. The Terms of Delivery shall be promptly submitted to you on your request.

1 0

Fwd: Stunnel Performance strangeness
by Scott McKeown 10 Mar '17

10 Mar '17

Hi All, We have been doing some throughput testing and are wondering of you can help explain some of the results we have been getting. We are trying to establish the maximum number of handshakes per second our appliances can do when using Stunnel. Our tests have been done on a 4 core Intel(R) Xeon(R) CPU E3-1230 v5 @ 3.40GHz machine with 8Gb ram. Using stunnel 5.33 openssl 1.0.2j (We use stunnel 5.33 here, but this was also tested with stunnel 5.40 and we got the same issue) Stunnel was compiled with - ./configure --enable-fips --enable-ipv6 --with-threads=pthread --sysconfdir=/etc --with-ssl=/usr/src/built/OpenSSL_1_0_2j-no_march/usr/local/ --disable-libwrap --disable-systemd I was using a python script of my own design for load testing when I noticed the problem we then switched to an open source package called vegeta https://github.com/tsenart/vegeta the command I was using to run it was - echo "GET https://10.10.10.10:443" | ./vegeta attack -workers=30 -rate=3000 -duration=300s -insecure > test.out We are essentially seeing a degradation in throughput at a fixed point in time. I am seeing the problem when using 3000 transactions per second. We are doing https gets through stunnel to a http backend, 1 transaction is an ssl handshake the http get and waiting for the response. Interestingly if I try 5.06 it works fine I get a smooth constant loading. Please take a look at 30worker3000rate5.33-300s.png where you can see after about 55 seconds there is a jump in latency. I get the same issue if I run the test with 2000 transactions. Please see 30worker20005.33-700s.png but with the lower transaction rate the issue takes longer to rear its head. The issue doesnt happen if I run the test with 3000 transaction using 5.06. Please see 30worker3000rate5.06-300s.png >From looking at the graphs our thoughts were that we were hitting some sort of cache limit and used that as a starting point. We have taken a look at the code changes between versions we know were working and the problematic version and the main thing that stands out is the changes to the leak detection. Previously this was partially based on the number of clients but has been changed to use the sections. This led to the decision to try a different limit value and found the number of connections we saw before seeing an issue corresponds to the change of the limit value. We think we have identified the code that is causing the problem/doing something funny it was added in 5.33 NOEXPORT long leak_threshold() { long limit; limit=10000*((int)number_of_sections+1); #ifndef USE_FORK limit+=100*num_clients; #endif return limit; } its src/str.c when increasing the limit number so limit=10000*((int)number_of_sections+1) to limit=20000*((int)number_of_sections+1) This still results in an increase in response time but at a later time in the test, please see 30worker3000rate5.33-ben-highlimit.png Interestingly once I end up in this state I am stuck with high latencies until I restart stunnel. (The box I am testing on was left over night to make sure its not any hanging tcp connections or anything like that) I must admit we are at the limit of our C understanding and your imput would be welcomed. -- With Kind Regards. Scott McKeown Loadbalancer.org http://www.loadbalancer.org Tel (UK) - +44 (0) 3303801064 <0330%20380%201064> (24x7) Tel (US) - +1 888.867.9504 <+1%20888-867-9504> (Toll Free)(24x7)

1 0

Segfault after connecting
by Andrew Culver 23 Feb '17

23 Feb '17

I had my stunnel instance working as expected last week. Since then I've moved the server behind a load balancer, which is doing regular health checks (opens a tcp connection, then disconnects) to see that stunnel is up. I don't believe the health checks are a problem, but they're the only change I've made since I had stunnel working. I can see the health checks connecting and disconnecting. However when I open a new connection, either by telnet or by: openssl s_client -connect mtar.uwo.ca:587 -starttls smtp ... stunnel says it fails to verify the server certificate, then seg faults. I'm running stunnel 5.40 and I'm having the same problem on 2 different servers running openssl 1.1.0d and 1.1.0e. Here's my config: [root@mtar1 stunnel]# egrep -v '^;|^ *$' stunnel.conf ; Sample stunnel configuration file for Unix by Michal Trojnara 2002-2017 setuid = stunnel setgid = stunnel pid = /usr/local/var/run/stunnel/stunnel.pid foreground = yes debug = debug [uwo2local] accept = 587 cert = /usr/local/etc/stunnel/mtar-withprivatekey.pem connect = 20587 protocol = smtp [local2o365] client = yes accept = 127.0.0.1:20587 connect = smtp.office365.com:587 checkHost = smtp.office365.com verifyChain = yes CApath = /etc/ssl/certs OCSPaia = yes protocol = smtp Here's my debug log: The health checks are from 172.18.58.5 and my test connection which leads to the seg fault is from 129.100.6.17. [root@mtar1 stunnel]# /usr/local/bin/stunnel /usr/local/etc/stunnel/stunnel.conf 2017.02.23 11:28:48 LOG7[ui]: Clients allowed=500 2017.02.23 11:28:48 LOG5[ui]: stunnel 5.40 on x86_64-unknown-linux-gnu platform 2017.02.23 11:28:48 LOG5[ui]: Compiled/running with OpenSSL 1.1.0d 26 Jan 2017 2017.02.23 11:28:48 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2017.02.23 11:28:48 LOG7[ui]: errno: (*__errno_location ()) 2017.02.23 11:28:48 LOG5[ui]: Reading configuration from file /usr/local/etc/stunnel/stunnel.conf 2017.02.23 11:28:48 LOG5[ui]: UTF-8 byte order mark detected 2017.02.23 11:28:48 LOG5[ui]: FIPS mode disabled 2017.02.23 11:28:48 LOG7[ui]: Compression disabled 2017.02.23 11:28:48 LOG7[ui]: PRNG seeded successfully 2017.02.23 11:28:48 LOG7[cron]: Cron thread initialized 2017.02.23 11:28:48 LOG6[ui]: Initializing service [uwo2local] 2017.02.23 11:28:48 LOG7[ui]: Ciphers: HIGH:!DH:!aNULL:!SSLv2 2017.02.23 11:28:48 LOG7[ui]: TLS options: 0x02020004 (+0x02000000, -0x00000000) 2017.02.23 11:28:48 LOG6[ui]: Loading certificate from file: /usr/local/etc/stunnel/mtar-withprivatekey.pem 2017.02.23 11:28:48 LOG6[ui]: Certificate loaded from file: /usr/local/etc/stunnel/mtar-withprivatekey.pem 2017.02.23 11:28:48 LOG6[ui]: Loading private key from file: /usr/local/etc/stunnel/mtar-withprivatekey.pem 2017.02.23 11:28:48 LOG6[ui]: Private key loaded from file: /usr/local/etc/stunnel/mtar-withprivatekey.pem 2017.02.23 11:28:48 LOG7[ui]: Private key check succeeded 2017.02.23 11:28:48 LOG7[ui]: DH initialization 2017.02.23 11:28:48 LOG7[ui]: Could not load DH parameters from /usr/local/etc/stunnel/mtar-withprivatekey.pem 2017.02.23 11:28:48 LOG6[ui]: Using dynamic DH parameters 2017.02.23 11:28:48 LOG7[ui]: ECDH initialization 2017.02.23 11:28:48 LOG7[ui]: ECDH initialized with curve prime256v1 2017.02.23 11:28:48 LOG6[ui]: Initializing service [local2o365] 2017.02.23 11:28:48 LOG7[ui]: Ciphers: HIGH:!DH:!aNULL:!SSLv2 2017.02.23 11:28:48 LOG7[ui]: TLS options: 0x02020004 (+0x02000000, -0x00000000) 2017.02.23 11:28:48 LOG7[ui]: No certificate or private key specified 2017.02.23 11:28:48 LOG5[ui]: Configuration successful 2017.02.23 11:28:48 LOG7[ui]: Listening file descriptor created (FD=7) 2017.02.23 11:28:48 LOG7[ui]: Option SO_REUSEADDR set on accept socket 2017.02.23 11:28:48 LOG7[ui]: Service [uwo2local] (FD=7) bound to 0.0.0.0:587 2017.02.23 11:28:48 LOG7[ui]: Listening file descriptor created (FD=8) 2017.02.23 11:28:48 LOG7[ui]: Option SO_REUSEADDR set on accept socket 2017.02.23 11:28:48 LOG7[ui]: Service [local2o365] (FD=8) bound to 127.0.0.1:20587 2017.02.23 11:28:48 LOG6[cron]: Executing cron jobs 2017.02.23 11:28:48 LOG5[cron]: Updating DH parameters 2017.02.23 11:28:48 LOG7[ui]: Created pid file /usr/local/var/run/stunnel/stunnel.pid 2017.02.23 11:28:51 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:28:51 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:28:51 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:28:51 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:28:51 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:40161 2017.02.23 11:28:51 LOG7[0]: Service [uwo2local] started 2017.02.23 11:28:51 LOG7[0]: Option TCP_NODELAY set on local socket 2017.02.23 11:28:51 LOG5[0]: Service [uwo2local] accepted connection from 172.18.58.5:40161 2017.02.23 11:28:51 LOG6[0]: failover: round-robin, starting at entry #0 2017.02.23 11:28:51 LOG6[0]: s_connect: connecting ::1:20587 2017.02.23 11:28:51 LOG7[0]: s_connect: s_poll_wait ::1:20587: waiting 10 seconds 2017.02.23 11:28:51 LOG3[0]: s_connect: connect ::1:20587: Connection refused (111) 2017.02.23 11:28:51 LOG6[0]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:28:51 LOG7[0]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:28:51 LOG5[0]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:28:51 LOG5[0]: Service [uwo2local] connected remote server from 127.0.0.1:33132 2017.02.23 11:28:51 LOG7[0]: Option TCP_NODELAY set on remote socket 2017.02.23 11:28:51 LOG7[0]: Remote descriptor (FD=9) initialized 2017.02.23 11:28:51 LOG7[0]: RFC 2487 not detected 2017.02.23 11:28:51 LOG6[0]: Peer certificate not required 2017.02.23 11:28:51 LOG7[0]: TLS state (accept): before SSL initialization 2017.02.23 11:28:51 LOG3[0]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:28:51 LOG5[0]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:28:51 LOG7[0]: Remote descriptor (FD=9) closed 2017.02.23 11:28:51 LOG7[0]: Local descriptor (FD=3) closed 2017.02.23 11:28:51 LOG7[0]: Service [uwo2local] finished (0 left) 2017.02.23 11:28:51 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:28:51 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:28:51 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:28:51 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:28:51 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33132 2017.02.23 11:28:51 LOG7[1]: Service [local2o365] started 2017.02.23 11:28:51 LOG3[1]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:28:51 LOG5[1]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:28:51 LOG7[1]: Local descriptor (FD=3) closed 2017.02.23 11:28:51 LOG7[1]: Service [local2o365] finished (0 left) 2017.02.23 11:28:56 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:28:56 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:28:56 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:28:56 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:28:56 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:19333 2017.02.23 11:28:56 LOG7[2]: Service [uwo2local] started 2017.02.23 11:28:56 LOG7[2]: Option TCP_NODELAY set on local socket 2017.02.23 11:28:56 LOG5[2]: Service [uwo2local] accepted connection from 172.18.58.5:19333 2017.02.23 11:28:56 LOG6[2]: failover: round-robin, starting at entry #1 2017.02.23 11:28:56 LOG6[2]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:28:56 LOG7[2]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:28:56 LOG5[2]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:28:56 LOG5[2]: Service [uwo2local] connected remote server from 127.0.0.1:33134 2017.02.23 11:28:56 LOG7[2]: Option TCP_NODELAY set on remote socket 2017.02.23 11:28:56 LOG7[2]: Remote descriptor (FD=9) initialized 2017.02.23 11:28:56 LOG7[2]: RFC 2487 not detected 2017.02.23 11:28:56 LOG6[2]: Peer certificate not required 2017.02.23 11:28:56 LOG7[2]: TLS state (accept): before SSL initialization 2017.02.23 11:28:56 LOG3[2]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:28:56 LOG5[2]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:28:56 LOG7[2]: Remote descriptor (FD=9) closed 2017.02.23 11:28:56 LOG7[2]: Local descriptor (FD=3) closed 2017.02.23 11:28:56 LOG7[2]: Service [uwo2local] finished (0 left) 2017.02.23 11:28:56 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:28:56 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:28:56 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:28:56 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:28:56 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33134 2017.02.23 11:28:56 LOG7[3]: Service [local2o365] started 2017.02.23 11:28:56 LOG3[3]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:28:56 LOG5[3]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:28:56 LOG7[3]: Local descriptor (FD=3) closed 2017.02.23 11:28:56 LOG7[3]: Service [local2o365] finished (0 left) 2017.02.23 11:29:01 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:01 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:01 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:29:01 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:29:01 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:46315 2017.02.23 11:29:01 LOG7[4]: Service [uwo2local] started 2017.02.23 11:29:01 LOG7[4]: Option TCP_NODELAY set on local socket 2017.02.23 11:29:01 LOG5[4]: Service [uwo2local] accepted connection from 172.18.58.5:46315 2017.02.23 11:29:01 LOG6[4]: failover: round-robin, starting at entry #0 2017.02.23 11:29:01 LOG6[4]: s_connect: connecting ::1:20587 2017.02.23 11:29:01 LOG7[4]: s_connect: s_poll_wait ::1:20587: waiting 10 seconds 2017.02.23 11:29:01 LOG3[4]: s_connect: connect ::1:20587: Connection refused (111) 2017.02.23 11:29:01 LOG6[4]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:29:01 LOG7[4]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:29:01 LOG5[4]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:29:01 LOG5[4]: Service [uwo2local] connected remote server from 127.0.0.1:33138 2017.02.23 11:29:01 LOG7[4]: Option TCP_NODELAY set on remote socket 2017.02.23 11:29:01 LOG7[4]: Remote descriptor (FD=9) initialized 2017.02.23 11:29:01 LOG7[4]: RFC 2487 not detected 2017.02.23 11:29:01 LOG6[4]: Peer certificate not required 2017.02.23 11:29:01 LOG7[4]: TLS state (accept): before SSL initialization 2017.02.23 11:29:01 LOG3[4]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:29:01 LOG5[4]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:01 LOG7[4]: Remote descriptor (FD=9) closed 2017.02.23 11:29:01 LOG7[4]: Local descriptor (FD=3) closed 2017.02.23 11:29:01 LOG7[4]: Service [uwo2local] finished (0 left) 2017.02.23 11:29:01 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:01 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:01 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:29:01 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:29:01 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33138 2017.02.23 11:29:01 LOG7[5]: Service [local2o365] started 2017.02.23 11:29:01 LOG3[5]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:29:01 LOG5[5]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:01 LOG7[5]: Local descriptor (FD=3) closed 2017.02.23 11:29:01 LOG7[5]: Service [local2o365] finished (0 left) 2017.02.23 11:29:06 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:06 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:06 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:29:06 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:29:06 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:55003 2017.02.23 11:29:06 LOG7[6]: Service [uwo2local] started 2017.02.23 11:29:06 LOG7[6]: Option TCP_NODELAY set on local socket 2017.02.23 11:29:06 LOG5[6]: Service [uwo2local] accepted connection from 172.18.58.5:55003 2017.02.23 11:29:06 LOG6[6]: failover: round-robin, starting at entry #1 2017.02.23 11:29:06 LOG6[6]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:29:06 LOG7[6]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:29:06 LOG5[6]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:29:06 LOG5[6]: Service [uwo2local] connected remote server from 127.0.0.1:33140 2017.02.23 11:29:06 LOG7[6]: Option TCP_NODELAY set on remote socket 2017.02.23 11:29:06 LOG7[6]: Remote descriptor (FD=9) initialized 2017.02.23 11:29:06 LOG7[6]: RFC 2487 not detected 2017.02.23 11:29:06 LOG6[6]: Peer certificate not required 2017.02.23 11:29:06 LOG7[6]: TLS state (accept): before SSL initialization 2017.02.23 11:29:06 LOG3[6]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:29:06 LOG5[6]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:06 LOG7[6]: Remote descriptor (FD=9) closed 2017.02.23 11:29:06 LOG7[6]: Local descriptor (FD=3) closed 2017.02.23 11:29:06 LOG7[6]: Service [uwo2local] finished (0 left) 2017.02.23 11:29:06 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:06 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:06 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:29:06 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:29:06 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33140 2017.02.23 11:29:06 LOG7[7]: Service [local2o365] started 2017.02.23 11:29:06 LOG3[7]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:29:06 LOG5[7]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:06 LOG7[7]: Local descriptor (FD=3) closed 2017.02.23 11:29:06 LOG7[7]: Service [local2o365] finished (0 left) 2017.02.23 11:29:11 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:11 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:11 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:29:11 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:29:11 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:52586 2017.02.23 11:29:11 LOG7[8]: Service [uwo2local] started 2017.02.23 11:29:11 LOG7[8]: Option TCP_NODELAY set on local socket 2017.02.23 11:29:11 LOG5[8]: Service [uwo2local] accepted connection from 172.18.58.5:52586 2017.02.23 11:29:11 LOG6[8]: failover: round-robin, starting at entry #0 2017.02.23 11:29:11 LOG6[8]: s_connect: connecting ::1:20587 2017.02.23 11:29:11 LOG7[8]: s_connect: s_poll_wait ::1:20587: waiting 10 seconds 2017.02.23 11:29:11 LOG3[8]: s_connect: connect ::1:20587: Connection refused (111) 2017.02.23 11:29:11 LOG6[8]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:29:11 LOG7[8]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:29:11 LOG5[8]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:29:11 LOG5[8]: Service [uwo2local] connected remote server from 127.0.0.1:33144 2017.02.23 11:29:11 LOG7[8]: Option TCP_NODELAY set on remote socket 2017.02.23 11:29:11 LOG7[8]: Remote descriptor (FD=9) initialized 2017.02.23 11:29:11 LOG7[8]: RFC 2487 not detected 2017.02.23 11:29:11 LOG6[8]: Peer certificate not required 2017.02.23 11:29:11 LOG7[8]: TLS state (accept): before SSL initialization 2017.02.23 11:29:11 LOG3[8]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:29:11 LOG5[8]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:11 LOG7[8]: Remote descriptor (FD=9) closed 2017.02.23 11:29:11 LOG7[8]: Local descriptor (FD=3) closed 2017.02.23 11:29:11 LOG7[8]: Service [uwo2local] finished (0 left) 2017.02.23 11:29:11 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:11 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:11 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:29:11 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:29:11 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33144 2017.02.23 11:29:11 LOG7[9]: Service [local2o365] started 2017.02.23 11:29:11 LOG3[9]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:29:11 LOG5[9]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:11 LOG7[9]: Local descriptor (FD=3) closed 2017.02.23 11:29:11 LOG7[9]: Service [local2o365] finished (0 left) 2017.02.23 11:29:16 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:16 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:16 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:29:16 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:29:16 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:60425 2017.02.23 11:29:16 LOG7[10]: Service [uwo2local] started 2017.02.23 11:29:16 LOG7[10]: Option TCP_NODELAY set on local socket 2017.02.23 11:29:16 LOG5[10]: Service [uwo2local] accepted connection from 172.18.58.5:60425 2017.02.23 11:29:16 LOG6[10]: failover: round-robin, starting at entry #1 2017.02.23 11:29:16 LOG6[10]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:29:16 LOG7[10]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:29:16 LOG5[10]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:29:16 LOG5[10]: Service [uwo2local] connected remote server from 127.0.0.1:33146 2017.02.23 11:29:16 LOG7[10]: Option TCP_NODELAY set on remote socket 2017.02.23 11:29:16 LOG7[10]: Remote descriptor (FD=9) initialized 2017.02.23 11:29:16 LOG7[10]: RFC 2487 not detected 2017.02.23 11:29:16 LOG6[10]: Peer certificate not required 2017.02.23 11:29:16 LOG7[10]: TLS state (accept): before SSL initialization 2017.02.23 11:29:16 LOG3[10]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:29:16 LOG5[10]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:16 LOG7[10]: Remote descriptor (FD=9) closed 2017.02.23 11:29:16 LOG7[10]: Local descriptor (FD=3) closed 2017.02.23 11:29:16 LOG7[10]: Service [uwo2local] finished (0 left) 2017.02.23 11:29:16 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:16 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:16 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:29:16 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:29:16 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33146 2017.02.23 11:29:16 LOG7[11]: Service [local2o365] started 2017.02.23 11:29:16 LOG3[11]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:29:16 LOG5[11]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:16 LOG7[11]: Local descriptor (FD=3) closed 2017.02.23 11:29:16 LOG7[11]: Service [local2o365] finished (0 left) 2017.02.23 11:29:21 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:21 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:21 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:29:21 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:29:21 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:50381 2017.02.23 11:29:21 LOG7[12]: Service [uwo2local] started 2017.02.23 11:29:21 LOG7[12]: Option TCP_NODELAY set on local socket 2017.02.23 11:29:21 LOG5[12]: Service [uwo2local] accepted connection from 172.18.58.5:50381 2017.02.23 11:29:21 LOG6[12]: failover: round-robin, starting at entry #0 2017.02.23 11:29:21 LOG6[12]: s_connect: connecting ::1:20587 2017.02.23 11:29:21 LOG7[12]: s_connect: s_poll_wait ::1:20587: waiting 10 seconds 2017.02.23 11:29:21 LOG3[12]: s_connect: connect ::1:20587: Connection refused (111) 2017.02.23 11:29:21 LOG6[12]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:29:21 LOG7[12]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:29:21 LOG5[12]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:29:21 LOG5[12]: Service [uwo2local] connected remote server from 127.0.0.1:33150 2017.02.23 11:29:21 LOG7[12]: Option TCP_NODELAY set on remote socket 2017.02.23 11:29:21 LOG7[12]: Remote descriptor (FD=9) initialized 2017.02.23 11:29:21 LOG7[12]: RFC 2487 not detected 2017.02.23 11:29:21 LOG6[12]: Peer certificate not required 2017.02.23 11:29:21 LOG7[12]: TLS state (accept): before SSL initialization 2017.02.23 11:29:21 LOG3[12]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:29:21 LOG5[12]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:21 LOG7[12]: Remote descriptor (FD=9) closed 2017.02.23 11:29:21 LOG7[12]: Local descriptor (FD=3) closed 2017.02.23 11:29:21 LOG7[12]: Service [uwo2local] finished (0 left) 2017.02.23 11:29:21 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:21 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:21 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:29:21 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:29:21 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33150 2017.02.23 11:29:21 LOG7[13]: Service [local2o365] started 2017.02.23 11:29:21 LOG3[13]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:29:21 LOG5[13]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:21 LOG7[13]: Local descriptor (FD=3) closed 2017.02.23 11:29:21 LOG7[13]: Service [local2o365] finished (0 left) 2017.02.23 11:29:26 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:26 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:26 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:29:26 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:29:26 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:7384 2017.02.23 11:29:26 LOG7[14]: Service [uwo2local] started 2017.02.23 11:29:26 LOG7[14]: Option TCP_NODELAY set on local socket 2017.02.23 11:29:26 LOG5[14]: Service [uwo2local] accepted connection from 172.18.58.5:7384 2017.02.23 11:29:26 LOG6[14]: failover: round-robin, starting at entry #1 2017.02.23 11:29:26 LOG6[14]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:29:26 LOG7[14]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:29:26 LOG5[14]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:29:26 LOG5[14]: Service [uwo2local] connected remote server from 127.0.0.1:33152 2017.02.23 11:29:26 LOG7[14]: Option TCP_NODELAY set on remote socket 2017.02.23 11:29:26 LOG7[14]: Remote descriptor (FD=9) initialized 2017.02.23 11:29:26 LOG7[14]: RFC 2487 not detected 2017.02.23 11:29:26 LOG6[14]: Peer certificate not required 2017.02.23 11:29:26 LOG7[14]: TLS state (accept): before SSL initialization 2017.02.23 11:29:26 LOG3[14]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:29:26 LOG5[14]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:26 LOG7[14]: Remote descriptor (FD=9) closed 2017.02.23 11:29:26 LOG7[14]: Local descriptor (FD=3) closed 2017.02.23 11:29:26 LOG7[14]: Service [uwo2local] finished (0 left) 2017.02.23 11:29:26 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:26 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:26 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:29:26 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:29:26 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33152 2017.02.23 11:29:26 LOG7[15]: Service [local2o365] started 2017.02.23 11:29:26 LOG3[15]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:29:26 LOG5[15]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:26 LOG7[15]: Local descriptor (FD=3) closed 2017.02.23 11:29:26 LOG7[15]: Service [local2o365] finished (0 left) 2017.02.23 11:29:31 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:31 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:31 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:29:31 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:29:31 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:40920 2017.02.23 11:29:31 LOG7[16]: Service [uwo2local] started 2017.02.23 11:29:31 LOG7[16]: Option TCP_NODELAY set on local socket 2017.02.23 11:29:31 LOG5[16]: Service [uwo2local] accepted connection from 172.18.58.5:40920 2017.02.23 11:29:31 LOG6[16]: failover: round-robin, starting at entry #0 2017.02.23 11:29:31 LOG6[16]: s_connect: connecting ::1:20587 2017.02.23 11:29:31 LOG7[16]: s_connect: s_poll_wait ::1:20587: waiting 10 seconds 2017.02.23 11:29:31 LOG3[16]: s_connect: connect ::1:20587: Connection refused (111) 2017.02.23 11:29:31 LOG6[16]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:29:31 LOG7[16]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:29:31 LOG5[16]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:29:31 LOG5[16]: Service [uwo2local] connected remote server from 127.0.0.1:33156 2017.02.23 11:29:31 LOG7[16]: Option TCP_NODELAY set on remote socket 2017.02.23 11:29:31 LOG7[16]: Remote descriptor (FD=9) initialized 2017.02.23 11:29:31 LOG7[16]: RFC 2487 not detected 2017.02.23 11:29:31 LOG6[16]: Peer certificate not required 2017.02.23 11:29:31 LOG7[16]: TLS state (accept): before SSL initialization 2017.02.23 11:29:31 LOG3[16]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:29:31 LOG5[16]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:31 LOG7[16]: Remote descriptor (FD=9) closed 2017.02.23 11:29:31 LOG7[16]: Local descriptor (FD=3) closed 2017.02.23 11:29:31 LOG7[16]: Service [uwo2local] finished (0 left) 2017.02.23 11:29:31 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:31 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:31 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:29:31 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:29:31 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33156 2017.02.23 11:29:31 LOG7[17]: Service [local2o365] started 2017.02.23 11:29:31 LOG3[17]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:29:31 LOG5[17]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:31 LOG7[17]: Local descriptor (FD=3) closed 2017.02.23 11:29:31 LOG7[17]: Service [local2o365] finished (0 left) 2017.02.23 11:29:36 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:36 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:36 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:29:36 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:29:36 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:23632 2017.02.23 11:29:36 LOG7[18]: Service [uwo2local] started 2017.02.23 11:29:36 LOG7[18]: Option TCP_NODELAY set on local socket 2017.02.23 11:29:36 LOG5[18]: Service [uwo2local] accepted connection from 172.18.58.5:23632 2017.02.23 11:29:36 LOG6[18]: failover: round-robin, starting at entry #1 2017.02.23 11:29:36 LOG6[18]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:29:36 LOG7[18]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:29:36 LOG5[18]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:29:36 LOG5[18]: Service [uwo2local] connected remote server from 127.0.0.1:33158 2017.02.23 11:29:36 LOG7[18]: Option TCP_NODELAY set on remote socket 2017.02.23 11:29:36 LOG7[18]: Remote descriptor (FD=9) initialized 2017.02.23 11:29:36 LOG7[18]: RFC 2487 not detected 2017.02.23 11:29:36 LOG6[18]: Peer certificate not required 2017.02.23 11:29:36 LOG7[18]: TLS state (accept): before SSL initialization 2017.02.23 11:29:36 LOG3[18]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:29:36 LOG5[18]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:36 LOG7[18]: Remote descriptor (FD=9) closed 2017.02.23 11:29:36 LOG7[18]: Local descriptor (FD=3) closed 2017.02.23 11:29:36 LOG7[18]: Service [uwo2local] finished (0 left) 2017.02.23 11:29:36 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:36 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:36 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:29:36 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:29:36 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33158 2017.02.23 11:29:36 LOG7[19]: Service [local2o365] started 2017.02.23 11:29:36 LOG3[19]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:29:36 LOG5[19]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:36 LOG7[19]: Local descriptor (FD=3) closed 2017.02.23 11:29:36 LOG7[19]: Service [local2o365] finished (0 left) 2017.02.23 11:29:41 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:41 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:41 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:29:41 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:29:41 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:2134 2017.02.23 11:29:41 LOG7[20]: Service [uwo2local] started 2017.02.23 11:29:41 LOG7[20]: Option TCP_NODELAY set on local socket 2017.02.23 11:29:41 LOG5[20]: Service [uwo2local] accepted connection from 172.18.58.5:2134 2017.02.23 11:29:41 LOG6[20]: failover: round-robin, starting at entry #0 2017.02.23 11:29:41 LOG6[20]: s_connect: connecting ::1:20587 2017.02.23 11:29:41 LOG7[20]: s_connect: s_poll_wait ::1:20587: waiting 10 seconds 2017.02.23 11:29:41 LOG3[20]: s_connect: connect ::1:20587: Connection refused (111) 2017.02.23 11:29:41 LOG6[20]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:29:41 LOG7[20]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:29:41 LOG5[20]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:29:41 LOG5[20]: Service [uwo2local] connected remote server from 127.0.0.1:33162 2017.02.23 11:29:41 LOG7[20]: Option TCP_NODELAY set on remote socket 2017.02.23 11:29:41 LOG7[20]: Remote descriptor (FD=9) initialized 2017.02.23 11:29:41 LOG7[20]: RFC 2487 not detected 2017.02.23 11:29:41 LOG6[20]: Peer certificate not required 2017.02.23 11:29:41 LOG7[20]: TLS state (accept): before SSL initialization 2017.02.23 11:29:41 LOG3[20]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:29:41 LOG5[20]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:41 LOG7[20]: Remote descriptor (FD=9) closed 2017.02.23 11:29:41 LOG7[20]: Local descriptor (FD=3) closed 2017.02.23 11:29:41 LOG7[20]: Service [uwo2local] finished (0 left) 2017.02.23 11:29:41 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:41 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:41 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:29:41 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:29:41 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33162 2017.02.23 11:29:41 LOG7[21]: Service [local2o365] started 2017.02.23 11:29:41 LOG3[21]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:29:41 LOG5[21]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:41 LOG7[21]: Local descriptor (FD=3) closed 2017.02.23 11:29:41 LOG7[21]: Service [local2o365] finished (0 left) 2017.02.23 11:29:46 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:46 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:46 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:29:46 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:29:46 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:4464 2017.02.23 11:29:46 LOG7[22]: Service [uwo2local] started 2017.02.23 11:29:46 LOG7[22]: Option TCP_NODELAY set on local socket 2017.02.23 11:29:46 LOG5[22]: Service [uwo2local] accepted connection from 172.18.58.5:4464 2017.02.23 11:29:46 LOG6[22]: failover: round-robin, starting at entry #1 2017.02.23 11:29:46 LOG6[22]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:29:46 LOG7[22]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:29:46 LOG5[22]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:29:46 LOG5[22]: Service [uwo2local] connected remote server from 127.0.0.1:33164 2017.02.23 11:29:46 LOG7[22]: Option TCP_NODELAY set on remote socket 2017.02.23 11:29:46 LOG7[22]: Remote descriptor (FD=9) initialized 2017.02.23 11:29:46 LOG7[22]: RFC 2487 not detected 2017.02.23 11:29:46 LOG6[22]: Peer certificate not required 2017.02.23 11:29:46 LOG7[22]: TLS state (accept): before SSL initialization 2017.02.23 11:29:46 LOG3[22]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:29:46 LOG5[22]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:46 LOG7[22]: Remote descriptor (FD=9) closed 2017.02.23 11:29:46 LOG7[22]: Local descriptor (FD=3) closed 2017.02.23 11:29:46 LOG7[22]: Service [uwo2local] finished (0 left) 2017.02.23 11:29:46 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:46 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:46 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:29:46 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:29:46 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33164 2017.02.23 11:29:46 LOG7[23]: Service [local2o365] started 2017.02.23 11:29:46 LOG3[23]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:29:46 LOG5[23]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:46 LOG7[23]: Local descriptor (FD=3) closed 2017.02.23 11:29:46 LOG7[23]: Service [local2o365] finished (0 left) 2017.02.23 11:29:51 LOG5[cron]: DH parameters updated 2017.02.23 11:29:51 LOG6[cron]: Cron jobs completed in 63 seconds 2017.02.23 11:29:51 LOG7[cron]: Waiting 86337 seconds 2017.02.23 11:29:51 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:51 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:51 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:29:51 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:29:51 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:28318 2017.02.23 11:29:51 LOG7[24]: Service [uwo2local] started 2017.02.23 11:29:51 LOG7[24]: Option TCP_NODELAY set on local socket 2017.02.23 11:29:51 LOG5[24]: Service [uwo2local] accepted connection from 172.18.58.5:28318 2017.02.23 11:29:51 LOG6[24]: failover: round-robin, starting at entry #0 2017.02.23 11:29:51 LOG6[24]: s_connect: connecting ::1:20587 2017.02.23 11:29:51 LOG7[24]: s_connect: s_poll_wait ::1:20587: waiting 10 seconds 2017.02.23 11:29:51 LOG3[24]: s_connect: connect ::1:20587: Connection refused (111) 2017.02.23 11:29:51 LOG6[24]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:29:51 LOG7[24]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:29:51 LOG5[24]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:29:51 LOG5[24]: Service [uwo2local] connected remote server from 127.0.0.1:33168 2017.02.23 11:29:51 LOG7[24]: Option TCP_NODELAY set on remote socket 2017.02.23 11:29:51 LOG7[24]: Remote descriptor (FD=9) initialized 2017.02.23 11:29:51 LOG7[24]: RFC 2487 not detected 2017.02.23 11:29:51 LOG6[24]: Peer certificate not required 2017.02.23 11:29:51 LOG7[24]: TLS state (accept): before SSL initialization 2017.02.23 11:29:51 LOG3[24]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:29:51 LOG5[24]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:51 LOG7[24]: Remote descriptor (FD=9) closed 2017.02.23 11:29:51 LOG7[24]: Local descriptor (FD=3) closed 2017.02.23 11:29:51 LOG7[24]: Service [uwo2local] finished (0 left) 2017.02.23 11:29:51 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:51 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:51 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:29:51 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:29:51 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33168 2017.02.23 11:29:51 LOG7[25]: Service [local2o365] started 2017.02.23 11:29:51 LOG3[25]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:29:51 LOG5[25]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:51 LOG7[25]: Local descriptor (FD=3) closed 2017.02.23 11:29:51 LOG7[25]: Service [local2o365] finished (0 left) 2017.02.23 11:29:56 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:56 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:56 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:29:56 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:29:56 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 172.18.58.5:32441 2017.02.23 11:29:56 LOG7[26]: Service [uwo2local] started 2017.02.23 11:29:56 LOG7[26]: Option TCP_NODELAY set on local socket 2017.02.23 11:29:56 LOG5[26]: Service [uwo2local] accepted connection from 172.18.58.5:32441 2017.02.23 11:29:56 LOG6[26]: failover: round-robin, starting at entry #1 2017.02.23 11:29:56 LOG6[26]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:29:56 LOG7[26]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:29:56 LOG5[26]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:29:56 LOG5[26]: Service [uwo2local] connected remote server from 127.0.0.1:33170 2017.02.23 11:29:56 LOG7[26]: Option TCP_NODELAY set on remote socket 2017.02.23 11:29:56 LOG7[26]: Remote descriptor (FD=9) initialized 2017.02.23 11:29:56 LOG7[26]: RFC 2487 not detected 2017.02.23 11:29:56 LOG6[26]: Peer certificate not required 2017.02.23 11:29:56 LOG7[26]: TLS state (accept): before SSL initialization 2017.02.23 11:29:56 LOG3[26]: SSL_accept: Peer suddenly disconnected 2017.02.23 11:29:56 LOG5[26]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:56 LOG7[26]: Remote descriptor (FD=9) closed 2017.02.23 11:29:56 LOG7[26]: Local descriptor (FD=3) closed 2017.02.23 11:29:56 LOG7[26]: Service [uwo2local] finished (0 left) 2017.02.23 11:29:56 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:29:56 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:29:56 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:29:56 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:29:56 LOG7[ui]: Service [local2o365] accepted (FD=3) from 127.0.0.1:33170 2017.02.23 11:29:56 LOG7[27]: Service [local2o365] started 2017.02.23 11:29:56 LOG3[27]: getpeerbyname (local_rfd): Transport endpoint is not connected (107) 2017.02.23 11:29:56 LOG5[27]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:29:56 LOG7[27]: Local descriptor (FD=3) closed 2017.02.23 11:29:56 LOG7[27]: Service [local2o365] finished (0 left) 2017.02.23 11:30:00 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:30:00 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:30:00 LOG7[ui]: FD=7 events=0x2001 revents=0x1 2017.02.23 11:30:00 LOG7[ui]: FD=8 events=0x2001 revents=0x0 2017.02.23 11:30:00 LOG7[ui]: Service [uwo2local] accepted (FD=3) from 129.100.6.17:16594 2017.02.23 11:30:00 LOG7[28]: Service [uwo2local] started 2017.02.23 11:30:00 LOG7[28]: Option TCP_NODELAY set on local socket 2017.02.23 11:30:00 LOG5[28]: Service [uwo2local] accepted connection from 129.100.6.17:16594 2017.02.23 11:30:00 LOG6[28]: failover: round-robin, starting at entry #0 2017.02.23 11:30:00 LOG6[28]: s_connect: connecting ::1:20587 2017.02.23 11:30:00 LOG7[28]: s_connect: s_poll_wait ::1:20587: waiting 10 seconds 2017.02.23 11:30:00 LOG3[28]: s_connect: connect ::1:20587: Connection refused (111) 2017.02.23 11:30:00 LOG6[28]: s_connect: connecting 127.0.0.1:20587 2017.02.23 11:30:00 LOG7[28]: s_connect: s_poll_wait 127.0.0.1:20587: waiting 10 seconds 2017.02.23 11:30:00 LOG5[28]: s_connect: connected 127.0.0.1:20587 2017.02.23 11:30:00 LOG5[28]: Service [uwo2local] connected remote server from 127.0.0.1:33176 2017.02.23 11:30:00 LOG7[28]: Option TCP_NODELAY set on remote socket 2017.02.23 11:30:00 LOG7[28]: Remote descriptor (FD=9) initialized 2017.02.23 11:30:00 LOG7[ui]: Found 1 ready file descriptor(s) 2017.02.23 11:30:00 LOG7[ui]: FD=4 events=0x2001 revents=0x0 2017.02.23 11:30:00 LOG7[ui]: FD=7 events=0x2001 revents=0x0 2017.02.23 11:30:00 LOG7[ui]: FD=8 events=0x2001 revents=0x1 2017.02.23 11:30:00 LOG7[ui]: Service [local2o365] accepted (FD=10) from 127.0.0.1:33176 2017.02.23 11:30:00 LOG7[29]: Service [local2o365] started 2017.02.23 11:30:00 LOG7[29]: Option TCP_NODELAY set on local socket 2017.02.23 11:30:00 LOG5[29]: Service [local2o365] accepted connection from 127.0.0.1:33176 2017.02.23 11:30:00 LOG6[29]: failover: round-robin, starting at entry #13 2017.02.23 11:30:00 LOG6[29]: s_connect: connecting 2603:1036:405:4a::2:587 2017.02.23 11:30:00 LOG3[29]: s_connect: connect 2603:1036:405:4a::2:587: Network is unreachable (101) 2017.02.23 11:30:00 LOG6[29]: s_connect: connecting 2603:1036:3:11e::2:587 2017.02.23 11:30:00 LOG3[29]: s_connect: connect 2603:1036:3:11e::2:587: Network is unreachable (101) 2017.02.23 11:30:00 LOG6[29]: s_connect: connecting 2603:1036:404:56::2:587 2017.02.23 11:30:00 LOG3[29]: s_connect: connect 2603:1036:404:56::2:587: Network is unreachable (101) 2017.02.23 11:30:00 LOG6[29]: s_connect: connecting 40.97.132.210:587 2017.02.23 11:30:00 LOG7[29]: s_connect: s_poll_wait 40.97.132.210:587: waiting 10 seconds 2017.02.23 11:30:00 LOG5[29]: s_connect: connected 40.97.132.210:587 2017.02.23 11:30:00 LOG5[29]: Service [local2o365] connected remote server from 172.18.58.248:52538 2017.02.23 11:30:00 LOG7[29]: Option TCP_NODELAY set on remote socket 2017.02.23 11:30:00 LOG7[29]: Remote descriptor (FD=11) initialized 2017.02.23 11:30:00 LOG7[29]: <- 220 MWHPR2001CA0006.outlook.office365.com Microsoft ESMTP MAIL Service ready at Thu, 23 Feb 2017 16:30:00 +0000 2017.02.23 11:30:00 LOG7[29]: -> 220 MWHPR2001CA0006.outlook.office365.com Microsoft ESMTP MAIL Service ready at Thu, 23 Feb 2017 16:30:00 +0000 2017.02.23 11:30:00 LOG7[29]: -> EHLO localhost 2017.02.23 11:30:00 LOG7[28]: RFC 2487 detected 2017.02.23 11:30:00 LOG7[28]: <- 220 MWHPR2001CA0006.outlook.office365.com Microsoft ESMTP MAIL Service ready at Thu, 23 Feb 2017 16:30:00 +0000 2017.02.23 11:30:00 LOG7[28]: -> 220 MWHPR2001CA0006.outlook.office365.com stunnel for Microsoft ESMTP MAIL Service ready at Thu, 23 Feb 2017 16:30:00 +0000 2017.02.23 11:30:00 LOG7[29]: <- 250-MWHPR2001CA0006.outlook.office365.com Hello [129.100.1.192] 2017.02.23 11:30:00 LOG7[29]: <- 250-SIZE 157286400 2017.02.23 11:30:00 LOG7[29]: <- 250-PIPELINING 2017.02.23 11:30:00 LOG7[29]: <- 250-DSN 2017.02.23 11:30:00 LOG7[29]: <- 250-ENHANCEDSTATUSCODES 2017.02.23 11:30:00 LOG7[29]: <- 250-STARTTLS 2017.02.23 11:30:00 LOG7[29]: <- 250-8BITMIME 2017.02.23 11:30:00 LOG7[29]: <- 250-BINARYMIME 2017.02.23 11:30:00 LOG7[29]: <- 250-CHUNKING 2017.02.23 11:30:00 LOG7[29]: <- 250 SMTPUTF8 2017.02.23 11:30:00 LOG7[29]: -> STARTTLS 2017.02.23 11:30:00 LOG7[29]: <- 220 2.0.0 SMTP server ready 2017.02.23 11:30:00 LOG6[29]: SNI: sending servername: smtp.office365.com 2017.02.23 11:30:00 LOG6[29]: Peer certificate required 2017.02.23 11:30:00 LOG7[29]: TLS state (connect): before SSL initialization 2017.02.23 11:30:00 LOG7[29]: TLS state (connect): SSLv3/TLS write client hello 2017.02.23 11:30:00 LOG7[29]: TLS state (connect): SSLv3/TLS write client hello 2017.02.23 11:30:00 LOG7[29]: TLS state (connect): SSLv3/TLS read server hello 2017.02.23 11:30:00 LOG7[29]: Verification started at depth=1: C=US, O=DigiCert Inc, CN=DigiCert Cloud Services CA-1 2017.02.23 11:30:00 LOG4[29]: CERT: Pre-verification error: unable to get local issuer certificate 2017.02.23 11:30:00 LOG4[29]: Rejected by CERT at depth=1: C=US, O=DigiCert Inc, CN=DigiCert Cloud Services CA-1 2017.02.23 11:30:00 LOG7[29]: Remove session callback 2017.02.23 11:30:00 LOG7[29]: Deallocating application specific data for addr index 2017.02.23 11:30:00 LOG7[29]: TLS alert (write): fatal: unknown CA 2017.02.23 11:30:00 LOG3[29]: SSL_connect: 1416F086: error:1416F086:SSL routines:tls_process_server_certificate:certificate verify failed 2017.02.23 11:30:00 LOG5[29]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2017.02.23 11:30:00 LOG7[29]: Deallocating application specific data for addr index Segmentation fault [root@mtar1 stunnel]# *Andrew Culver* System Administrator Information Technology Services <https://www.uwo.ca/its> University of Western Ontario <https://www.uwo.ca> e: aculver(a)uwo.ca p: 519-661-2111 x80265 <15196612111,80265> cal: html <http://goo.gl/wVoDlo> | ics <http://goo.gl/ncUjV0>

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users