- stunnel-users - stunnel.org

Radius over Stunnel??
by Frazer, Andrew non Unisys 08 Mar '05

08 Mar '05

Hello all.. I would like to pass radius over stunnel, but I'm not sure if this will work... I have a lot of 'client's that are using RADIUS for authentication, but i want to pass the data over the internet, and radius is relatively insecure. My client machines also run a web server, which stunnel sits in front of, to provide ssl encrypted web services. My radius servers can easily run stunnel, without any issue. Could someone suggest a configuration for this??

3 2

syslog question
by Brian T 04 Mar '05

04 Mar '05

If debug=4 ( or not 0 ) and output= is commented in an stunnel config, it looks like in server mode, messages goto syslog. But in client mode, nothing goes to syslog. Is this the way it's supposed to be? -Brian

1 0

Re: [stunnel-users] long delay to close the ssl session ?
by ikeda＠areabe 04 Mar '05

04 Mar '05

If TIMEOUTclose value is positive, stunnel does not transmit TCP FIN, even though application sends TCP FIN, until timeout time expires I don't know why stunnel designer chose it, maybe because of the performance, or some others. Some of the browsers do not start to display the page until receiving the entire packet. And one of the trigger for the browser to detect to receive the whole is TCP FIN. From that things, such kind of the problem of yours occurs. regards taka On Fri, 4 Mar 2005 10:39:47 -0800 (PST), gary ng <garyng2000(a)yahoo.com> wrote: > Thanks, that did the trick. Just wonder why the > document said this is needed for MSIE while I was > using firefox. Seems to be more like a Window(I > believe even firefox relis on the underlying socket > library) than simply MSIE. > > --- "ikeda@areabe" <ikeda(a)areabe.com> wrote: >> add >> TIMEOUTclose = 0 >> in stunnel.conf >> >> regards >> taka >> >> > > > > > __________________________________ > Celebrate Yahoo!'s 10th Birthday! > Yahoo! Netrospective: 100 Moments of the Web > http://birthday.yahoo.com/netrospective/ >

1 0

long delay to close the ssl session ?
by gary ng 04 Mar '05

04 Mar '05

Hi, I am using stunnel to wrap SSL around SWAT. Everything works fine except that it takes a very long delay for the browser to see that the page has already been transmitted completely(in other words, the other end has closed). I observed this behaviour with both 3.x and 4.x stunnel. Looking through the log, I see that it takes exactly one minute from the start of the session till the session is closed, seems to be some parameter within stunnel to hold the session. I tried both inetd as well as stand alone stunnel mode and both behave the same as well. Is this an issue with SWAT or stunnel ? If I just use plain SWAT through inetd, I don't see this behaviour. thanks for any help in advance. gary __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

compilation errors
by Greg Matthews 03 Mar '05

03 Mar '05

Anyone here managed to build stunnel for Irix? it seems socklen_t is undefined as a type on this OS (and also older versions of solaris). I have found a possible solution here: http://sprg.ssl.berkeley.edu/~fastops/ITOS/portable/socklen$_t.html but I need to know what type this identifier is supposed to be. any help? GREG -- Greg Matthews iTSS Wallingford 01491 692445

2 4

Naive question: will stunnel connect dynamically?
by Duncan Murdoch 02 Mar '05

02 Mar '05

I currently use openssh to open a tunnel between my laptop and my POP3 server, but the tunnel keeps locking up. (I think it's a server problem, or an intermittent line problem, because it happens with both openssh and Putty.) What I'd like is a program that would open the tunnel only as needed, so I can get the mail, and let the tunnel close. Can stunnel do this? More generally, is there a quick summary somewhere on the relative benefits of stunnel's use of SSL versus an SSH approach? Duncan Murdoch

1 0

Windows XP Pro as a client of Remote Dekstop via stunnel
by Jacek Baszkiewicz 02 Mar '05

02 Mar '05

Hi! I'm currently working (without success) on such problem: I have to connect via Stunnel to Windows Server Remote Desktop from workstation with Windows XP Proffesional. When I refer to the local port handled by stunnel, Windows doesn't let me go go further, because it thinks that I'm trying to use local Remote Dekstop and prints: "You are already connected to this machine" (there can be only one connection through RD) . Is there any workaround for this problem, namely, to use secure connection via Stunnel to Remote Dekstop on XP Pro client? This is my config: client=yes cert = stunnel.pem [ts] accept=localhost:3389 connect=remote_ip:443

5 4

PEM routines:PEM_read_bio Problem
by Metal Gear 02 Mar '05

02 Mar '05

Hi all, i was configuring my syslog-ng server with stunnel and it worked fine for somedays but after that i upgraded to new SSL libraries (OpenSSL 0.9.7e) from (OpenSSL 0x0090701f) then i m getting this "stunnel[2480]: SSL_CTX_use_RSAPrivateKey_file: 906D06C: error:0906D06C:PEM routines:PEM_read_bio" error (i have given the link of stunnel binary in rc.local, to start at boot time, at i get this error in logs) i m using stunnel (stunnel 4.07). Can anyone has any idea about it. Thanks

1 0

verify = 3 error with certificate client
by Humberto Morell 01 Mar '05

01 Mar '05

Hello List I have stunnel 4.7 In the messages of the list I have not seen solution to my problem. This is VERIFY ERROR ONLY MY: no cert stunnel.log in Server ################## 2005.02.25 07:55:07 LOG5[2501:1076546480]: VERIFY OK: depth=1, /C=CU/ST=Ciudad Habana/L=Centro Habana/O=Segurmatica/OU=Agencia de Certificacion/CN=Segurmatica/emailAddress=ca(a)segurmatica.cu 2005.02.25 07:55:07 LOG4[2501:1076546480]: VERIFY ERROR ONLY MY: no cert for /C=CU/ST=Ciudad Habana/L=Centro Habana/O=Ministerio Informatica y Comunicaciones/OU=Segurmatica/CN=Humberto Morell/emailAddress=morell(a)seg.inf.cu 2005.02.25 07:55:07 LOG7[2501:1076546480]: SSL alert (write): fatal: certificate unknown ############# stunnel.conf in Server ############## #chroot = /var/lib/stunnel/ verify = 3 CApath = /etc/stunnel/certdb # or simply use CAfile instead: #CAfile = /etc/stunnel/certs.pem CAfile = /etc/stunnel/acsegurmatica.crt #cert = /etc/stunnel/stunnel.pem cert = /etc/stunnel/certstunnel.pem ################# File in /etc/stunnel ############### certdb morell.pem stunnel.prueba.pem certstunnel.pem stunnel.conf acsegurmatica.crt morell.crt stunnel.log certclient morell.key stunnel.pem ############### Link in /etc/stunnel/certdb ############### drwxr-xr-x 2 root root 176 Feb 25 11:06 . drwx------ 4 root root 472 Feb 25 10:52 .. lrwxrwxrwx 1 root root 24 Feb 25 11:00 2307a3fe.0 -> /etc/stunnel/stunnel.pem lrwxrwxrwx 1 root root 30 Feb 25 11:01 3f5b7ca8.0 -> /etc/stunnel/acsegurmatica.crt lrwxrwxrwx 1 root root 23 Feb 25 11:03 3fb3183e.0 -> /etc/stunnel/morell.pem lrwxrwxrwx 1 root root 28 Feb 25 11:06 d14abd18.0 -> /etc/stunnel/certstunnel.pem ################# client in Windows stunnel.conf ############## client = yes cert = d:\morell.pem debug = 7 output = d:\stunnel.log [lsd] accept = 9595 connect = 10.10.1.83:9500 [ssh] accept = 2222 connect = 10.10.1.83:9522 ##################### Note: I don't use chroot I have try, but idem error with. File morell.pem only client certificate and other time file morell.pem Key private crl Certificate With verify = 2 all is ok Please help Best regards Morell

3 3

stunnel woes under HPUX 10.20
by foner-stunnel＠media.mit.edu 28 Feb '05

28 Feb '05

[Please keep me CC'ed on replies! I'm not on any stunnel lists.] Stunnel 4.07 and 4.08 don't build under HPUX 10.20. 4.06 appears to build, but doesn't appear to work---with a config file like this, running on the local host: pid = /usr/local/var/stunnel/stunnel.pid client = yes foreground = yes # debug = debug [pop3s] accept = 110 connect = our-pop-host:995 ...and an attempt like this, using (for instance) Emacs 21.4a's movemail: movemail po:foner:localhost NEWMAIL [the-password] ...I get an infinite hang. Enabling debugging causes stunnel to spit out an infinite stream of a single line at maximum rate, and seems unaffected by whether I'm trying to connect to it or not: # stunnel test-stunnel.conf 1900.01.00 00:00:00 LOG5[9738:0]: stunnel 4.06 on hppa1.1-hp-hpux10.20 FORK+POLL with OpenSSL 0.9.7e 25 Oct 2004 1900.01.00 00:00:00 LOG7[9738:0]: Snagged 64 random bytes from /users/foner/.rnd 1900.01.00 00:00:00 LOG7[9738:0]: Wrote 1024 new random bytes to /users/foner/.rnd 1900.01.00 00:00:00 LOG7[9738:0]: RAND_status claims sufficient entropy for the PRNG 1900.01.00 00:00:00 LOG6[9738:0]: PRNG seeded successfully 1900.01.00 00:00:00 LOG6[9738:0]: file ulimit = 60 (can be changed with 'ulimit -n') 1900.01.00 00:00:00 LOG6[9738:0]: poll() used - no FD_SETSIZE limit for file descriptors 1900.01.00 00:00:00 LOG5[9738:0]: 27 clients allowed 1900.01.00 00:00:00 LOG7[9738:0]: FD 3 in non-blocking mode 1900.01.00 00:00:00 LOG7[9738:0]: FD 4 in non-blocking mode 1900.01.00 00:00:00 LOG7[9738:0]: FD 5 in non-blocking mode 1900.01.00 00:00:00 LOG7[9738:0]: SO_REUSEADDR option set on accept socket 1900.01.00 00:00:00 LOG7[9738:0]: pop3s bound to 0.0.0.0:110 1900.01.00 00:00:00 LOG7[9738:0]: Created pid file /usr/local/var/stunnel/stunnel.pid 1900.01.00 00:00:00 LOG6[9738:0]: daemon_loop: s_poll_wait: Invalid argument (22) 1900.01.00 00:00:00 LOG6[9738:0]: daemon_loop: s_poll_wait: Invalid argument (22) 1900.01.00 00:00:00 LOG6[9738:0]: daemon_loop: s_poll_wait: Invalid argument (22) 1900.01.00 00:00:00 LOG6[9738:0]: daemon_loop: s_poll_wait: Invalid argument (22) [ . . . and forever more . . . ] I can't imagine that this is supposed to be how debug works, since it's totally useless for debugging if it spits out the same line as fast as it can. I'm running the stunnel as root, and netstat seems to show that it's bound to port 110, but doesn't seem to indicate any outbound connection from stunnel to our pop host after I invoke movemail. I have no idea if versions before 4.06 work; I haven't tried. Sure, this is an old OS, but zillions of other things, including the entire GNU toolchain, seem to work on it, so stunnel should, too. Builds for all three versions I've tried may be found in at the following URLs. Note that 4.07 and 4.08 fail on different files, but in essentially the same way. http://foner.www.media.mit.edu/people/foner/Sys/stunnel-4.06.build http://foner.www.media.mit.edu/people/foner/Sys/stunnel-4.07.build http://foner.www.media.mit.edu/people/foner/Sys/stunnel-4.08.build I've done some websearching, and I've searched the stunnel archives at mirt.net, but haven't found anything relevant. Any clues? Thanks...

5 9

stunnel logging problem
by Brian T 28 Feb '05

28 Feb '05

Hi, I work for a company which has a custom embedded Linux platform, and have been working with stunnel for some time but have never seen this problem. I have seen it with stunnel 4.04 and 4.07, which is compiled on a Redhat 7.2ish platform, but newer SSL libraries. (below my sig is the stunnel info). Basically I use a config file, but when debug= and output= is commented out, stunnel seems to cause a problem which resets the embedded unit. If I uncomment them both and use output=/var/log/stunnel.log ( or /dev/null ) everything works fine. Not sure where to look for the problem that is causing this since I can't even get a core dump. I looged in s_log() but nothing stuck out as being wrong. Thanks for any help you can lend, -Brian [root@JBMgateway-v63 /]# stunnel -version stunnel 4.07 on i486-pc-linux-gnu PTHREAD+POLL+IPv4+LIBWRAP with OpenSSL 0.9.7d 17 Mar 2004 Global options cert = /etc/stunnel/stunnel.pem ciphers = ALL:!ADH:+RC4:@STRENGTH debug = 5 key = /etc/stunnel/stunnel.pem pid = /var/run/stunnel.pid RNDbytes = 64 RNDfile = /dev/urandom RNDoverwrite = yes session = 300 seconds verify = none Service-level options TIMEOUTbusy = 300 seconds TIMEOUTclose = 60 seconds TIMEOUTconnect = 10 seconds TIMEOUTidle = 43200 seconds [root@JBMgateway-v63 /]# uname -a Linux JBMgateway-v63 2.4.20 #1729 Wed Jan 26 17:38:15 CST 2005 i486 unknown [root@JBMgateway-v63 /]# ls -al /lib/libssl.so.* -rwxr-xr-x 1 root root 210452 Jan 26 18:47 /lib/libssl.so.0.9.7 lrwxrwxrwx 1 root root 20 Jan 26 18:47 /lib/libssl.so.2 -> /lib/libssl.so.0.9.7 [root@JBMgateway-v63 /]# cat /etc/stunnel/stunnel.conf # Some debugging stuff debug = 6 output = /var/log/stunnel.log #output = /dev/null foreground = yes # Use it for client mode client = yes [SampleGroup] accept = 443 connect = x.x.x.x:6660

1 0

PEM routines:PEM_read_bio Problem
by Metal Gear 28 Feb '05

28 Feb '05

Hi all, i was configuring my syslog-ng server with stunnel and it worked fine for somedays but after that i upgraded to new SSL libraries (OpenSSL 0.9.7e) from (OpenSSL 0x0090701f) then i m getting this "stunnel[2480]: SSL_CTX_use_RSAPrivateKey_file: 906D06C: error:0906D06C:PEM routines:PEM_read_bio" error (i have given the link of stunnel binary in rc.local, to start at boot time, at i get this error in logs) i m using stunnel (stunnel 4.07). Can anyone has any idea about it. Thanks (sorry for sending same message twice)

1 0

PEM routines:PEM_read_bio Problem
by Metal Gear 28 Feb '05

28 Feb '05

Hi all, i was configuring my syslog-ng server with stunnel and it worked fine for somedays but after that i upgraded to new SSL libraries (OpenSSL 0.9.7e) from (OpenSSL 0x0090701f) then i m getting this "stunnel[2480]: SSL_CTX_use_RSAPrivateKey_file: 906D06C: error:0906D06C:PEM routines:PEM_read_bio" error (i have given the link of stunnel binary in rc.local, to start at boot time, at i get this error in logs) i m using stunnel (stunnel 4.07). Can anyone has any idea about it. Thanks

1 0

Stunnel 4.08 released
by Michal Trojnara 27 Feb '05

27 Feb '05

Here is the ChangeLog entry for the new stunnel 4.08: Version 4.08, 2005.02.27, urgency: LOW: * New features - New -quiet option was added to install NT service without a message box. * Bugfixes - Using $(DESTDIR) in tools/Makefile.am. - Define NI_NUMERICHOST and NI_NUMERICSERV when needed. - Length of configuration file line increased from 256B to 16KB. - Stunnel sends close_notify when a close_notify is received from SSL peer and all remaining data is sent to SSL peer. - Some fixes for bugs detected by the watchdog. * Release notes - There were many changes in the transfer() function (the main loop). This version should be thoroughly tested before using it in the mission-critical environment. Home page & downloads: http://stunnel.mirt.net/ Best regards, Mike

1 0

Help Needed
by Alexander Lazic 25 Feb '05

25 Feb '05

Hi, i have try to add the X-Forwarded-For Header, based on http://www.stunnel.org/patches/desc/xforwardedfor_jrd.html, into stunnel 4.07, but i don't come to a solution :-( I have try to add i into 'client.c => transfer()'. Please can anybody review the attached Patch and point me to the right way ;-) I'am not shure that i add the 'insert' into the right place :-( Thanx for help ;-)) al ;-)

1 1

verify =3 error with certificate client
by Humberto Morell 25 Feb '05

25 Feb '05

Hello List I have stunnel 4.7 In the messages of the list I have not seen solution to my problem. This is VERIFY ERROR ONLY MY: no cert stunnel.log in Server ################## 2005.02.25 07:55:07 LOG5[2501:1076546480]: VERIFY OK: depth=1, /C=CU/ST=Ciudad Habana/L=Centro Habana/O=Segurmatica/OU=Agencia de Certificacion/CN=Segurmatica/emailAddress=ca(a)segurmatica.cu 2005.02.25 07:55:07 LOG4[2501:1076546480]: VERIFY ERROR ONLY MY: no cert for /C=CU/ST=Ciudad Habana/L=Centro Habana/O=Ministerio Informatica y Comunicaciones/OU=Segurmatica/CN=Humberto Morell/emailAddress=morell(a)seg.inf.cu 2005.02.25 07:55:07 LOG7[2501:1076546480]: SSL alert (write): fatal: certificate unknown ############# stunnel.conf in Server ############## #chroot = /var/lib/stunnel/ verify = 3 CApath = /etc/stunnel/certdb # or simply use CAfile instead: #CAfile = /etc/stunnel/certs.pem CAfile = /etc/stunnel/acsegurmatica.crt #cert = /etc/stunnel/stunnel.pem cert = /etc/stunnel/certstunnel.pem ################# File in /etc/stunnel ############### certdb morell.pem stunnel.prueba.pem certstunnel.pem stunnel.conf acsegurmatica.crt morell.crt stunnel.log certclient morell.key stunnel.pem ############### Link in /etc/stunnel/certdb ############### drwxr-xr-x 2 root root 176 Feb 25 11:06 . drwx------ 4 root root 472 Feb 25 10:52 .. lrwxrwxrwx 1 root root 24 Feb 25 11:00 2307a3fe.0 -> /etc/stunnel/stunnel.pem lrwxrwxrwx 1 root root 30 Feb 25 11:01 3f5b7ca8.0 -> /etc/stunnel/acsegurmatica.crt lrwxrwxrwx 1 root root 23 Feb 25 11:03 3fb3183e.0 -> /etc/stunnel/morell.pem lrwxrwxrwx 1 root root 28 Feb 25 11:06 d14abd18.0 -> /etc/stunnel/certstunnel.pem ################# client in Windows stunnel.conf ############## client = yes cert = d:\morell.pem debug = 7 output = d:\stunnel.log [lsd] accept = 9595 connect = 10.10.1.83:9500 [ssh] accept = 2222 connect = 10.10.1.83:9522 ##################### Note: I don't use chroot I have try, but idem error with. File morell.pem only client certificate and other time file morell.pem Key private crl Certificate With verify = 2 all is ok Please help Best regards Morell

1 0

openssl - generating stunnel.pem - stunnel.cnf
by k-i-r＠web.de 24 Feb '05

24 Feb '05

Using Stunnel under Windows I want to create a certificate (stunnel.pem) with Openssl. According to FAQ the syntax for creating a certificate with Openssl is openssl req -new -x509 -days 365 -nodes -config stunnel.cnf -out stunnel.pem -keyout stunnel.pem I use openssl for windows (as part of apache-windows-http-server) . Where do I get the file stunnel.cnf ? Or is this file not necessary for creating a certificate ? Thanks for help, k.

3 2

Stunnel and configuration
by Bohdan Linda 22 Feb '05

22 Feb '05

Hi all, I have configured stunnel to do the client authetication, but I have some question. I have used following config: cert = /etc/certificates/server.pem - file with signed server cert and key (passwordless) chroot = /var/run/stunnel/ CAfile = /etc/certificates/certs -file where first item is my CA certificate followed by list of all client certificates sgined by my CA. setuid = nobody setgid = nogroup pid = /stunnel.pid verify = 3 This setup is working, but this seems to me very "unlogical". If I create for me "more logic" setup: cert = /etc/certificates/server.pem chroot = /var/run/stunnel/ CAfile = /etc/certificates/CA/cacert.pem - only certificate of my CA CRLfile = /etc/certificates/crls - only certificates signed by my CA I get the following error: 2005.02.22 15:15:10 LOG5[22418:81926]: VERIFY OK: depth=1, /C= ..... 2005.02.22 15:15:10 LOG4[22418:81926]: VERIFY ERROR ONLY MY: no cert for /C= The question is ... why? Why CAfile has to contain all client certificates, when clients certs are not CA? Why I cannot have separate file for CA and separate file for certificates that I want accept? If I do the similar setup in mod_ssl, the configuration works as expected. Anyway, I'am newbie to deploy stunnel, thus I would like to ask you for giving me you opinion of this configuration, caveats and possible enhancements. Thanks for any comments, Bohdan Linda

3 4

SSL_read (ERROR_SYSCALL)
by Passreality 16 Feb '05

16 Feb '05

Hi Im trying to connect using mysql, there are no fw between the 2 boxes. I tested with stunnel 3.x and 4.x but when i use the 4.0.23 mysldb it just wount work. When i use the older db it works. Any ideas on how to solve this error ? /Christian Stunnel 4.07 Kernel 2.4.18 gcc version 3.3.5 (Debian 1:3.3.5-8) mysql Ver 12.22 Distrib 4.0.23 Dist Debian Testing Im using stunnel.pem (default one) Client Log 2005.02.16 15:04:19 LOG7[2147:16384]: mysql accepted FD=10 from 217.212.4.33:40797 2005.02.16 15:04:19 LOG7[2147:16384]: FD 10 in non-blocking mode 2005.02.16 15:04:19 LOG7[2322:49154]: mysql started 2005.02.16 15:04:19 LOG7[2322:49154]: TCP_NODELAY option set on local socket 2005.02.16 15:04:19 LOG5[2322:49154]: mysql connected from 217.212.4.33:40797 2005.02.16 15:04:19 LOG7[2322:49154]: FD 13 in non-blocking mode 2005.02.16 15:04:19 LOG7[2322:49154]: mysql connecting 217.212.4.198:3307 2005.02.16 15:04:19 LOG7[2322:49154]: connect_wait: waiting 10 seconds 2005.02.16 15:04:19 LOG7[2322:49154]: connect_wait: connected 2005.02.16 15:04:19 LOG7[2322:49154]: Remote FD=13 initialized 2005.02.16 15:04:19 LOG7[2322:49154]: TCP_NODELAY option set on remote socket 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): before/connect initialization 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 write client hello A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 read server hello A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 read server certificate A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 read server done A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 write client key exchange A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 write change cipher spec A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 write finished A 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 flush data 2005.02.16 15:04:19 LOG7[2322:49154]: SSL state (connect): SSLv3 read finished A 2005.02.16 15:04:19 LOG7[2322:49154]: 2 items in the session cache 2005.02.16 15:04:19 LOG7[2322:49154]: 3 client connects (SSL_connect()) 2005.02.16 15:04:19 LOG7[2322:49154]: 3 client connects that finished 2005.02.16 15:04:19 LOG7[2322:49154]: 0 client renegotiatations requested 2005.02.16 15:04:19 LOG7[2322:49154]: 0 server connects (SSL_accept()) 2005.02.16 15:04:19 LOG7[2322:49154]: 0 server connects that finished 2005.02.16 15:04:19 LOG7[2322:49154]: 0 server renegotiatiations requested 2005.02.16 15:04:19 LOG7[2322:49154]: 1 session cache hits 2005.02.16 15:04:19 LOG7[2322:49154]: 0 session cache misses 2005.02.16 15:04:19 LOG7[2322:49154]: 0 session cache timeouts 2005.02.16 15:04:19 LOG6[2322:49154]: SSL connected: new session negotiated 2005.02.16 15:04:19 LOG6[2322:49154]: Negotiated ciphers: DES-CBC3-SHA SSLv3 Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1 2005.02.16 15:04:19 LOG3[2322:49154]: SSL_read (ERROR_SYSCALL): Connection reset by peer (104) 2005.02.16 15:04:19 LOG5[2322:49154]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket 2005.02.16 15:04:19 LOG7[2322:49154]: mysql finished (0 left) Server Log 2005.02.16 15:04:51 LOG7[29786:16384]: mysql accepted FD=10 from 217.212.4.33:40798 2005.02.16 15:04:51 LOG7[29786:16384]: FD 10 in non-blocking mode 2005.02.16 15:04:51 LOG7[29814:49154]: mysql started 2005.02.16 15:04:51 LOG7[29814:49154]: TCP_NODELAY option set on local socket 2005.02.16 15:04:51 LOG5[29814:49154]: mysql connected from 217.212.4.33:40798 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): before/accept initialization 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 read client hello A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 write server hello A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 write certificate A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 write server done A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 flush data 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 read client key exchange A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 read finished A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 write change cipher spec A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 write finished A 2005.02.16 15:04:51 LOG7[29814:49154]: SSL state (accept): SSLv3 flush data 2005.02.16 15:04:51 LOG7[29814:49154]: 1 items in the session cache 2005.02.16 15:04:51 LOG7[29814:49154]: 0 client connects (SSL_connect()) 2005.02.16 15:04:51 LOG7[29814:49154]: 0 client connects that finished 2005.02.16 15:04:51 LOG7[29814:49154]: 0 client renegotiatations requested 2005.02.16 15:04:51 LOG7[29814:49154]: 3 server connects (SSL_accept()) 2005.02.16 15:04:51 LOG7[29814:49154]: 3 server connects that finished 2005.02.16 15:04:51 LOG7[29814:49154]: 0 server renegotiatiations requested 2005.02.16 15:04:51 LOG7[29814:49154]: 1 session cache hits 2005.02.16 15:04:51 LOG7[29814:49154]: 0 session cache misses 2005.02.16 15:04:51 LOG7[29814:49154]: 1 session cache timeouts 2005.02.16 15:04:51 LOG6[29814:49154]: SSL accepted: new session negotiated 2005.02.16 15:04:51 LOG6[29814:49154]: Negotiated ciphers: DES-CBC3-SHA SSLv3 Kx=RSA Au=RSA Enc=3DES(168) Mac=SHA1 2005.02.16 15:04:51 LOG7[29814:49154]: FD 13 in non-blocking mode 2005.02.16 15:04:51 LOG7[29814:49154]: mysql connecting 127.0.0.1:3306 2005.02.16 15:04:51 LOG7[29814:49154]: connect_wait: waiting 10 seconds 2005.02.16 15:04:51 LOG3[29814:49154]: connect_wait: getsockopt: Connection refused (111) 2005.02.16 15:04:51 LOG3[29814:49154]: Failed to initialize remote connection 2005.02.16 15:04:51 LOG7[29814:49154]: mysql finished (0 left) __________________________________ Do you Yahoo!? The all-new My Yahoo! - What will yours do? http://my.yahoo.com

1 0

Stunnel on Open-WRT..
by Andrew Frazer 16 Feb '05

16 Feb '05

I have got Stunnel running under Open-wrt, on a Linksys WRT54GS. However I don't seem to be able to get it to run the transparent mode.. (a) is it possible? (b) If the answer is no, would be possible to modifty either open-wrt or stunnel to make it work? Regards A.

1 0

Re: [stunnel-users] read sock return size 0 situation( it cause http web server to wait timeout for long time)
by Michal Trojnara 15 Feb '05

15 Feb '05

On 2005-01-18, at 02:43, Stanley wrote: > 1.In our case, the web server sent TCP fin,ack to stunnel > but the stunnel just sent TCP ack, so it is TCP half close. > 2.The stunnel use read() function that try to read more data from > sock_fd > but return 0(EOF) because TCP half close. > 3.At this moment, the stunnel call SSL_shutdown() function > that sent close_notify alert but a broswer(IE6 or firefox1.0) return > no message. > > I just modify stunnel 4.07 client.c to set sock_wr=0 > that will close TCP connection from stunnel to web server when read() > EOF. I'm NOT going to break SSL protocol in stunnel to support broken SSL clients. Use: TIMEOUTclose = 0 configuration option instead. Best regards, Mike

1 0

multiple stunnel client
by Manila, Dinesh - Contractor 15 Feb '05

15 Feb '05

Hi, I am working in a project, whereas the EMS application need to be secured while communicating with NE. To make it secure, we have decided to go with stunnel and openSSL. I have following questions while using stunnel in my application: 1. I read that stunnel limits the number of clients to be connected to 125. Can I increase this number. If so, by increasing this number, what is the implication in performance of stuunel. 2. Since my EMS is capable of managing more than 1000 NEs, I would want to have multiple stunnel client running on the same workstation. Is this possible to have multiple stuunel process running on the same server. if so, how should my stunnle.conf file look like. I appreciate greatly, If I could get the answers for the above queries. Thanks and Regards, Dinesh Wipro Technologies. Bangalore.

2 1

Multiple listeners with just one instance of Stunnel?
by Michael Zarlenga 15 Feb '05

15 Feb '05

It doesn't seem possible to start 1 instance of Stunnel for multiple accept ports. Judging by the format of the Stunnel configuration file, it seems that I need to 1 instance of Stunnel for each port that accepts connections from the outside world. Is this true?

3 6

HELP!!! Problem uploading files
by Bhavesh Patel 14 Feb '05

14 Feb '05

Hi all, I'm using stunnel verstion 4.05 and openssl 0.9.7d. When trying to upload a large file say 1Meg I always get the following: 2005.01.27 14:30:40 LOG7[72667165:0]: stunnel accepted FD=0 from 136.157.232.120:3372 2005.01.27 14:30:40 LOG7[72667165:0]: FD 0 in non-blocking mode 2005.01.27 14:30:40 LOG7[79306780:0]: stunnel started 2005.01.27 14:30:40 LOG5[79306780:0]: stunnel connected from 136.157.232.120:3372 2005.01.27 14:30:40 LOG7[79306780:0]: SSL state (accept): before/accept initialization 2005.01.27 14:30:40 LOG7[79306780:0]: SSL state (accept): SSLv2 read client hello A 2005.01.27 14:30:40 LOG7[79306780:0]: SSL state (accept): SSLv2 write server hello A 2005.01.27 14:30:40 LOG7[79306780:0]: waitforsocket: FD=0, DIR=read 2005.01.27 14:30:40 LOG7[79306780:0]: waitforsocket: ok 2005.01.27 14:30:40 LOG7[79306780:0]: SSL state (accept): SSLv2 read client master key A 2005.01.27 14:30:40 LOG7[79306780:0]: SSL state (accept): SSLv2 server start encryption 2005.01.27 14:30:40 LOG7[79306780:0]: SSL state (accept): SSLv2 write server verify A 2005.01.27 14:30:40 LOG7[79306780:0]: waitforsocket: FD=0, DIR=read 2005.01.27 14:30:40 LOG7[79306780:0]: waitforsocket: ok 2005.01.27 14:30:40 LOG7[79306780:0]: SSL state (accept): SSLv2 read client finished A 2005.01.27 14:30:40 LOG7[79306780:0]: SSL state (accept): SSLv2 write request certificate A 2005.01.27 14:30:40 LOG7[79306780:0]: SSL state (accept): SSLv2 write server finished A 2005.01.27 14:30:40 LOG7[79306780:0]: 1 items in the session cache 2005.01.27 14:30:40 LOG7[79306780:0]: 0 client connects (SSL_connect()) 2005.01.27 14:30:40 LOG7[79306780:0]: 0 client connects that finished 2005.01.27 14:30:40 LOG7[79306780:0]: 0 client renegotiatations requested 2005.01.27 14:30:40 LOG7[79306780:0]: 1 server connects (SSL_accept()) 2005.01.27 14:30:40 LOG7[79306780:0]: 1 server connects that finished 2005.01.27 14:30:40 LOG7[79306780:0]: 0 server renegotiatiations requested 2005.01.27 14:30:40 LOG7[79306780:0]: 0 session cache hits 2005.01.27 14:30:40 LOG7[79306780:0]: 1 session cache misses 2005.01.27 14:30:40 LOG7[79306780:0]: 0 session cache timeouts 2005.01.27 14:30:40 LOG6[79306780:0]: Negotiated ciphers: DES-CBC3-MD5 SSLv2 Kx=RSA Au=RSA Enc=3DES(168 ) Mac=MD5 2005.01.27 14:30:40 LOG7[79306780:0]: FD 1 in non-blocking mode 2005.01.27 14:30:40 LOG7[79306780:0]: stunnel connecting 127.0.0.1:80 2005.01.27 14:30:40 LOG7[79306780:0]: remote connect #1: EINPROGRESS: retrying 2005.01.27 14:30:40 LOG7[79306780:0]: waitforsocket: FD=1, DIR=write 2005.01.27 14:30:40 LOG7[79306780:0]: waitforsocket: ok 2005.01.27 14:30:40 LOG7[79306780:0]: Remote FD=1 initialized 2005.01.27 14:30:40 LOG7[79306780:0]: SSL_read returned WANT_: retrying 2005.01.27 14:30:40 LOG7[79306780:0]: SSL closed on SSL_write 2005.01.27 14:30:40 LOG5[79306780:0]: Connection closed: 0 bytes sent to SSL, 668 bytes sent to socket 2005.01.27 14:30:40 LOG7[79306780:0]: removing pid file /usr/local/var/run/stunnel.pid 2005.01.27 14:30:40 LOG7[72667165:0]: Process 79306780 finished with code 0 (0 left) Specifically: I get SSL_read returned WANT_: retrying I am using sslv2 because sslV3 does not work with windows explorer. Any help would be appreciated. __________________________________ Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. http://promotions.yahoo.com/new_mail

2 1

using no certificate
by Zohar 14 Feb '05

14 Feb '05

Hi, I'm very new to all this issue of SSL, so I apologize if this question sounds stupid. I currently have a server that listens to connections on a TCP port. Clients that connect to it may do so using SSL v3 (mobile clients, which use their own SSL packages, so I have very little control over it). I want to add stunnel to my server's setting, to enable SSL communication. I have no need for the client to authenticate the server, I am only interested in the data being encrypted. I tried setting this up, but the client complains that my server certificate cannot be authenticated (I produced it using http://www.stunnel.org/pem/). Any pointers on how to set such a thing up (even for the time being, while I develop), without having to pay lots of money to a CA ?

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users