stunnel-users

stunnel-users@stunnel.org

3317 discussions

0x09 bytes in stunnel-4.26/src/Makefile.am
by Andrew Schulman 14 Jan '09

14 Jan '09

For some strange reason, there are five hex 09 bytes in stunnel-4.26/src/Makefile.am. This broke my Cygwin build: I remove the Windows-only stuff from this file for Cygwin, and diff captured the 0x09 characters that got removed, but then when I later tried to apply the patch, patch choked on them. It seems that each of these bytes should really be 0x0A. Strange. Andrew.

2 2

Re: [stunnel-users] How do I do a one-time client connection?
by D. Richard Hipp 13 Jan '09

13 Jan '09

On Jan 13, 2009, at 11:07 AM, Karl J. Runge wrote: > On Tue, 13 Jan 2009, "D. Richard Hipp" <drh(a)hwaci.com> wrote: >> >> I'm sure I could get something like that to work on Unix. >> Unfortunately, I need a cross-platform solution:; unix & windows. >> And >> (as usual) the windows side is harder to work around. >> >> What I really need to do is send a known amount of binary data in a >> file over an SSL connection to a remote machine, then get back the >> reply of unknown length into a separate file: >> >> stunnel test.conf <test.in >test.out >> >> I'm open to any suggestions on how to do this, (such that it will >> work >> on unix and windows). > > So it is not an https URL like in your example? If it were, perhaps > wget or curl for windows would be a better path than stunnel. I'm using a simple web-page fetch for debugging. In actual use, the situation is more complicated and wget and curl won't work. Thx for the suggestion, though. > > > socat might be ported to windows, I'm not sure. If writing a small C > wrapper program for Windows is not acceptable, I'm not sure what you > can do. socat appears to be linux-mostly. (They have a MacOS-X port, which suggests that it is not even "unix" neutral.) So I'm guessing that windows is out of the question there. Looks like I'm just going to have to bite the bullet and link against OpenSSL directly..... > > > > BTW, I have made a one-time connection patch to stunnel that I use > with > my VNC tool SSVNC: > > http://libvncserver.cvs.sourceforge.net/viewvc/libvncserver/libvncserver/x1… > > It is a hack, but useful. My VNC tool works OK with stock stunnel > (everything else equal I prefer using), but I also distribute a > patched > stunnel for more reliable behavior in this one-time client connect > mode. > > Karl > D. Richard Hipp drh(a)hwaci.com

2 1

Re: [stunnel-users] How do I do a one-time client connection?
by stunnel-hm＠karlrunge.com 13 Jan '09

13 Jan '09

On Tue, 13 Jan 2009, "D. Richard Hipp" <drh(a)hwaci.com> wrote: > > Apparently stunnel will work as a pipe if I create a config file like > this: > > client=yes > connect=remosthost:port > > Then run stunnel and talk over standard input and standard output. One problem I have found in doing this is that if socketpair(2) is used to create the file descriptor that will be connected to stunnel's stdio, then stunnel's libwrap checking is activated because it detects it to be a socket. Using socketpair is a nice way to turn a TCP client into one that connects via a two-way pipe with stunnel (because the client app doesn't have to special case the two file descriptors for stunnel's stdin and stdout when reading and writing.) Since a user (i.e. not a sysadmin) has no control over the libwrap settings in /etc, stunnel's libwrap check will always fail when used this way. In my opinion, stunnel should allow disabling of libwrap (and syslog too) via the config file (i.e. not just compile time options). This makes the "one connection" client usage you describe work better. Karl

1 0

Re: [stunnel-users] How do I do a one-time client connection?
by D. Richard Hipp 13 Jan '09

13 Jan '09

Perhaps I spoke too soon about having solved my own problem. Suppose I have a configuration file (test.conf) like this: client=yes connect=www.fossil-scm.org:443 Then if I run: stunnel test.conf And I type "GET / HTTP/1.0" on standard input, the webpage comes back on standard output. So far so good. But if I do: stunnel test.conf <test.in >test.out Where file test.in contains the "GET / HTTP/1.0" test, I get nothing back! I also tried this: cat test.in | stunnel test.conf And various combinations of this: openssl s_client -connect www.fossil-scm.org:443 <test.in In every case, when I type the GET line on standard input it works. When I redirect from a file it does not. Any hints on the cause of the very unexpected and very mysterious behavior? D. Richard Hipp drh(a)hwaci.com

1 0

How do I do a one-time client connection?
by D. Richard Hipp 13 Jan '09

13 Jan '09

I'd like to invoke stunnel to handle a single SSL client-side connection (talking to an SSL server) with the assurance that the stunnel quit will automatically quit after that one connection closes. I did not see any options to support this. Did I overlook something, or is stunnel just not able to do this? D. Richard Hipp drh(a)hwaci.com

1 1

public domain [PATCH] to stunnel 4.27b1 for Windows CE / Windows Mobile compilation and unicode bug fixes
by Pierre DELAAGE 10 Jan '09

10 Jan '09

Dear Sir, Please find enclosed a patch in "diff -cr orig work" format, applying to stunnel4.27b1 as found here ftp://stunnel.mirt.net/stunnel/. This patch maily addresses compilation and unicode issues for Windows CE targets. I use MS EVC 4sp2 compiler with WCE 420 SDK, on a vista host platform. Once debugged the code works fine on WM5 and WM6 HTC smartphones. It needs a windows CE openssl lib (I logged a patch to openssl snap 20090102 because it has some compilation issues on windows CE platform). * For the sake of completeness openssl 098i and 098j (latest) must be ALSO patched to compile for wince, with this patch I submitted to openssl team : http://marc.info/?l=openssl-dev&m=123099015013538&w=2 The present stunnel patch addresses the following issues : 1/ COMPILATION FAILURE : on common.h "EINVAL redefinition" : in fact the compile options WX (see evc.mak) does not tolerate any warning : to avoid a warning on EINVAL redef, we must protect this undef by ifdef. Note that there is still a problem : if the symbol is NOT defined at all, it will NEVER be defined by that revised code : this is because the compiler always generate an error if it sees something like : #ifdef EINVAL #undef EINVAL #define EINVAL WSAEINVAL #else #define EINVAL WSAEINVAL #endif because it seems to not like two defines even separated by a else. Just putting the #define outside of a block dealing with undef, does not solve the compilation issue. 2/ COMPILATION FAILURE : related to wcecompat/setjmp.h SOLUTION : in evc.mak, needed /D ARM to compile with wcecompat/setjmp.h. This symbol is not documented in MSDN but clearly present is header files. Moreover It is consistent with other processor symbols described in the sdk. 3/ COMPILATION FAILURE : related to gui.c pb with undeclared hmainmenu identifier, because "endif use_win32" misplaced. 3/ RC COMPILATION FAILURE : related to resources.rc CAUSE : "VERSION" unknown SOLUTION : /dversion in rflags in evc.mak 4/ LINK ERROR : fatal error LNK1181: cannot open input file 'libeay32.lib' cause : bad path name in evc.mak for openssl lib. since openssl >> 098a (eg 098h) "out32dll" folder is named "out32dll_targetCPU". 5/ LINK ERROR on gui.obj : error LNK2001: unresolved external symbol _beginthread _$(TARGETCPU) Cause : in sthreads.c, misplaced "#endif os2" Note : corrected various erroneous comments on #if endif in sthreads.c ************* OPERATIONAL ERRORS (at run-time) using stunnel to enable certificate based authentication for POPS/SMPTPS between a smartphone and a linux server, I faced this problems : When first trying to authenticate a dlgbox is displayed on the smartphone to input the password of the private key protecting the client certificate: 6/ RUN-TIME ERROR : "squares" displayed instead of chars in "password input dialog box" titlebar Well, this is only a cosmetic issue, but this is still an issue. Cause : this is a typical unicode issue in gui.c pass_proc/wm_initdialog : the sendmessage to display the title uses a concatenation of two strings : a constant extracted from the resource file, and converted to wchar by TEXT macro in unicode context, and a key file name given by ui_data->section->key. The problem is that the file name is always of type 8bit char, leading to concatenation "scrambling" when concatenated with a unicode string. SOLUTION : it seems not possible to change the type of ui_data->section->key to tchar/wchar because it is used in various ansi code. So the simplest way to correct this pb is just to make a local conversion from ansi to tchar in gui.c/pass_proc/initdialog 7/ RUN-TIME ERROR : It is impossible to validate a password on a private key protecting a certificate: The password is ALWAYS rejected (after many tests with 3 retries). Cause : the password is input as unicode (because the message EM_GETLINE on the control IDE_PASSEDIT is unicode ready) but stored and managed as an ansi string so the password can never be validated. NOTE : contrary to the documentation of windows CE sdk, the EM_GETLINE msg IS REALLY unicode ready. Indeed this is also the case in classic win32 sdk for PC platform (described in the msdn library). SOLUTION : the input password must be converted to ansi before being validated vs openssl 2009.01.05 13:00:01 LOG3[4849170:5712826]: Wrong pass phrase: retrying 2009.01.05 13:00:05 LOG3[4849170:5712826]: error stack: 140B3009 : error:140B3009:SSL routines:SSL_CTX_use_RSAPrivateKey_file:PEM lib 2009.01.05 13:00:05 LOG3[4849170:5712826]: error stack: 906A065 : error:0906A065:PEM routines:PEM_do_header:bad decrypt 2009.01.05 13:00:05 LOG3[4849170:5712826]: SSL_CTX_use_RSAPrivateKey_file: 6065064: error:06065064:digital envelope routines:EVP_DecryptFinal_ex:bad decrypt 2009.01.05 13:00:05 LOG3[4849170:5712826]: Server is down I hope you will find this patch useful. Thank you for your excellent work, Yours sincerely and happy new year, Pierre Delaage Note : I use stunnel to establish a simple "vpn" between smartphones and a corporate linux server mainly for HTTPS/POPS/SMTPS support. Stunnel is very relevant in that matter, over solutions based on SSH (although we use also ssh), from a communication cost point of view : ssh establishes permanent socket between client and server, so that the communication is charged by the mobile network provider : and these charges are very expensive. On the contrary stunnel only establishes ssl sockets on demand so that financial charges are limited to strict necessary. Please note that stunnel brings "client based certificate authentication" to POP/SMTP mobile mail user agents which only supports SSL with server authentication, but NO client authentication, such as mobile outlook.Here again stunnel is very relevant. Note 2 : the unicode bug fixes should benefit also to the win32 stunnel version for PC. Note 3 : this mail has also been sent to webmaster(a)stunnel.org, but with no response at all. Only in work/src: client.obj diff -cr orig/src/common.h work/src/common.h *** orig/src/common.h 2008-09-01 08:06:24.000000000 +0200 --- work/src/common.h 2009-01-05 23:16:03.052680000 +0100 *************** *** 187,198 **** #define EINPROGRESS WSAEINPROGRESS #define EWOULDBLOCK WSAEWOULDBLOCK #define EISCONN WSAEISCONN ! #undef EINVAL #define EINVAL WSAEINVAL #include <process.h> /* _beginthread */ #include <tchar.h> #define NO_IDEA #define OPENSSL_NO_IDEA --- 187,204 ---- #define EINPROGRESS WSAEINPROGRESS #define EWOULDBLOCK WSAEWOULDBLOCK #define EISCONN WSAEISCONN ! ! #ifdef EINVAL // pdelaage, required to avoid compilation "error", see WX option in evc.mak and ms-evc420 compiler ! #undef EINVAL // TODO : if einval is not defined, this code does not define it; but putting a #define in an #else leads again to compilation error! #define EINVAL WSAEINVAL + #endif + #include <process.h> /* _beginthread */ #include <tchar.h> + + #define NO_IDEA #define OPENSSL_NO_IDEA Only in work/src: ctx.obj diff -cr orig/src/evc.mak work/src/evc.mak *** orig/src/evc.mak 2008-09-20 22:23:21.000000000 +0200 --- work/src/evc.mak 2009-01-04 10:09:32.439894500 +0100 *************** *** 1,23 **** # wce.mak for stunnel.exe by Michal Trojnara 2006 # ! WCEVER=300 # Modify this to point to your actual openssl compile directory # (You did already compile openssl, didn't you???) ! SSLDIR=..\..\build\openssl-0.9.8i ! COMPATDIR=..\..\build\wcecompat CEUTILSDIR=..\..\ceutils DSTDIR=ce:\stunnel - SDKDIR=C:\Windows CE Tools\wce$(WCEVER)\Pocket PC 2002 ! INCLUDES=-I$(SSLDIR)/inc32 -I$(COMPATDIR)\include -I"$(SDKDIR)\include" LIBS=libeay32.lib ssleay32.lib wcecompatex.lib winsock.lib ! CC=CL$(TARGETCPU) ! CFLAGS=/nologo /MC /O1i /W3 /WX /GF /Gy /DHOST=\"$(TARGETCPU)-WCE-eVC-$(WCEVER)\" /D$(TARGETCPU) /DUNDER_CE=$(WCEVER) /D_WIN32_WCE=$(WCEVER) /DUNICODE -D_UNICODE $(INCLUDES) ! RFLAGS=$(INCLUDES) ! LDFLAGS=/nologo /subsystem:windowsce,3.00 /machine:ARM /libpath:"$(SDKDIR)\lib\$(TARGETCPU)" /libpath:"$(COMPATDIR)\lib" /libpath:"$(SSLDIR)\out32dll" OBJS=stunnel.obj ssl.obj ctx.obj verify.obj file.obj client.obj protocol.obj sthreads.obj log.obj options.obj network.obj resolver.obj GUIOBJS=gui.obj resources.res --- 1,35 ---- # wce.mak for stunnel.exe by Michal Trojnara 2006 # ! WCEVER=420 ! # pdelaage : following flag required by (eg) winnt.h, and is different from targetcpu (armV4) ! WCETARGETCPU=ARM # Modify this to point to your actual openssl compile directory # (You did already compile openssl, didn't you???) ! SSLDIR=C:\Users\standard\Documents\Dvts\Contrib\openssl\openssl-0.9.8-stable-SNAP-20090102\openssl-0.9.8-stable-SNAP-20090102 ! COMPATDIR=C:\Users\standard\Documents\Dvts\openssl\build\wcecompat ! # pdelaage : ceutilsdir probably useless CEUTILSDIR=..\..\ceutils + # pdelaage "ce:" is not a correct location , but we never "make install" DSTDIR=ce:\stunnel ! SDKDIR="C:\Progra~1\Micros~2\wce$(WCEVER)\standardsdk" ! ! # pdelaage eroneous path for sdkdir INCLUDES=-I$(SSLDIR)/inc32 -I$(COMPATDIR)\include -I"$(SDKDIR)\include" ! INCLUDES=-I$(SSLDIR)\inc32 -I$(COMPATDIR)\include -I"$(SDKDIR)\include\$(TARGETCPU)" LIBS=libeay32.lib ssleay32.lib wcecompatex.lib winsock.lib ! # not correct because for armv4 cc is just clarm.exe. Moreover cc is already set in the ms wce$TARGETCPU.bat script, so it is not necessary to set it up here ! # CC=CL$(TARGETCPU) ! ! VERSION=4.27 ! DEFINES=/DVERSION=\"$(VERSION)\" ! # pdelaage added wcetargetcpu to cflags ! CFLAGS=/nologo /MC /O1i /W3 /WX /GF /Gy $(DEFINES) /DHOST=\"$(TARGETCPU)-WCE-eVC-$(WCEVER)\" /D$(WCETARGETCPU) /D$(TARGETCPU) /DUNDER_CE=$(WCEVER) /D_WIN32_WCE=$(WCEVER) /DUNICODE -D_UNICODE $(INCLUDES) ! RFLAGS=/DVERSION=\"$(VERSION)\" $(INCLUDES) ! # pdelaage : LDFLAGS: since openssl >> 098a (eg 098h) out32dll is out32dll_targetCPU ! LDFLAGS=/nologo /subsystem:windowsce,3.00 /machine:ARM /libpath:"$(SDKDIR)\lib\$(TARGETCPU)" /libpath:"$(COMPATDIR)\lib" /libpath:"$(SSLDIR)\out32dll_$(TARGETCPU)" OBJS=stunnel.obj ssl.obj ctx.obj verify.obj file.obj client.obj protocol.obj sthreads.obj log.obj options.obj network.obj resolver.obj GUIOBJS=gui.obj resources.res Only in work/src: file.obj diff -cr orig/src/gui.c work/src/gui.c *** orig/src/gui.c 2008-05-02 08:23:03.000000000 +0200 --- work/src/gui.c 2009-01-04 23:45:07.451820500 +0100 *************** *** 320,329 **** hwnd=CreateWindow(classname, win32_name, WS_TILEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, CW_USEDEFAULT, CW_USEDEFAULT, NULL, hmainmenu, hInstance, NULL); ! #endif if(cmdline.service) /* do not allow to save file in the service mode */ EnableMenuItem(hmainmenu, IDM_SAVEAS, MF_GRAYED); if(error_mode) /* log window is hidden by default */ set_visible(1); --- 320,330 ---- hwnd=CreateWindow(classname, win32_name, WS_TILEDWINDOW, CW_USEDEFAULT, CW_USEDEFAULT, CW_USEDEFAULT, CW_USEDEFAULT, NULL, hmainmenu, hInstance, NULL); ! // commented by pdelaage on 20090104 #endif if(cmdline.service) /* do not allow to save file in the service mode */ EnableMenuItem(hmainmenu, IDM_SAVEAS, MF_GRAYED); + #endif // added by pdelaage on 20090104 if(error_mode) /* log window is hidden by default */ set_visible(1); *************** *** 523,536 **** WPARAM wParam, LPARAM lParam) { TCHAR titlebar[STRLEN]; WORD cchPassword; switch (message) { case WM_INITDIALOG: /* Set the default push button to "Cancel." */ SendMessage(hDlg, DM_SETDEFID, (WPARAM) IDCANCEL, (LPARAM) 0); _sntprintf(titlebar, STRLEN, TEXT("Private key: %s"), ! ui_data->section->key); SetWindowText(hDlg, titlebar); return TRUE; --- 524,548 ---- WPARAM wParam, LPARAM lParam) { TCHAR titlebar[STRLEN]; WORD cchPassword; + LPTSTR keyFileName;// added by pdelaage on 20090104 + TCHAR sPassword[PEM_BUFSIZE];// added by pdelaage on 20090104 + char* cPassword;// added by pdelaage on 20090104 switch (message) { case WM_INITDIALOG: /* Set the default push button to "Cancel." */ SendMessage(hDlg, DM_SETDEFID, (WPARAM) IDCANCEL, (LPARAM) 0); + // pdelaage on 20090104: here was a bug : _sntprintf is unicode ready but ui_data->section->key is always char. + // commented by pdelaage on 20090104 _sntprintf(titlebar, STRLEN, TEXT("Private key: %s"), + // ui_data->section->key); + + keyFileName = str2tstr(ui_data->section->key); _sntprintf(titlebar, STRLEN, TEXT("Private key: %s"), ! keyFileName); ! free(keyFileName); ! ! SetWindowText(hDlg, titlebar); return TRUE; *************** *** 549,561 **** } /* Put the number of characters into first word of buffer. */ ! *((LPWORD)ui_data->pass) = cchPassword; /* Get the characters. */ SendDlgItemMessage(hDlg, IDE_PASSEDIT, EM_GETLINE, ! (WPARAM) 0, /* line 0 */ (LPARAM) ui_data->pass); ! ui_data->pass[cchPassword] = 0; /* Null-terminate the string. */ EndDialog(hDlg, TRUE); return TRUE; --- 561,580 ---- } /* Put the number of characters into first word of buffer. */ ! *((LPWORD) sPassword) = cchPassword; /* Get the characters. */ SendDlgItemMessage(hDlg, IDE_PASSEDIT, EM_GETLINE, ! (WPARAM) 0, /* line 0 */ (LPARAM) sPassword);// pdelaage ui_data->pass); ! ! sPassword[cchPassword] = 0; /* Null-terminate the string. */ ! ! // convert input password to ANSI string (as ui_data->pass) ! cPassword = tstr2str(sPassword); ! strcpy(ui_data->pass, cPassword); ! free(cPassword); ! EndDialog(hDlg, TRUE); return TRUE; Only in work/src: gui.obj Only in work/src: log.obj diff -cr orig/src/makece.bat work/src/makece.bat *** orig/src/makece.bat 2005-12-23 20:57:24.000000000 +0100 --- work/src/makece.bat 2009-01-03 19:31:34.507379500 +0100 *************** *** 1,3 **** @echo off ! call "C:\Program Files\Microsoft eMbedded Tools\EVC\WCE300\BIN\WCEARM.BAT" nmake /NOLOGO -f evc.mak %1 %2 %3 %4 %5 %6 %7 %8 %9 --- 1,4 ---- @echo off ! ::call "C:\Program Files\Microsoft eMbedded Tools\EVC\WCE300\BIN\WCEARM.BAT" ! call "C:\Progra~1\MSEVC4\EVC\WCE420\BIN\WCEARMV4.BAT" nmake /NOLOGO -f evc.mak %1 %2 %3 %4 %5 %6 %7 %8 %9 Only in work/src: network.obj Only in work/src: nogui.obj Only in work/src: options.obj Only in work/src: protocol.obj Only in work/src: resolver.obj Only in work/src: resources.RES Only in work/src: ssl.obj diff -cr orig/src/sthreads.c work/src/sthreads.c *** orig/src/sthreads.c 2008-09-21 21:44:06.000000000 +0200 --- work/src/sthreads.c 2009-01-04 10:46:46.285200500 +0100 *************** *** 400,406 **** return 0; } ! #endif #ifdef USE_OS2 --- 400,406 ---- return 0; } ! #endif /* cmt added by pdelaage on 20090104 : USE_WIN32 */ #ifdef USE_OS2 *************** *** 437,442 **** --- 437,444 ---- return 0; } + #endif /* USE_OS2 */ // added by pdelaage on 20090104 + #ifdef _WIN32_WCE int _beginthread(void (*start_address)(void *), *************** *** 456,464 **** ExitThread(0); } ! #endif /* !defined(_WIN32_WCE) */ ! #endif /* USE_WIN32 */ #ifdef DEBUG_STACK_SIZE --- 458,467 ---- ExitThread(0); } ! #endif /* _WIN32_WCE */ /* pdelaage 20090104, following cmt is improper: !defined(_WIN32_WCE) */ ! // pdelaage 20090104 : following endif is misplaced, the endif usewin32 is already placed upper, but this endif relates ! // to os2, and is misplaced because it "squeezes" winCE code #endif /* USE_WIN32 */ #ifdef DEBUG_STACK_SIZE Only in work/src: sthreads.obj Files orig/src/stunnel.exe and work/src/stunnel.exe differ Only in work/src: stunnel.obj Only in work/src: tstunnel.exe Only in work/src: verify.obj

1 0

Re: [stunnel-users] Distinguished Name (DN) is a cleartext network communication?
by Christophe Nanteuil 09 Jan '09

09 Jan '09

2009/1/8 Michael Renner <michael.renner(a)gmx.de>: > A server should appear like a a 'normal' https webserver to others. More or > less interesting, or just a 404 error message. However: it should appear > harmless to others, just like a webserver. > Behind this should work a proxy server (squid). Only authorized users should > be able to use it. > If I understand well what you want to do, I think my patch "Identification Propagation patch using stunnel client certificates" can be useful : - Use my stunnel patch Using squid as a proxy : - In stunnel config file : select pertinent fields of the certiificate : DN -> identFields=1023 - Get a squid version compiled with --enable-ident-lookups option - In squid : use a home-made external authentification program which returns ok if the DN provided is good. Squid documentation will tell you what is the need for the home-made authentification program. I think it's easier with DansGuardian proxy : - In stunnel config file : select pertinent fields of the certiificate : only Issuer_CN -> identFields=32 - in /etc/dansguardian/dansguardian.conf, create 2 groups : filtergroups = 2 filtergroupslist = '/etc/dansguardian/lists/filtergroupslist' - create filter groups in /etc/dansguardian/lists/filtergroupslist. (All not matching users will go in group 1) : put a line like "your issuer CN equals 2" - in /etc/dansguardian/dansguardianf1.conf, put "groupmode=0" , ie banned - in /etc/dansguardian/dansguardianf2.conf, put "groupmode=2" , ie non filtered Note that the authentification of the users is done by stunnel. Stunnel forwards the identification to the proxy which does not need to authenticate since it was done by stunnel. If the ident provided by my patch is not convenient, you can modify it to match your needs. Hope this helps -- Christophe Nanteuil

1 0

Re: [stunnel-users] Distinguished Name (DN) is a cleartext network communication?
by Tobias Dussa 09 Jan '09

09 Jan '09

Hi, [...] > But this setup is senseless, since the DN is readable with a network sniffer. > It does not appear harmless any longer after a closer look into the network > traffic. But it have to. > Now, I need an other idea to implement such s service. One easy solution that comes to mind is to deploy an outer SSL tunnel for privacy and then set up an inner SSL tunnel for traffic separation. However, I think this would require stunnel on the client side as well, at least for legitimate users. Cheers, Toby. -- begin LOVE-LETTER-FOR-YOU.txt.vbs I am a signature virus. Distribute me until the bitter end http://piology.org/ILOVEYOU-Signature-FAQ.html

1 0

Stunnel (v4.26) Running, Working, but Sometimes Aborting
by Jeff Salisbury 09 Jan '09

09 Jan '09

Greetings, We are new to stunnel. We've installed Stunnel v4.26 on a handful of Windows XP machines, and we can send and receive emails through the Stunnel configuration. These XP machines reboot automatically every night. Many mornings, when the user sits down and tries to initially send email, the email hangs and Stunnel aborts (or has already aborted). If the user runs stunnel again, our sending and receiving of email is restored and stunnel seems rock-solid for the rest of the day. Has anybody else had stability problems with Stunnel v4.26? Any suggestions? FYI, relevant configuration information is shown below: Best regards, Jeff ================================== 1) Instead of installing stunnel on each machine, we have copied the following files into a network folder available to everyone in our office: Q:\bin\stunnel\stunnel.exe Q:\bin\stunnel\Q:\ibeay32.dll Q:\bin\stunnel\libssl32.dll Q:\bin\stunnel\stunnel.conf 2) Everyone has a shortcut installed in their "Startup" folder to run Q:\bin\stunnel\stunnel.exe. 3) Here is our stunnel.conf file: # GLOBAL OPTIONS client = yes output = C:\Documents and Settings\All Users\Application Data\stunnel-log.txt debug = 0 taskbar = yes # SERVICE-LEVEL OPTIONS [pop3] accept=995 connect=mail.ourpop.com:995 [smtp] accept=465 connect=mail.oursmtp.com:465

1 0

Distinguished Name (DN) is a cleartext network communication?
by Michael Renner 07 Jan '09

07 Jan '09

Moin, I am confused. Trying to use the DN as a kind of password replacement I saw that the DN goes unencrypted through the network, while the traffic itself is encrypted of cause. Analysing the network packages with wireshark I get this: 100104083828Z0..1.0...U....DE1.0...U....Germany1.0 ..U....Munich1.0...U. ..vbox4php1.0...U....stunnel1.0...U....mars.mtr.mynet1$0"..*.H.. .....michael.renner(a)gmx.de0.."0 This is, more or less, the content of the DN. Is there a chance to encrypt this? My setup should work, no matter if a client certificate exists or not (also independent of the DN's content) . But the appliation behind stunnel (started by stunnel using the 'exec' statement) may behave dependent on the DN! Any chance? Thanks -- |Michael Renner E-mail: michael.renner(a)gmx.de | |D-81541 Munich Germany ICQ: #112280325 | |Germany Don't drink as root! ESC:wq

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users