stunnel-users

stunnel-users@stunnel.org

4 participants
3315 discussions

[PATCH] Spectre v2 Vulnerability Mitigations
by Nitin Mutkawoa 07 Mar '18

07 Mar '18

Hello To prevent any leakage (Spectre v2) from a compromised VM on same physical host, this patch would mitigate the impact. --- configure.ac.orig 2018-03-04 01:46:55.877067173 +0400 +++ configure.ac 2018-03-04 01:49:26.422625147 +0400 @@ -101,6 +101,11 @@ if test "$GCC" = yes; then fi AX_APPEND_COMPILE_FLAGS([-D_FORTIFY_SOURCE=2]) +# Spectre v2 mitigations +AX_APPEND_COMPILE_FLAGS([-mfunction-return=thunk]) +AX_APPEND_COMPILE_FLAGS([-mindirect-branch=thunk]) + AC_MSG_NOTICE([**************************************** libtool]) LT_INIT([disable-static]) AC_SUBST([LIBTOOL_DEPS]) Kind regards, Nitin J Mutkawoa https://tunnelix.com https://hackers.mu

1 0

Re: [stunnel-users] Connect using TLS with public Web Server
by peter＠easthope.ca 06 Mar '18

06 Mar '18

From: Carlos Castro <carlos.castro.guerrero(a)gmail.com> Date: Fri, 2 Feb 2018 12:04:08 +0100 > I have older application and now I need connect with external server HTTPS > using TLS . My application doesn't support with TLS and I think use Stunnel > to connect with this Server HTTPS. Same requirement here. Have you tried this configuration? ; yourhost:/etc/stunnel4/stunnel.conf ... [https] client = yes accept = 443 transparent = destination Regards, ... Peter E. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca https://en.wikibooks.org/wiki/Medical_Suction_Machines https://en.wikibooks.org/wiki/Oberon

3 6

Stunnel in server mode with certificate from the Windows Certificate Store
by merlin＠mp3merlin.net 06 Mar '18

06 Mar '18

Hello, I'm trying to use stunnel in server mode with certificates from the Windows Certificate Store. I have a basic configuration which is working with a PEM certificate file and I'm trying to get it to use a cert via the CAPI engine. Here is my basic (working) config: debug = debug output = C:\stunnel\stunnel.log options = -NO_SSLv3 [https] accept = 443 connect = 80 cert = stunnel.pem Here is my config using the CAPI engine: debug = debug output = C:\stunnel\stunnel.log engine = capi engineCtrl = debug_level:2 engineCtrl = debug_file:c:\stunnel\capi.log engineCtrl = store_flags:1 engineCtrl = list_certs options = -NO_SSLv3 [https] accept = 443 connect = 80 engineId = capi However stunnel does not seem to find a certificate to use: [...] 2018.03.06 10:22:05 LOG7[main]: Enabling support for engine "capi" 2018.03.06 10:22:05 LOG7[main]: Executing engine control command debug_level:2 2018.03.06 10:22:05 LOG7[main]: Executing engine control command debug_file:c:\stunnel\capi.log 2018.03.06 10:22:05 LOG7[main]: Executing engine control command store_flags:1 2018.03.06 10:22:05 LOG7[main]: Executing engine control command list_certs 2018.03.06 10:22:05 LOG7[main]: Initializing engine #1 (capi) 2018.03.06 10:22:05 LOG6[main]: Engine #1 (capi) initialized [...] 2018.03.06 10:22:05 LOG6[main]: Initializing service [https] 2018.03.06 10:22:05 LOG7[main]: Ciphers: HIGH:!DH:!aNULL:!SSLv2 2018.03.06 10:22:05 LOG7[main]: TLS options: 0x01004004 (+0x03004000, -0x02000000) 2018.03.06 10:22:05 LOG7[main]: No certificate or private key specified [...] And I have no certificates listed in the CAPI debug log: Setting debug level to 2 Setting debug file to c:\stunnel\capi.log Setting flags to 1 Listing certs for store MY Opening certificate store MY capi_cert_get_fname When I load the engine via OpenSSL, I can see that a certificate is present in the store: C:\stunnel\bin>openssl.exe engine -t dynamic -pre "SO_PATH:C:\stunnel\engines\capi.dll" -pre LOAD -post store_flags:1 -post store_name:MY -post list_certs WARNING: can't open config file: /devel/win32/openssl/openssl.cnf (dynamic) Dynamic engine loading support [Success]: SO_PATH:C:\stunnel\engines\capi.dll [Success]: LOAD Loaded: (capi) CryptoAPI ENGINE [ available ] [Success]: store_flags:1 Certificate 0 Friendly Name "test" Subject: CN = test Issuer: CN = test [Success]: list_certs This certificate (and the associated private key) has been generated via the IIS Manager console and I have imported it in the Local Computer Store (with the private key). Does anybody have any idea what I am missing to get this to work ? I can provide more logs and run more tests if necessary. I'm using Stunnel 5.44 on Windows 2008 R2. I tried with an older version (5.40) but same problem. Thanks. Kevin

1 0

Re: [stunnel-users] Re: Connect using TLS with public Web Server
by Carlos Castro 06 Mar '18

06 Mar '18

Hi All , it's mandatory for use stunnel wich the infrastructure has client stunnel and server stunnel ?? Or I can have client stunnel vs Web server HTTPS without stunnel server , only web server https . I newbie in stunnel , but i think is mandatory install stunnel in both sites , that's is correct? Regards On 05/03/18 20:23, Carlos Castro wrote: > > Thanks @Mike > > If possible use Squid + stunnel to solve the problem with host > header? The application is very very old . > > Thanks > > > On 05/03/18 20:06, Mike Spooner wrote: >> >> The problem is the "Host: ..." header that is being sent to the >> remote server. You need to configure 127.0.0.1:19021 as a proxy in >> your app (and curl) and then have the app (curl) fetch >> https://ctm.omego.net >> >> >> Not sure how to do that in curl, but search the curl manpage for any >> mentions of "proxy". >> >> -- Mike Spooner >> >> --------- Original Message --------- >> *From*: Carlos Castro >> *Date*: Mon Mar 05 12:28:15 GMT+00:00 2018 >> *Subject*: Re: [stunnel-users] Connect using TLS with public Web Server >> Hello >> >> Thanks @Peter >> >> >> Yes , my application not support TLS and I need the application connect >> using TLS , for this i using stunnel (i hope) >> >> When I make curl -v http://127.0.0.1:19021 : >> >> curl -v http://127.0.0.1:19201 >> * Rebuilt URL to: http://127.0.0.1:19201/ >> * Trying 127.0.0.1... >> * Connected to 127.0.0.1 (127.0.0.1) port 19201 (#0) >> > GET / HTTP/1.1 >> > Host: 127.0.0.1:19201 >> > User-Agent: curl/7.47.0 >> > Accept: */* >> > >> * HTTP 1.0, assume close after body >> < HTTP/1.0 400 Bad Request >> < Server: AkamaiGHost >> < Mime-Version: 1.0 >> < Content-Type: text/html >> < Content-Length: 208 >> < Expires: Mon, 05 Mar 2018 12:25:53 GMT >> < Date: Mon, 05 Mar 2018 12:25:53 GMT >> < Connection: close >> >> The web ctm.omgeo.net only works in mode HTTPS , . >> >> Thanks Peter >> >> >> On 05/03/18 13:22, Peter Pentchev wrote: >> > On Mon, Mar 05, 2018 at 12:32:41PM +0100, Carlos Castro wrote: >> >> Hello , >> >> >> >> Thanks @Peter >> >> >> >> I'm trying to configure to connect with my PC to this Public server >> >> https://ctm.omgeo.net using TLS1.2 but i don't can. >> >> >> >> I'm need setup stunnel for old application doesn't support TLS , >> and this >> >> application need connect with this public server to send data. >> >> >> >> >> >> I'm using the Peter config , but nothing . I try this config : >> >> >> >> [omgeo] >> >> client = yes >> >> accept = 127.0.0.1:19201 >> >> connect = ctm.omgeo.net:443 >> >> verify = 2 >> >> CApath = /etc/ssl/certs/ >> >> >> >> >> >> I'm using Curl to try connect , I'm recive this error >> >> >> >> /etc/ssl/certs# curl -v https://127.0.0.1:19201 >> > Maybe I'm reading this wrong, but if your client application does not >> > support TLS, then it won't speak HTTPS, it would speak plain HTTP. >> > That's what the configuration you're using does - it tells stunnel to >> > run in client mode, i.e. something will connect to stunnel using >> > an unencrypted connection and stunnel will connect to a TLS server >> > (in this case an HTTPS server). >> > >> > So what happens when you try almost the same query, but with the "http" >> > scheme instead of the "https" one? >> > >> > curl -v http://127.0.0.1:19201 >> > >> > G'luck, >> > Peter >> > >> >> _______________________________________________ >> stunnel-users mailing list >> stunnel-users(a)stunnel.org >> https://www.stunnel.org/cgi-bin/mailman/listinfo/stunnel-users >

2 1

Client cert auth ?
by Brian Ipsen 27 Feb '18

27 Feb '18

Hi I am trying to see if I can get stunnel to authenticate using a client certificate towards a F5 setup - but I am having trouble getting it to work. Certificates are issued froma Microsoft PKI - where the F5 checks validity via an OCSP responder. In my stunnel config file, I have: [F5Cert] client=yes accept = 127.0.0.1:1598 connect = F5test.xxx.dk:443 delay = yes CAFile = GlobalSign-cert-Chain.pem Cert = BaaSClientCertificatePlain.pem key = BaaSClientCertificatePlain.key verify = 2 In the CAFile, I have the root CA and issuing certificate from GlobalSign - which have created the SSL certificate being used on the F5 (server side). Cert and Key points to the certificate and private key from my internal Microsoft based PKI.. But should the certificate chain from my internal PKI be listed somewhere as well ? Is this the way to do it - and is stunnel capable of handling client certificate validation ? Regards Brian

3 2

Question on reconnection after TCP RST
by Chawla, Vikas 27 Feb '18

27 Feb '18

Hi, We ran into an issue where stunnel after TCP RST from server, retries to re-establish connection after 5 seconds with exponential back off. Wanted to check if there is configuration parameter for us to modify the reconnection time to be a lower number. Thanks, Vikas

1 0

[PATCH] Address already in use (98) when binding to localhost
by Christian Kujau 06 Feb '18

06 Feb '18

Hi, I reported the following to the Fedora bugtracker[0], but only then realized that this happens with the upstream version too. In short: since stunnel 5.44 I am no longer able to have stunnel bind to localhost, when "localhost" is literally mentioned in the configuration file: $ cat stunnel.test [test] client = yes protocol = smtp accept = localhost:12345 connect = localhost:2025 $ stunnel-5.44 stunnel.test [...] [ ] Binding service [test] [ ] Listening file descriptor created (FD=6) [ ] Option SO_REUSEADDR set on accept socket [ ] Service [test] (FD=6) bound to 127.0.0.1:12345 [ ] Listening file descriptor created (FD=7) [ ] Option SO_REUSEADDR set on accept socket [!] bind: Address already in use (98) [!] Error binding service [test] to 127.0.0.1:12345 [ ] Unbinding service [test] [ ] Service [test] closed (FD=6) [ ] Service [test] closed When using "127.0.0.1" or "::1" instead of "localhost" in the configuration file, stunnel-5.44 works. However, then one can only connect to either the IPv4 _or_ the IPv6 address, depending on what's configured. With stunnel-5.43 and "accept=localhost:12345" both IPv4 and IPv6 was available. I suspect that this is related to the following change log entry for 5.44: > Default accept address restored to INADDR_ANY. I have attached a patch to revert that (?) change and also included a test script that fails on my system when the patch is not applied. I see "Version 5.45" already mention in the changelog on the website, but now download yet? Thanks, Christian. [0] https://bugzilla.redhat.com/show_bug.cgi?id=1542361 -- BOFH excuse #424: operation failed because: there is no message for this error (#1014)

1 0

Re: [stunnel-users] stunnel.log not generated in window server 2012 R2
by Zhang, Joanne 02 Feb '18

02 Feb '18

Hello. I installed a Stunnel-5.44-win32 on a Window Server 2012 R2 box. I am using it in client mode only as it is required by the Vendor. It works fine, I can connect to my Vendor's server via Stunnel . However, I don't see any stunnel.log generated when it is run as a service and I searched the entire directory on the server. I know the output path is working . As when I run Stunnel GUI Start, the log is created in the output folder specified in the conf file. Have anyone seen this problem before please? Here is my setting for stunnel.conf that relates to the debug log. debug = 7 output = C:\Program Files (x86)\stunnel\stunnel.log Thanks very much for your help ahead. Joanne _______________________________________________________________________ If you received this email in error, please advise the sender (by return email or otherwise) immediately. You have consented to receive the attached electronically at the above-noted email address; please retain a copy of this confirmation for future reference. Si vous recevez ce courriel par erreur, veuillez en aviser l'expéditeur immédiatement, par retour de courriel ou par un autre moyen. Vous avez accepté de recevoir le(s) document(s) ci-joint(s) par voie électronique à l'adresse courriel indiquée ci-dessus; veuillez conserver une copie de cette confirmation pour les fins de reference future.

1 0

Connect using TLS with public Web Server
by Carlos Castro 02 Feb '18

02 Feb '18

Hi All, I have older application and now I need connect with external server HTTPS using TLS . My application doesn't support with TLS and I think use Stunnel to connect with this Server HTTPS. Wich is the mode I should choose to configurate this connection ? Proxy mode? or like examples created over gmail in default configuration File? The external server , is public server for all people ? should be necesary special certs ? or whit predeterminate certs inside windows (for use IE, chroome , firefox etc..etcc) is necesary ? Many thanks Regards

1 0

Re (2): Relationship to Netfilter.
by peter＠easthope.ca 26 Jan '18

26 Jan '18

From: Ludolf Holzheid <lholzheid(a)bihl-wiedemann.de> Date: Thu, 25 Jan 2018 18:23:58 +0100 > If it was in this diagram, it would be a 'local process' on the > application layer. So, two softwares, netfilter and stunnel, in a computer system. stunnel in the OSI application layer and netfilter in the protocol, network and link layers. That's a relationship. > Obviously nowhere. (Stunnel is not related to the Linux Netfilter.). Depends on your personal definition of a relationship. Thanks for explaining, ... Peter E. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca https://en.wikibooks.org/wiki/Medical_Suction_Machines https://en.wikibooks.org/wiki/Oberon

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

stunnel-users