- stunnel-users - stunnel.org

Issue with NTLM authorisation
by Vijay Raghavan P 01 Mar '19

01 Mar '19

Hi, I have to create tunnel between server and client. Client have proxy configured in between. So i use below in /etc/stunnel/stunnel.config. User name and password is correct pid = /var/run/stunnel.pid cert = /home/client.crt key = /home/client.key options = NO_SSLv2 debug = 7 output = /var/log/stunnel4/stunnel.log client = yes CAfile=/home/**chain.pem verify=2 [test] protocol = connect accept = 127.0.0.1:10000 protocolHost = host.vmj.com:443 connect = <PROXYIP>:<PROXY port> protocolUsername = vmj.com\user1 protocolPassword = VMJTEST!123 protocolAuthentication = NTLM In stunnel.log, i can see below error 2019.02.28 18:36:50 LOG6[2103:140737354032896]: Client-mode connect protocol negotiations started 2019.02.28 18:36:50 LOG7[2103:140737354032896]: -> CONNECT host.vmj.com:443 HTTP/1.1 2019.02.28 18:36:50 LOG7[2103:140737354032896]: -> Host: host.vmj.com:443 2019.02.28 18:36:50 LOG7[2103:140737354032896]: -> Proxy-Connection: keep-alive 2019.02.28 18:36:50 LOG7[2103:140737354032896]: -> Proxy-Authorization: NTLM TlRMTVNTUAABAAAAAgIAAA== 2019.02.28 18:36:50 LOG7[2103:140737354032896]: -> 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- HTTP/1.1 407 Proxy Authentication Required 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Server: squid/3.3.8 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Mime-Version: 1.0 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Date: Thu, 28 Feb 2019 18:36:33 GMT 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Content-Type: text/html 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Content-Length: 3285 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- X-Squid-Error: ERR_CACHE_ACCESS_DENIED 0 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Vary: Accept-Language 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Content-Language: en 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Proxy-Authenticate: NTLM TlRMTVNTUAACAAAAAAAAADgAAAACAgACueAMGSlaSZ0AAAAAAAAAAAAAAAA4AAAABgEAAAAAAA8= 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- X-Cache: MISS from squidproxy.vmj.com 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- X-Cache-Lookup: NONE from squidproxy.vmj.com:3128 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Via: 1.1 squidproxy.vmj.com (squid/3.3.8) 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Connection: keep-alive 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- 2019.02.28 18:36:50 LOG7[2103:140737354032896]: -> CONNECT host.vmj.com:443 HTTP/1.1 2019.02.28 18:36:50 LOG7[2103:140737354032896]: -> Host: host.vmj.com:443 2019.02.28 18:36:50 LOG7[2103:140737354032896]: -> Proxy-Authorization: NTLM TlRMTVNTUAADAAAAAAAAAGcAAAAYABgAQAAAAAAAAABnAAAADwAPAFgAAAAAAAAAZwAAAAAAAABnAAAAAgIAAAGbqH5v5ML8msrfm3R1yDBsS+ai3ldihnZybmkuY29tXGJoYXJ0aQ== 2019.02.28 18:36:50 LOG7[2103:140737354032896]: -> 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- HTTP/1.1 407 Proxy Authentication Required 2019.02.28 18:36:50 LOG3[2103:140737354032896]: CONNECT request rejected 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Server: squid/3.3.8 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Mime-Version: 1.0 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Date: Thu, 28 Feb 2019 18:36:33 GMT 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Content-Type: text/html 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Content-Length: 3363 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- X-Squid-Error: ERR_CACHE_ACCESS_DENIED 0 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Vary: Accept-Language 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Content-Language: en 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Proxy-Authenticate: NTLM 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- X-Cache: MISS from squidproxy.vmj.com 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- X-Cache-Lookup: NONE from squidproxy.vmj.com:3128 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Via: 1.1 squidproxy.vmj.com (squid/3.3.8) 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- Connection: keep-alive 2019.02.28 18:36:50 LOG7[2103:140737354032896]: <- 2019.02.28 18:36:50 LOG5[2103:140737354032896]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2019.02.28 18:36:50 LOG7[2103:140737354032896]: Remote socket (FD=14) closed 2019.02.28 18:36:50 LOG7[2103:140737354032896]: Local socket (FD=3) closed 2019.02.28 18:36:50 LOG7[2103:140737354032896]: Service [test] finished (0 left) If i try with basic authentication it works fine. Its urgent , can some one help me out. Thanks, Vj

2 1

Tunnel from win32 to Unix
by Eetu Pikkarainen 26 Feb '19

26 Feb '19

Hi, I am a totally newbie with this. We have intranet system in Windows Server (32bit) which reads a database (Oracle) situated in Unix machine via a tunnel made by Putty.exe. That works well except that the connection gets lost every now and then and it must be manually logged in every time. So I decided to try stunnel which we used earlier to read email from email server. However I cannot set the connection successfully. This is what I have tried now (among many other alternatives): [Kanto2] client = yes accept = 127.0.0.1:1501 connect = kanto2.oulu.fi:22 protocolUsername = <username> protocolPassword = <password> stunnel reads the configuration OK except this notification: [:] Service [Kanto2] needs authentication to prevent MITM attacks but when the database is tried to read happens this: 2019.02.18 13:32:30 LOG5[1]: Service [Kanto2] accepted connection from 127.0.0.1:64699 2019.02.18 13:32:30 LOG5[1]: s_connect: connected 130.231.240.100:22 2019.02.18 13:32:30 LOG5[1]: Service [Kanto2] connected remote server from 130.231.241.250:64700 2019.02.18 13:32:30 LOG3[1]: SSL_connect: 140770FC: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol 2019.02.18 13:32:30 LOG5[1]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket I have tried different protocol alternatives with no help. What could be the problem? Is this kind of use even possible? thanks Eetu Pikkarainen PhD (Ed.), (Title of) Adjunct Prof., University Lecturer (in Education) Faculty of Education, University of Oulu, Finland Research Group: https://wiki.oulu.fi/display/theored Latest publications: Semiotic Theory of Learning: New Perspectives in the Philosophy of Education. By Andrew Stables, Winfried Nöth, Alin Olteanu, Sébastien Pesce and Eetu Pikkarainen https://www.taylorfrancis.com/books/e/9781351725170 Schools in Transition: Linking Past, Present, and Future in Educational Practice. Edited by Pauli Siljander, Kimmo Kontio and Eetu Pikkarainen https://www.sensepublishers.com/catalogs/bookseries/other-books/schools-in-…

2 1

Stunnel 3.50 Win - CAPI stopped working
by pepak＠seznam.cz 18 Feb '19

18 Feb '19

Hello, I have encountered a bug in Stunnel version 3.50. I have a setup with two computers (Server and Client) connected using Stunnel. The client is using a hardware token through the CAPI engine to authenticate itself to a server, using a config file: ----- fips = no taskbar = yes options = NO_SSLv2 options = NO_SSLv3 sslVersion = TLSv1.2 engine = capi [my-server] client = yes accept = 22 connect = my.server.com:1234 requireCert = yes verifyChain = yes verifyPeer = yes CAfile = my-cert-chain.pem engineId = capi ----- This setup works perfectly in Stunnel 3.49: When I try to connect to localhost:22, I receive a request to select a certificate and enter its PIN, and if successful, a connection to my server is established. In Stunnel 3.50, the connection fails to complete. The Stunnel log shows: LOG5[0]: Service [my-server] accepted connection from 127.0.0.1:49713 LOG5[0]: s_connect: connected 1.2.3.4:1234 LOG5[0]: Service [my-server] connected remote server from 10.11.12.13:49714 LOG5[0]: Certificate accepted at depth=0: CN=My server LOG3[0]: error queue: 141F0006: error:141F0006:SSL routines:tls_construct_cert_verify:EVP lib LOG3[0]: SSL_connect: 8006F074: error:8006F074:lib(128):capi_rsa_priv_enc:function not supported LOG5[0]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket However, if I change the engine to the default one and use a certificate in file, everything works fine. That suggests to me that the problem lies in the Stunnel's CAPI engine library. It is quite possible the problem is caused by the CAPI engine itself. I was experimenting with OpenSSL 1.1.1a some time back, trying to compile my own library files, and I just couldn't to get CAPI to work at all - the libraries themselves compiled OK and worked fine, but the CAPI engine just wouldn't work (while it was OK with OpenSSL 1.0.2q); the only way I could get CAPI to work with OpenSSL 1.1.1a was to use the 1.1.1a libraries and the 1.0.2q capi.dll. However, I am far from an expert on compiling OpenSSL, so I may have gotten it completely wrong. Could someone please verify that their CAPI engine is working with Stunnel? Also, it may be worth trying to compile a 64bit CAPI.dll from version 1.0.2q just to see if it might start working - in that case, a bug report to OpenSSL may be in order. Thanks. pepak

2 1

Timeout's issue / network stunnel on virtual apps
by Marian Andrei Olteanu 17 Feb '19

17 Feb '19

Hi all, I have a client - server application which works as following. The server is hosted in a linux machine and the clients are up in citrix(XEN) virtual machines. I have enable stunnel encry. in between this environments but i keep getting some connection issues from time to time. To be more clear the client application starts a session for you from the virtual machine (xen) so the stunnel.exe running there in the server is meant to encrypt traffic of around 100 users(from win AD who have access to use that resource in the server) , port configured in VM machine 1001 accept - linux.host:1002 connect with linux accept on 1002 - localhost:1000. the channel opened between the VM and Linux is used by many users simultaneous. Could please tell me what is happening here?Is this architecture able to work? thank you in advance. Marian

1 0

stunnel stopped working today, had to reboot server
by Christopher Schultz 14 Feb '19

14 Feb '19

Hello, I'm new to the list so I'm sorry if this isn't the right place to report this. I had a server stop responding to stunnel connections sometime yesterday and the resolution was ultimately to reboot the server and everything was okay. Restarting the stunnel service was not enough to get things working again. I isolated the problem to stunnel by checking that the underlying service (a Java web application) would respond from the localhost machine (it did) but an openssl s_client connection to localhost:stunnel-port would connect but not proceed past the CONNECTED(3) state. Ultimately, it would time-out. stunnel was not logging anything to syslog when these connections came in. Outgoing stunnel connections seemed to be okay. Looking through the log file, I could see that there were some odd messages coming from stunnel in the daemon.log file suggesting that there might be a memory leak. I won't post them here unless requested, as they may represent a potential security issue. My concern is that a service-restart for stunnel was not sufficient. This suggests a problem which goes deeper than the stunnel service. Is it possible for stunnel to break in such a way that it continues to be broken after a restart? I'm sorry, in retrospect, I was not 100% sure that the service did indeed stop and launch a new process when running /etc/init.d/stunnel restart, but there were no errors and the service-runner did report that the service was restarted. My (simplified) configuration and version information is posted below. Please let me know if there is any other information I might be able to provide in order to investigate this. Note that this is a package-managed version of stunnel, provided by the Debian package-maintainers. Thanks, -chris PS Thanks for a wonderful product. I've relied on stunnel for years to proxy these unencrypted AJP connections for me. Cheers for all your great work. Configuration: === CUT === cert = /etc/stunnel/stunnel.crt key = /etc/stunnel/stunnel.pem sslVersion = TLSv1.2 options = NO_SSLv3 options = NO_TLSv1 options = NO_TLSv1.1 chroot = /var/lib/stunnel4/ setuid = stunnel4 setgid = stunnel4 pid = /stunnel4-ajp.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 verify = 4 CAfile = /etc/stunnel/stunnel-ajp-trusted.pem [now, a series of 4 services, all configured similarly] accept=public-port connect=localhost:private-port === CUT === Version: stunnel 5.39 on x86_64-pc-linux-gnu platform Compiled with OpenSSL 1.1.0c 10 Nov 2016 Running with OpenSSL 1.1.0j 20 Nov 2018 Update OpenSSL shared libraries or rebuild stunnel Threading:PTHREAD Sockets:POLL,IPv6,SYSTEMD TLS:ENGINE,FIPS,OCSP,PSK,SNI Auth:LIBWRAP Global options: debug = daemon.notice pid = /var/run/stunnel4.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes Service-level options: ciphers = FIPS (with "fips = yes") ciphers = HIGH:+3DES:+DH:!aNULL:!SSLv2 (with "fips = no") curve = prime256v1 debug = notice logId = sequential options = NO_SSLv2 options = NO_SSLv3 sessionCacheSize = 1000 sessionCacheTimeout = 300 seconds stack = 65536 bytes TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds verify = none Linux kernel version: Linux [hostname] 4.9.0-8-amd64 #1 SMP Debian 4.9.130-2 (2018-10-27) x86_64 GNU/Linux This is running on a bare metal server.

2 5

Re: [stunnel-users] Problem with name resolving on Centos 7
by tom 13 Feb '19

13 Feb '19

Hello, > Are you sure 'foobar.remote.site' should resolve? > Does "ping foobar.remote.site" work? yes, the host is resolved on commandline and other services on this system can reach this host. > Do you have a /var/run/stunnel/etc/resolv.conf file? No at this time I dont have this file, but it doesnt change anything if I copy the original from /etc to this lokation. But this brings me to the point try to dissable chroot and in this case stunnel is working as expected. So far so good - there is something wrong in the chroot jail. I try to put it to /var/run/stunnel - no luck, but maybe there are other files missing as well? regards Tom

4 10

Problem with name resolving on Centos 7
by tom 12 Feb '19

12 Feb '19

Hello, I've installed stunnel-4.56-6.el7.x86_64 on my Centos 7. I can't establish a connection. Seems to be something wrong with the name resolution, because if I use the IP derect, the tunnel works. Feb 12 11:58:00 server stunnel[52445]: LOG7[52445:139984526436416]: Service [cs] accepted (FD=3) from 127.0.0.1:10866 Feb 12 11:58:00 server stunnel[52445]: LOG7[52445:139984526432000]: Service [cs] started Feb 12 11:58:00 server stunnel[52445]: LOG7[52445:139984526432000]: Waiting for a libwrap process Feb 12 11:58:00 server stunnel[52445]: LOG7[52445:139984526432000]: Acquired libwrap process #0 Feb 12 11:58:00 server stunnel[52445]: LOG7[52445:139984526432000]: Releasing libwrap process #0 Feb 12 11:58:00 server stunnel[52445]: LOG7[52445:139984526432000]: Released libwrap process #0 Feb 12 11:58:00 server stunnel[52445]: LOG7[52445:139984526432000]: Service [cs] permitted by libwrap from 127.0.0.1:10866 Feb 12 11:58:00 server stunnel[52445]: LOG5[52445:139984526432000]: Service [cs] accepted connection from 127.0.0.1:10866 Feb 12 11:58:00 server stunnel[52445]: LOG3[52445:139984526432000]: Error resolving 'foobar.remote.site': System error returned in errno (EAI_SYSTEM) Feb 12 11:58:00 server stunnel[52445]: LOG3[52445:139984526432000]: No host resolved Feb 12 11:58:00 server stunnel[52445]: LOG5[52445:139984526432000]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket Feb 12 11:58:00 server stunnel[52445]: LOG7[52445:139984526432000]: Local socket (FD=3) closed Feb 12 11:58:00 server stunnel[52445]: LOG7[52445:139984526432000]: Service [cs] finished (0 left) stunnel.conf: socket = r:TCP_NODELAY=1 socket = l:TCP_NODELAY=1 options = CIPHER_SERVER_PREFERENCE TIMEOUTclose = 0 sslVersion = TLSv1 options = NO_SSLv2 options = NO_SSLv3 client = yes options = DONT_INSERT_EMPTY_FRAGMENTS cert = /etc/stunnel/stunnel.pem key = /etc/stunnel/stunnel.pem debug = 7 chroot = /var/run/stunnel setuid = stunnel setgid = stunnel pid = /stunnel.pid fips = no [srvice] accept = 63123 connect = foobar.remote.site:63123 delay = yes Any suggestions are very welcome! Thanks in advance Tom

3 2

Stunnel 5.50 Transparent Both (Source+Destination)
by Luis Monteiro 01 Feb '19

01 Feb '19

Sirs. I´m trying to make Stunnel work in both source and destination transparent proxy and after looking every possibility I started to track the packet that is locally generated (Stunnel client sending to stunnel server). The packet goes out from process to raw table output chain. It deliveries to connect tracking that pass the packet to mangle output but it disappears before arriving in the nat table output chain. Stunnel Packet destination 7.0.0.2:80(Original destination)------raw/output-----connectTrack------mangle/output-------XXXX disappear With transparent destination off it works fine. Stunnel Packet destination 9.0.0.2:443(Stunnel Server IP)------raw/output-----connectTrack------mangle/output-------nat/output---- filter/output----interface The problem is probably regarding the tproxy/ip_transparent that stunnel use to control the connection and get the original src/dst to use. I tried 3 different distribution of linux with the same behavior. Does someone already use transparent=both and give me a setup that worked link linux distribution/version, stunnel version and so on? Thanks, Luis Monteiro

1 1

Re: [stunnel-users] How can stunnel use openssl HW cryptodev encryption
by Eric Eberhard 28 Jan '19

28 Jan '19

I'll give you two pieces of advice that almost everyone on the list won't agree with :) 1) Make a static openssl and static stunnel and locate them someplace apart from the standard locations (/usr/local/company_name/lib is what I use). This means if anyone messes with openssl or stunnel you won't be affected - and it will always work as it is static - and part of your application - the user does not even need your libraries. I have a personal distaste for dynamic linking . mostly because I have a lot of customers that update a lot of things (including openssl - a lot - and stunnel sometimes) . and then wonder why things stop working. A 10 year old openssl and stunnel - all static - will still run and work fine past all updates and user messing around. I choose when I want to update openssl and stunnel (meaning I look to see if there is something new I need or want). As a result I missed the keep alive and poodle bugs - I did not update until after both were fixed. 2) Forget hardware implementation - geez - modern computers are so darn fast that I cannot imagine you really need that level of "speed up" versus the grief you are handling. I have customers that exchange millions (4+) XML documents a day, all through stunnel, all through inetd (also not efficient supposedly - just reliable and always works and needs no management) - and have no problems. I am using IBM p Series (AIX) and these machines even at the low level are fast . but I also use some SCO and Linux and certainly with lesser volume they are fine as well. 3) OK - 3 is really - use inetd, so much easier and always works (assuming you have Unix). If inetd crashes Unix crashes so . see number 2 for reasons :) Of course, these ideas won't help much if you don't have a Unix variation or if you are really that tight on performance (although if you are I'd suggest hardware upgrades!). Good luck with your project, Eric From: stunnel-users [mailto:stunnel-users-bounces@stunnel.org] On Behalf Of Tamar Pedersen Sent: Wednesday, January 16, 2019 1:06 PM To: stunnel-users(a)stunnel.org Subject: [stunnel-users] How can stunnel use openssl HW cryptodev encryption Hello, I am evaluating stunnel, to see if it is a viable solution for providing encryption in a system that contains an Atmel processor which includes a HW accelerated encryption block. I am just ramping up on stunnel, and figured I should capture what I have done so far. My questions will come towards the end of my email. My research indicates that stunnel incorporates openssl. I have been able to use openssl independently, to access the cryptodev HW encryption engine, in the Linux kernel module located in /lib/modules/4.14.79/extra/cryptodev.ko. When openssl is run without accessing the cryptodev engine (cryptodev module not loaded), I get the pure SW encryption implementation provided by default in openssl. When I run bench mark speed tests using openssl, using SW encryption, I see the following results: # time -v openssl speed -evp aes-128-cbc Doing aes-128-cbc for 3s on 16 size blocks: 1689887 aes-128-cbc's in 2.95s Doing aes-128-cbc for 3s on 64 size blocks: 568389 aes-128-cbc's in 2.95s Doing aes-128-cbc for 3s on 256 size blocks: 151550 aes-128-cbc's in 2.96s Doing aes-128-cbc for 3s on 1024 size blocks: 38599 aes-128-cbc's in 2.96s Doing aes-128-cbc for 3s on 8192 size blocks: 4845 aes-128-cbc's in 2.95s OpenSSL 1.0.2p-fips 14 Aug 2018 built on: reproducible build, date unspecified options:bn(64,32) rc4(ptr,char) des(idx,cisc,16,long) aes(partial) idea(int) blowfish(ptr) compiler: arm-laird-linux-gnueabi-gcc -I. -I.. -I../include -fPIC -DOPENSSL_PIC -DZLIB_SHARED -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -DHAVE_CRYPTODEV -DUSE_CRYPTODEV_DIGESTS -Wall -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -I/home/sii/wb50n_space2_legacy_6.0.0.x/wb/buildroot/output/wb50n_space2_leg acy/host/arm-buildroot-linux-gnueabi/sysroot/usr/local/ssl/fips-2.0/include -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DAES_ASM -DBSAES_ASM -DGHASH_ASM The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 9165.49k 12331.15k 13107.03k 13353.17k 13454.32k Command being timed: "openssl speed -evp aes-128-cbc" User time (seconds): 14.81 System time (seconds): 0.10 Percent of CPU this job got: 99% Elapsed (wall clock) time (h:mm:ss or m:ss): 0m 15.06s Average shared text size (kbytes): 0 Average unshared data size (kbytes): 0 Average stack size (kbytes): 0 Average total size (kbytes): 0 Maximum resident set size (kbytes): 13376 Average resident set size (kbytes): 0 Major (requiring I/O) page faults: 0 Minor (reclaiming a frame) page faults: 145 Voluntary context switches: 0 Involuntary context switches: 721 Swaps: 0 File system inputs: 0 File system outputs: 0 Socket messages sent: 0 Socket messages received: 0 Signals delivered: 0 Page size (bytes): 4096 Exit status: 0 # When I load the cryptodev module, and take advantage of the accelerated hardware encryption the benchmark tests are significantly faster. Here is what those results look like. # modprobe cryptodev # time -v openssl speed -evp aes-128-cbc Doing aes-128-cbc for 3s on 16 size blocks: 44163 aes-128-cbc's in 0.12s Doing aes-128-cbc for 3s on 64 size blocks: 31345 aes-128-cbc's in 0.15s Doing aes-128-cbc for 3s on 256 size blocks: 18923 aes-128-cbc's in 0.11s Doing aes-128-cbc for 3s on 1024 size blocks: 13847 aes-128-cbc's in 0.13s Doing aes-128-cbc for 3s on 8192 size blocks: 8427 aes-128-cbc's in 0.06s OpenSSL 1.0.2p-fips 14 Aug 2018 built on: reproducible build, date unspecified options:bn(64,32) rc4(ptr,char) des(idx,cisc,16,long) aes(partial) idea(int) blowfish(ptr) compiler: arm-laird-linux-gnueabi-gcc -I. -I.. -I../include -fPIC -DOPENSSL_PIC -DZLIB_SHARED -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -DHAVE_CRYPTODEV -DUSE_CRYPTODEV_DIGESTS -Wall -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -I/home/sii/wb50n_space2_legacy_6.0.0.x/wb/buildroot/output/wb50n_space2_leg acy/host/arm-buildroot-linux-gnueabi/sysroot/usr/local/ssl/fips-2.0/include -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DAES_ASM -DBSAES_ASM -DGHASH_ASM The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 5888.40k 13373.87k 44038.98k 109071.75k 1150566.40k Command being timed: "openssl speed -evp aes-128-cbc" User time (seconds): 0.59 System time (seconds): 8.72 Percent of CPU this job got: 61% Elapsed (wall clock) time (h:mm:ss or m:ss): 0m 15.11s Average shared text size (kbytes): 0 Average unshared data size (kbytes): 0 Average stack size (kbytes): 0 Average total size (kbytes): 0 Maximum resident set size (kbytes): 13792 Average resident set size (kbytes): 0 Major (requiring I/O) page faults: 0 Minor (reclaiming a frame) page faults: 144 Voluntary context switches: 41154 Involuntary context switches: 3321 Swaps: 0 File system inputs: 0 File system outputs: 0 Socket messages sent: 0 Socket messages received: 0 Signals delivered: 0 Page size (bytes): 4096 Exit status: 0 # As can be seen in the results (hi-lighted in red), the average speed to do aes-128-cbc encryption jumped from around 2.95 s to 0.10 s. Also of interest is the context switches are significantly higher when running hardware encryption, because of interrupts and overhead to use the hardware engine. I can also look at /proc/interrupts and see significant increases in atmel-aes interrupt counts when using the cryptodev HW acceleration encryption engine. This gives a good indication that the cryptodev module is in use, and is doing encryption. I would like to try to figure out how to allow stunnel to take advantage of the cryptodev HW acceleration encryption engine available in openssl. I have made some attempts, but so far, I have not been able to determine if stunnel is successfully using the cryptodev engine. Here is what I have done with stunnel. I already have a client and server successfully communicating with each other using stunnel. To verify this I used the "nc" utility to send characters back and forth between two different machines. The stunnel.conf file, on the server, is out of the box. I'm interested in encrypting on the client side. Here is my current client.conf file, in /etc/stunnel: # cat client.conf debug = 7 output = /tmp/stunnel-server.log pid = /tmp/stunnel.pid engine = cryptodev [test] verify = 1 client = yes accept = 127.0.0.1:2000 connect = 192.168.0.220:30000 CAfile = /etc/stunnel/certificate.crt engineNum = 1 # I am attempting to set up the cryptodev to be the configured engine for the client. I am able to start stunnel, using client.conf, as follows: # stunnel /etc/stunnel/client.conf # If I do a "ps" command to display processes, I can see that stunnel is running in the background. At this point, I can use "nc" to send data, as follows: # nc 127.0.0.1 2000 < /tmp/long_file.txt I am able to see the text from long_file.txt on the server, which is also running nc. The problem is that I don't see interrupts increasing in /proc/interrupts, which leaves me wondering if I have not configured stunnel correctly to use the cryptodev engine. If I try to remove the cryptodev module as this point, while stunnel is running, I receive a message that it is in use, as follows: # modprobe -r cryptodev modprobe: FATAL: Module cryptodev is in use. # If I kill the stunnel process, I am able to successfully remove the cryptodev module, which seems to suggest stunnel is the process using the cryptodev module. Also, once I have removed the cryptodev module, I can't restart stunnel. Instead, I get the following errors back: # stunnel /etc/stunnel/client.conf [.] stunnel 5.44 on arm-buildroot-linux-gnueabi platform [.] Compiled/running with OpenSSL 1.0.2p-fips 14 Aug 2018 [.] Threading:FORK Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI [ ] errno: (*__errno_location ()) [.] Reading configuration from file /etc/stunnel/client.conf [.] UTF-8 byte order mark not detected [ ] Enabling support for engine "cryptodev" [!] error queue: 2606A074: error:2606A074:engine routines:ENGINE_by_id:no such engine [!] error queue: 260B6084: error:260B6084:engine routines:DYNAMIC_LOAD:dso not found [!] error queue: 25070067: error:25070067:DSO support routines:DSO_load:could not load the shared library [!] ENGINE_by_id: 25066067: error:25066067:DSO support routines:DLFCN_LOAD:could not load the shared library [!] /etc/stunnel/client.conf:5: "engine = cryptodev": Failed to open the engine # Again, this suggests stunnel is trying to use cryptodev. I just don't know how to prove I am taking advantage of the HW encryption acceleration engine. I never see interrupts updating in /proc/interrupts when using nc, while stunnel is running. So, here are my questions: 1.) Does it look like I have things set up correctly in client.conf, to use the cryptodev engine? 2.) If client.conf is correct, how can I prove that stunnel is using the cryptodev engine, since I don't see the expected interrupts? One idea is that the cryptodev module might not support the type of encryption being requested by the certificate, so openssl falls back to the pure SW encryption implementation. I know the Atmel chip in question supports the following: # openssl engine -t -c (cryptodev) cryptodev engine [RSA, DSA, DH, DES-CBC, DES-EDE3-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC, MD5, SHA1, SHA256, SHA384, SHA512] [ available ] (dynamic) Dynamic engine loading support [ unavailable ] # I was able to decode the contents of the certificate, and it says it is sha256WithRSAEncryption. My engine supports SHA256 and RSA, but does it support combining, like SHA256WithRSA? I'm not sure. I'll keep chasing that one. Thanks for any guidance on how to use the cryptodev in stunnel. Regards, Tamar

2 2

Max Performance of Stunnel
by Luis Monteiro 21 Jan '19

21 Jan '19

I'm testing Stunnel with Ixia traffic generator (Breakingpoint Virtual Edition) and I got a limited performance of 3.5Gbps full duplex even with 6 or 9 cpu in the esxi vm. The processors are fully dedicated as well memory all reserved with passthrough od network cards intel x540 10Gbps, 2 ports. The 2 vm are similar with one running stunnel client and the other as stunnel server. The page performance of Stunnel of 5.5Gbps but doesn't inform if it's half or full since in the operation the stunnel has to deal with 2 flow coming and going. If it was 5.5Gbps total makes sense since I'm using 2 x Scalable Gold 6140 and gave me 7Gbps encryption + decryption with AES-NI I think since we are not a feasible solution to check on the fly only the overall performance. I'm using the same cipher suit of performance information of Stunnel. Does anyone know if the performance numbers is considering the total performance or full duplex? Does someone have any tip to improve the performance? Thanks, Luis Monteiro

1 0

Transparente destination
by Luis Monteiro 17 Jan '19

17 Jan '19

Sirs. I tested the stunnel client connect to a stunnel server to proxy transparent a http traffic. I used a traffic generator from Ixia (BPS), a tap to get the traffic between stunnel´s using ntop license pf_ring (Kernel bypass) with tcpdump accessing their libs and export pcaps from source and destination from Ixia. Transparent source worked flawless easily using the information on man page. Transparent destination didn´t worked. The instructions in the stunnel documentation for each are: /sbin/iptables -I INPUT -i client_interface -p tcp --dport 443 (I´m using default port os https) -j ACCEPT ----- It is filter INPUT that is executed after routing decision after nat to allow packets with destination port 443 /sbin/iptables -t nat -I PREROUTING -p tcp --dport 80 (Destination port of http in client_interface \ -i client_interface -j DNAT --to-destination 9.0.0.2:443 (connect destination on server Stunnel) The second input in iptables is executed before the routing decision and that is the problem. Looking the hit count of in iptables the nat table PREROUTING always have a hit but the filter table filter INPUT doesn´t. I set a policy routing to delivey packets to 9.0.0.2:443 to local process and the filter table filter INPUT started to receive the hit in the counters as well but stunnel didn´t worked. If I change the connect destination address to local interface 9.0.0.1:443 I do not need the pocily routing since it´s local but Stunnel did not worked too. The stunnel configuration for the client is bellow: #setgid = root #setuid = root debug = 7 log = overwrite syslog = no output = /root/stunnel.log ;engine = ENGINE_ID ;engineCtrl = COMMAND[:PARAMETER] ;engineDefault = TASK_LIST [http] client = yes accept = 6.0.0.1:80 ;connect = 9.0.0.2:443 ciphers = AES128-GCM-SHA256 requireCert = no sslVersion = TLSv1.2 transparent = destination At the end I´d like to use both source and destination but I´m testing separated. Does anyone know if there is a bug related or if there is a version working fine? Even with a lot o resource I don´t have more what to do about and any help would be appreciated. Luis Monteiro

1 0

How can stunnel use openssl HW cryptodev encryption
by Tamar Pedersen 16 Jan '19

16 Jan '19

Hello, I am evaluating stunnel, to see if it is a viable solution for providing encryption in a system that contains an Atmel processor which includes a HW accelerated encryption block. I am just ramping up on stunnel, and figured I should capture what I have done so far. My questions will come towards the end of my email. My research indicates that stunnel incorporates openssl. I have been able to use openssl independently, to access the cryptodev HW encryption engine, in the Linux kernel module located in /lib/modules/4.14.79/extra/cryptodev.ko. When openssl is run without accessing the cryptodev engine (cryptodev module not loaded), I get the pure SW encryption implementation provided by default in openssl. When I run bench mark speed tests using openssl, using SW encryption, I see the following results: # time -v openssl speed -evp aes-128-cbc Doing aes-128-cbc for 3s on 16 size blocks: 1689887 aes-128-cbc's in 2.95s Doing aes-128-cbc for 3s on 64 size blocks: 568389 aes-128-cbc's in 2.95s Doing aes-128-cbc for 3s on 256 size blocks: 151550 aes-128-cbc's in 2.96s Doing aes-128-cbc for 3s on 1024 size blocks: 38599 aes-128-cbc's in 2.96s Doing aes-128-cbc for 3s on 8192 size blocks: 4845 aes-128-cbc's in 2.95s OpenSSL 1.0.2p-fips 14 Aug 2018 built on: reproducible build, date unspecified options:bn(64,32) rc4(ptr,char) des(idx,cisc,16,long) aes(partial) idea(int) blowfish(ptr) compiler: arm-laird-linux-gnueabi-gcc -I. -I.. -I../include -fPIC -DOPENSSL_PIC -DZLIB_SHARED -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -DHAVE_CRYPTODEV -DUSE_CRYPTODEV_DIGESTS -Wall -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -I/home/sii/wb50n_space2_legacy_6.0.0.x/wb/buildroot/output/wb50n_space2_legacy/host/arm-buildroot-linux-gnueabi/sysroot/usr/local/ssl/fips-2.0/include -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DAES_ASM -DBSAES_ASM -DGHASH_ASM The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 9165.49k 12331.15k 13107.03k 13353.17k 13454.32k Command being timed: "openssl speed -evp aes-128-cbc" User time (seconds): 14.81 System time (seconds): 0.10 Percent of CPU this job got: 99% Elapsed (wall clock) time (h:mm:ss or m:ss): 0m 15.06s Average shared text size (kbytes): 0 Average unshared data size (kbytes): 0 Average stack size (kbytes): 0 Average total size (kbytes): 0 Maximum resident set size (kbytes): 13376 Average resident set size (kbytes): 0 Major (requiring I/O) page faults: 0 Minor (reclaiming a frame) page faults: 145 Voluntary context switches: 0 Involuntary context switches: 721 Swaps: 0 File system inputs: 0 File system outputs: 0 Socket messages sent: 0 Socket messages received: 0 Signals delivered: 0 Page size (bytes): 4096 Exit status: 0 # When I load the cryptodev module, and take advantage of the accelerated hardware encryption the benchmark tests are significantly faster. Here is what those results look like. # modprobe cryptodev # time -v openssl speed -evp aes-128-cbc Doing aes-128-cbc for 3s on 16 size blocks: 44163 aes-128-cbc's in 0.12s Doing aes-128-cbc for 3s on 64 size blocks: 31345 aes-128-cbc's in 0.15s Doing aes-128-cbc for 3s on 256 size blocks: 18923 aes-128-cbc's in 0.11s Doing aes-128-cbc for 3s on 1024 size blocks: 13847 aes-128-cbc's in 0.13s Doing aes-128-cbc for 3s on 8192 size blocks: 8427 aes-128-cbc's in 0.06s OpenSSL 1.0.2p-fips 14 Aug 2018 built on: reproducible build, date unspecified options:bn(64,32) rc4(ptr,char) des(idx,cisc,16,long) aes(partial) idea(int) blowfish(ptr) compiler: arm-laird-linux-gnueabi-gcc -I. -I.. -I../include -fPIC -DOPENSSL_PIC -DZLIB_SHARED -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -DHAVE_CRYPTODEV -DUSE_CRYPTODEV_DIGESTS -Wall -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -I/home/sii/wb50n_space2_legacy_6.0.0.x/wb/buildroot/output/wb50n_space2_legacy/host/arm-buildroot-linux-gnueabi/sysroot/usr/local/ssl/fips-2.0/include -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DAES_ASM -DBSAES_ASM -DGHASH_ASM The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 5888.40k 13373.87k 44038.98k 109071.75k 1150566.40k Command being timed: "openssl speed -evp aes-128-cbc" User time (seconds): 0.59 System time (seconds): 8.72 Percent of CPU this job got: 61% Elapsed (wall clock) time (h:mm:ss or m:ss): 0m 15.11s Average shared text size (kbytes): 0 Average unshared data size (kbytes): 0 Average stack size (kbytes): 0 Average total size (kbytes): 0 Maximum resident set size (kbytes): 13792 Average resident set size (kbytes): 0 Major (requiring I/O) page faults: 0 Minor (reclaiming a frame) page faults: 144 Voluntary context switches: 41154 Involuntary context switches: 3321 Swaps: 0 File system inputs: 0 File system outputs: 0 Socket messages sent: 0 Socket messages received: 0 Signals delivered: 0 Page size (bytes): 4096 Exit status: 0 # As can be seen in the results (hi-lighted in red), the average speed to do aes-128-cbc encryption jumped from around 2.95 s to 0.10 s. Also of interest is the context switches are significantly higher when running hardware encryption, because of interrupts and overhead to use the hardware engine. I can also look at /proc/interrupts and see significant increases in atmel-aes interrupt counts when using the cryptodev HW acceleration encryption engine. This gives a good indication that the cryptodev module is in use, and is doing encryption. I would like to try to figure out how to allow stunnel to take advantage of the cryptodev HW acceleration encryption engine available in openssl. I have made some attempts, but so far, I have not been able to determine if stunnel is successfully using the cryptodev engine. Here is what I have done with stunnel. I already have a client and server successfully communicating with each other using stunnel. To verify this I used the "nc" utility to send characters back and forth between two different machines. The stunnel.conf file, on the server, is out of the box. I'm interested in encrypting on the client side. Here is my current client.conf file, in /etc/stunnel: # cat client.conf debug = 7 output = /tmp/stunnel-server.log pid = /tmp/stunnel.pid engine = cryptodev [test] verify = 1 client = yes accept = 127.0.0.1:2000 connect = 192.168.0.220:30000 CAfile = /etc/stunnel/certificate.crt engineNum = 1 # I am attempting to set up the cryptodev to be the configured engine for the client. I am able to start stunnel, using client.conf, as follows: # stunnel /etc/stunnel/client.conf # If I do a "ps" command to display processes, I can see that stunnel is running in the background. At this point, I can use "nc" to send data, as follows: # nc 127.0.0.1 2000 < /tmp/long_file.txt I am able to see the text from long_file.txt on the server, which is also running nc. The problem is that I don't see interrupts increasing in /proc/interrupts, which leaves me wondering if I have not configured stunnel correctly to use the cryptodev engine. If I try to remove the cryptodev module as this point, while stunnel is running, I receive a message that it is in use, as follows: # modprobe -r cryptodev modprobe: FATAL: Module cryptodev is in use. # If I kill the stunnel process, I am able to successfully remove the cryptodev module, which seems to suggest stunnel is the process using the cryptodev module. Also, once I have removed the cryptodev module, I can't restart stunnel. Instead, I get the following errors back: # stunnel /etc/stunnel/client.conf [.] stunnel 5.44 on arm-buildroot-linux-gnueabi platform [.] Compiled/running with OpenSSL 1.0.2p-fips 14 Aug 2018 [.] Threading:FORK Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI [ ] errno: (*__errno_location ()) [.] Reading configuration from file /etc/stunnel/client.conf [.] UTF-8 byte order mark not detected [ ] Enabling support for engine "cryptodev" [!] error queue: 2606A074: error:2606A074:engine routines:ENGINE_by_id:no such engine [!] error queue: 260B6084: error:260B6084:engine routines:DYNAMIC_LOAD:dso not found [!] error queue: 25070067: error:25070067:DSO support routines:DSO_load:could not load the shared library [!] ENGINE_by_id: 25066067: error:25066067:DSO support routines:DLFCN_LOAD:could not load the shared library [!] /etc/stunnel/client.conf:5: "engine = cryptodev": Failed to open the engine # Again, this suggests stunnel is trying to use cryptodev. I just don't know how to prove I am taking advantage of the HW encryption acceleration engine. I never see interrupts updating in /proc/interrupts when using nc, while stunnel is running. So, here are my questions: 1.) Does it look like I have things set up correctly in client.conf, to use the cryptodev engine? 2.) If client.conf is correct, how can I prove that stunnel is using the cryptodev engine, since I don't see the expected interrupts? One idea is that the cryptodev module might not support the type of encryption being requested by the certificate, so openssl falls back to the pure SW encryption implementation. I know the Atmel chip in question supports the following: # openssl engine -t -c (cryptodev) cryptodev engine [RSA, DSA, DH, DES-CBC, DES-EDE3-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC, MD5, SHA1, SHA256, SHA384, SHA512] [ available ] (dynamic) Dynamic engine loading support [ unavailable ] # I was able to decode the contents of the certificate, and it says it is sha256WithRSAEncryption. My engine supports SHA256 and RSA, but does it support combining, like SHA256WithRSA? I'm not sure. I'll keep chasing that one. Thanks for any guidance on how to use the cryptodev in stunnel. Regards, Tamar

1 0

Stunnel in transparent mode
by Luis Monteiro 15 Jan '19

15 Jan '19

Hi fellows. I´m from Brazil and I´m trying to use Stunnel as a TLS proxy in a bed test environment. I´m using a traffic generator from Ixia (Breakingpoint). The bed test is: |-------------------| 6.0.0.1 |-------------------|9.0.0.1 9.0.0.2|--------------------|7.0.0.2 |--------------------| | Client 6.0.0.2 |>>>>>>>>>>>>| Stunnel Client|>>>>>>>>>>>>>>>>>>| Stunnel Server|>>>>>>>>>>>>>>>>>> | Server 7.0.0.2 | |-------------------| ens224 |-------------------|ens192 ens224|--------------------|ens192 |--------------------| I´m capturing the packets in all 3 points so I can see exactly what is happening. I tested without transparent proxy and worked fine. I test with transparent = source with the additional conf bellow in both Stunnel and worked fine as well. iptables -t mangle -N DIVERT iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT iptables -t mangle -A DIVERT -j MARK --set-mark 1 iptables -t mangle -A DIVERT -j ACCEPT ip rule add fwmark 1 lookup 100 ip route add local 0.0.0.0/0 dev lo table 100 echo 0 >/proc/sys/net/ipv4/conf/lo/rp_filter iptables -t nat -A PREROUTING -i ens224 -p tcp --dport 80 -j DNAT --to-destination 6.0.0.1:8080 I tested transparent = destination with several modification from the config bellow without success. No conf delivery packets with 7.0.0.2:443 on the Stunnel Client ens192 via 9.0.0.1 to be accept on Stunnel server 9.0.0.2:443. /sbin/iptables -I INPUT -i ens192 -p tcp --dport 8080 -j ACCEPT /sbin/iptables -t nat -I PREROUTING -p tcp --dport 443 \ -i ens192 -j DNAT --to-destination 9.0.0.1:443 Any help to show me what is wrong would be appreciated. Thanks in advanced, Luis Monteiro

1 0

Re: [stunnel-users] No more addresses to connect
by Eric Eberhard 14 Jan '19

14 Jan '19

Could be the versions of communication are different – from SSLv3 to TLS1.3 … Having said that, there is NO REASON to use stunnel and a VPN – both encrypt data. You only need to encrypt it once … so I’d change your software to behave differently via VPN or not. Eric From: stunnel-users [mailto:stunnel-users-bounces@stunnel.org] On Behalf Of Ben Habel Sent: Monday, January 07, 2019 7:32 PM To: stunnel-users(a)stunnel.org Subject: [stunnel-users] No more addresses to connect I am trying to implement an openvpn + stunnel vpn with a Linux host server and a windows client, i have everything connecting when alone but when I connect openvpn over Stunnel i get and error that says: 2019.01.07 21:18:50 LOG5[0]: Service [openvpn] accepted connection from 127.0.0.1:49343 <http://127.0.0.1:49343> 2019.01.07 21:19:15 LOG5[1]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2019.01.07 21:19:20 LOG5[2]: Service [openvpn] accepted connection from 127.0.0.1:49380 <http://127.0.0.1:49380> 2019.01.07 21:19:30 LOG3[2]: s_connect: s_poll_wait 74.215.118.189:1194 <http://74.215.118.189:1194> : TIMEOUTconnect exceeded 2019.01.07 21:19:30 LOG3[2]: No more addresses to connect And this error will loop until I disable the openvpn connection. Any help would be appreciated. Thanks

2 1

Re: [stunnel-users] older browsers, stunnel and privoxy
by Eric Eberhard 14 Jan '19

14 Jan '19

Sure it can. Inetd is simply a "server" and stunnel works in inetd mode or server mode. When not using inetd, stunnel does the server work. When using inetd then inetd does the server work. In both cases the actual "instance" of stunnel is the same. And inetd always works (or essentially Unix does not). It is milliseconds slower in inetd (and unless you are doing millions of connections nobody will notice) but way more reliable in my experience. Eric -----Original Message----- From: stunnel-users [mailto:stunnel-users-bounces@stunnel.org] On Behalf Of Peter Pentchev Sent: Friday, January 04, 2019 8:06 AM To: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] older browsers, stunnel and privoxy On Thu, Jan 03, 2019 at 02:45:30PM -0700, Eric Eberhard wrote: > Observation: you accept on port 80 ... the log says 4121 ... any > chance you have some sort of port forwarding/NAT/firewall/router issue? Just for the record (I already answered the question in another message), the log says that the client - the program that was talking to stunnel, presumably some kind of web browser - connected *to* stunnel *from* the (ephemeral) port 4121. > Second -- if you are on Unix why not just use inetd? Easy, reliable, > simple, always works (if inetd goes down you have no Unix). And you > have nothing to manage -- just logs to look at. The inetd and stunnel tools serve different purposes - inetd cannot, by itself, proxy between a plaintext and a TLS/SSL connection. > Happy New Year > > Eric Same! G'luck, Peter > -----Original Message----- > From: stunnel-users [mailto:stunnel-users-bounces@stunnel.org] On > Behalf Of kovacs janos > Sent: Saturday, December 29, 2018 7:37 PM > To: Javier <jamilist.stn(a)gmx.es> > Cc: stunnel-users(a)stunnel.org > Subject: Re: [stunnel-users] older browsers, stunnel and privoxy > > it still doesnt seem to work. i tried it with deviantart.com again. > configuration: > client = yes > accept = 127.0.0.1:80 > connect = 52.85.220.247:443 > verifyChain = yes > CAfile = ca-certs.pem > checkHost = *.deviantart.com > > the name after checkHost is the "Common Name" displayed when viewing the site's certificate in a browser(lock icon, view certificate). i also saved the certificate in case i would need to try the "certificate pinning" method. the connect IP is what 'get-site-ip.com' > says the IP of the website is. > > these are the logs: > Service [fbsd-www] accepted connection from 127.0.0.1:4121 > s_connect: connected 52.85.220.247:443 Service [fbsd-www] connected > remote server from 192.168.0.3:4122 > SSL_connect: 14077410: error:14077410:SSL > routines:SSL23_GET_SERVER_HELLO:sslv3 alert handshake failure > Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket > > i know i pestered everyone long enough, but i still havent been able > to connect to anything. without any verification its the same > > On 12/21/18, Javier <jamilist.stn(a)gmx.es> wrote: > > On Fri, 21 Dec 2018 13:58:35 +0200 > > Peter Pentchev <roam(a)ringlet.net> wrote: > > > >> Hm, there's no reason why stunnel would not work like that for a > >> predetermined set of hosts with known addresses. > > > > Hi, > > > > I'm just trying to avoid encouraging him on keep with his first idea > > of browsing through Stunnel, with, or without privoxy. > > > > Of course one site, one connection would work, if we forget about > > secondary issues and..., nevermind... > > > > I give up :D > > > > Regards. > > > > > > _______________________________________________ > > stunnel-users mailing list > > stunnel-users(a)stunnel.org > > https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users > > > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)stunnel.org > https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users > > > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)stunnel.org > https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users -- -- Peter Pentchev roam(a){ringlet.net,debian.org,FreeBSD.org} pp(a)storpool.com PGP key: http://people.FreeBSD.org/~roam/roam.key.asc Key fingerprint 2EE7 A7A5 17FC 124C F115 C354 651E EFB0 2527 DF13

1 0

Could stunnel encryption be responsible for rendering the year as "4019" instead of "2019"?
by Al Birchall 09 Jan '19

09 Jan '19

Hi All, This may be stupid question, but I'll pose it anyway! We use stunnel to encrypt communications between library self-service kiosks and a cloud-based library system. Since switching to this cloud-based library system, the self-service kiosks have been rendering the year in item due dates as "4019" instead of "2019" printed and emailed patron library account statements. Items will actually have been checked out to the correct due date in library system, with the year displayed correctly, which library staff and patrons can see is so when they access the system directly. We have fixed the problem with a work-around by configuring the kiosk software to only display the last two digits of the year. So could it be the stunnel encryption algorithms that are causing "2019" to display as "4019"? Many thanks! Alex Alex Birchall Library Systems Manager The Sheppard Library Middlesex University London NW4 4BT UK Tel: +44 (0)20 8411 5235 Mob: 07765 237 570

2 1

Internal Errors
by _ Ånüßås _ 08 Jan '19

08 Jan '19

Hello, I would like to report two bugs. I recently upgraded to stunnel 5.50 on FreeBSD 12.0 and noticed that the stunnel server service now crashes periodically. When checking the logs after a crash, I see the following error: INTERNAL ERROR: Dead canary at /usr/src/crypto/openssl/ssl/statem/extensions_sr The stunnel server service only ever talks to a stunnel client service, also running version 5.50 on FreeBSD 12.0. The server configuration is as follows. Anything in {} brackets has been redacted. I have seen this issue on multiple servers configured the same way. <config> client = no setuid = stunnel setgid = stunnel pid = {/path/to/file} output = {/path/to/file} debug = 4 socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [server] accept = {ip}:{port} connect = {ip}:{port} ciphers = PSK PSKsecrets = {/path/to/file} </config> Additionally, I have noticed another error in the logs. Although it appears far more frequently than the error above, it does not seem to cause the server service to crash. INTERNAL ERROR: Double free attempt: ptr=0x802119050 alloc=/usr/src/crypto/openssl/crypto/stack/stack.c:198 free#1=/usr/src/crypto/openssl/crypto/stack/stack.c:376 free#2=/usr/src/crypto/openssl/ssl/ssl_sess.c:814 Please let me know if additional information is needed to fix these bugs. Thank you.

1 0

No more addresses to connect
by Ben Habel 08 Jan '19

08 Jan '19

I am trying to implement an openvpn + stunnel vpn with a Linux host server and a windows client, i have everything connecting when alone but when I connect openvpn over Stunnel i get and error that says: 2019.01.07 21:18:50 LOG5[0]: Service [openvpn] accepted connection from 127.0.0.1:49343 2019.01.07 21:19:15 LOG5[1]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket 2019.01.07 21:19:20 LOG5[2]: Service [openvpn] accepted connection from 127.0.0.1:49380 2019.01.07 21:19:30 LOG3[2]: s_connect: s_poll_wait xx.xxx.xxx.xxx:1194: TIMEOUTconnect exceeded 2019.01.07 21:19:30 LOG3[2]: No more addresses to connect And this error will loop until I disable the openvpn connection. Any help would be appreciated. Thanks

2 1

Need help to confi Stunnel
by Larry Alba 08 Jan '19

08 Jan '19

I need help to configure Stunnel to work again for my Secure Email being sent by my NoteSmith software thru Aplus.net mail server. I am: larryalba(a)yahoo.com Sent from Yahoo Mail on Android

1 0

ssl3_get_record:wrong version number
by Moellers 07 Jan '19

07 Jan '19

Hello, what I´m trying to accomplish is to build a secure RDP Connection between my Laptop and a Server, which are in the same Network but as RDP in itself is not secure enough I need the stunnel encryption. As of now I can establish a connection but as soon as I try to start an RDP Connection I get the following message: SSL_accept: 1408F10B: error:1408F10B:SSL routines:ssl3_get_record:wrong version number I tried serveral things for example: sslVersion = all options = NO_SSLv2 Sadly this doesn´t work either as I get a different error after that. This is pretty much the config for both Server and Client. ; R.B. Konfiguration HMailServer InvNr. 4522 RDP Zugriff mit STunnel-Verschlüsselung [RDP-SSL] CAfile = certs.pem accept = 9000 connect = 3389 ;verify = 4 verifyPeer = yes verifyChain = no sslVersion = all cert = stunnel.pem I exchanged the certificates between the Server and the Laptop but can´t establish a connection to get a RDP Session going. Hope someone can help me. Kind regards. F.Moellers Mit freundlichen Grüßen IT-Abteilung Jugendhilfe Köln e.V. Christianstr. 82 50825 Köln Tel. (0221) 54600-177 <mailto:it@jugendhilfe-koeln.de> it(a)jugendhilfe-koeln.de <http://www.jugendhilfe-koeln.de> www.jugendhilfe-koeln.de Geschäftsführerin: Almut Gross - Amtsgericht Köln VR 7348 Vorstandsvorsitzende: Dr. Agnes Klein

2 1

Re: [stunnel-users] older browsers, stunnel and privoxy
by Eric Eberhard 04 Jan '19

04 Jan '19

Observation: you accept on port 80 ... the log says 4121 ... any chance you have some sort of port forwarding/NAT/firewall/router issue? Second -- if you are on Unix why not just use inetd? Easy, reliable, simple, always works (if inetd goes down you have no Unix). And you have nothing to manage -- just logs to look at. Happy New Year Eric -----Original Message----- From: stunnel-users [mailto:stunnel-users-bounces@stunnel.org] On Behalf Of kovacs janos Sent: Saturday, December 29, 2018 7:37 PM To: Javier <jamilist.stn(a)gmx.es> Cc: stunnel-users(a)stunnel.org Subject: Re: [stunnel-users] older browsers, stunnel and privoxy it still doesnt seem to work. i tried it with deviantart.com again. configuration: client = yes accept = 127.0.0.1:80 connect = 52.85.220.247:443 verifyChain = yes CAfile = ca-certs.pem checkHost = *.deviantart.com the name after checkHost is the "Common Name" displayed when viewing the site's certificate in a browser(lock icon, view certificate). i also saved the certificate in case i would need to try the "certificate pinning" method. the connect IP is what 'get-site-ip.com' says the IP of the website is. these are the logs: Service [fbsd-www] accepted connection from 127.0.0.1:4121 s_connect: connected 52.85.220.247:443 Service [fbsd-www] connected remote server from 192.168.0.3:4122 SSL_connect: 14077410: error:14077410:SSL routines:SSL23_GET_SERVER_HELLO:sslv3 alert handshake failure Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket i know i pestered everyone long enough, but i still havent been able to connect to anything. without any verification its the same On 12/21/18, Javier <jamilist.stn(a)gmx.es> wrote: > On Fri, 21 Dec 2018 13:58:35 +0200 > Peter Pentchev <roam(a)ringlet.net> wrote: > >> Hm, there's no reason why stunnel would not work like that for a >> predetermined set of hosts with known addresses. > > Hi, > > I'm just trying to avoid encouraging him on keep with his first idea > of browsing through Stunnel, with, or without privoxy. > > Of course one site, one connection would work, if we forget about > secondary issues and..., nevermind... > > I give up :D > > Regards. > > > _______________________________________________ > stunnel-users mailing list > stunnel-users(a)stunnel.org > https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users > _______________________________________________ stunnel-users mailing list stunnel-users(a)stunnel.org https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users

2 1

stunnel not working properly on Redhat linux (fresh install)
by Klaus Kloeser 04 Jan '19

04 Jan '19

Hi, I have set up Stunnel as SSL Wrapper for googlemail on a Redhat Enterprise Linux 7.2 installation. The stunnel.conf: output = /var/log/stunnel.log cert = /etc/pki/tls/certs/2019stunnel.pem client = yes sslVersion = TLSv1 ;fips=no [ssmtp] accept = 1925 connect=smtp.googlemail.com:587 lets me start stunned well. I have created the file 2019stunnel.pem following the Instructions on Redhat: make 2019stunnel.pem in the correct directory (certs) now I tried to telnet localhost 1925; I get a “connected”, but nothing more. telnet smtp.googlemail 587 runs very well, I get connected, so I assume it is not a firewall issue. I checked the options sslVersion = TLSv1 and sslVersion = all alternatively, which led to different errors in stunnel.log: Service [ssmtp] accepted connection from 127.0.0.1:49723 2019.01.04 14:45:01 LOG3[4500:140416608397056]: connect_blocking: connect 2a00:1450:400c:c0c::10:587: Network is unreachable (101) 2019.01.04 14:45:01 LOG5[4500:140416608397056]: connect_blocking: connected 74.125.140.16:587 2019.01.04 14:45:01 LOG5[4500:140416608397056]: Service [ssmtp] connected remote server from 192.168.178.57:44246 2019.01.04 14:45:01 LOG3[4500:140416608397056]: SSL_connect: 140770FC: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol 2019.01.04 14:45:01 LOG5[4500:140416608397056]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2019.01.04 14:54:24 LOG5[4500:140416608249920]: Terminated or Service [ssmtp] accepted connection from 192.168.178.57:57612 2019.01.04 14:54:36 LOG5[7437:139957105055488]: connect_blocking: connected 173.194.76.16:587 2019.01.04 14:54:36 LOG5[7437:139957105055488]: Service [ssmtp] connected remote server from 192.168.178.57:52192 2019.01.04 14:54:36 LOG3[7437:139957105055488]: SSL_connect: 1408F10B: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number 2019.01.04 14:54:36 LOG5[7437:139957105055488]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket Now Open SSL: Openssl output: openssl s_client -connect localhost:1925 CONNECTED(00000003) write:errno=104 no peer certificate available No client certificate CA names sent SSL handshake has read 0 bytes and written 289 bytes New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE No ALPN negotiated SSL-Session: Protocol : TLSv1.2 Cipher : 0000 Session-ID: Session-ID-ctx: Master-Key: Key-Arg : None Krb5 Principal: None PSK identity: None PSK identity hint: None Start Time: 1546610402 Timeout : 300 (sec) Verify return code: 0 (ok) What do I miss here; what is running wrong ? Mit freundlichen Grüßen/ best regards Klaus Klöser

2 1

(no subject)
by Guido 30 Dec '18

30 Dec '18

Gesendet von Mail für Windows 10

1 0

(no subject)
by Guido 30 Dec '18

30 Dec '18

Gesendet von Mail für Windows 10

1 0

sslv3 alert bad certificate
by marko 26 Dec '18

26 Dec '18

Hello all, I'm using xmas for something useful - i.e. to configure a new server. After an install of stunnel 5.50 and generating the .pem and .key files with: openssl req -new -x509 -nodes -out /usr/local/etc/stunnel/nw_stunnel.pem -keyout /usr/local/etc/stunnel/nw_stunnel.key -days 1825 using this settings in the stunnel.conf: cert = /usr/local/etc/stunnel/nw_stunnel.pem key = /usr/local/etc/stunnel/nw_stunnel.key options = -NO_SSLv3 sslVersion = all I got LOG5[0]: Service [imaps] accepted connection from 192.168.1.3:64233 Dec LOG3[0]: SSL_accept: 14094412: error:14094412:SSL routines:ssl3_read_bytes:sslv3 alert bad certificate LOG5[0]: Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket Just wondering: this is a self issued CA-Cert. Does the bad certificate error refer to the unsafe ssl3-standard or is it a placeholder for the certificate being self-generated as well? I'm currentlty on [.] stunnel 5.50 on amd64-portbld-freebsd12.0 platform [.] Compiled/running with OpenSSL 1.1.1a-freebsd 20 Nov 2018 [.] Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,OCSP,PSK,SNI This configuration works with the same install procedure: [.] stunnel 5.49 on i386-portbld-freebsd11.2 platform [.] Compiled/running with OpenSSL 1.0.2o-freebsd 27 Mar 2018 [.] Threading:PTHREAD Sockets:POLL,IPv4 TLS:ENGINE,OCSP,PSK,SNI Any insights into this matter are highly welcome. Cheers, and merry youknowwhat, Marko

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users