April 2024 - stunnel-users

unknow TCP service 11702
by tomoyalin＠yahoo.co.jp 18 Apr '24

18 Apr '24

how to solve problem from stunnel config file when using port is not 80 or 443. ( our config tcp service port is 11702)

2 1

Having strange issue with newer kernels? 6.8.
by Michael D. Setzer II 17 Apr '24

17 Apr '24

Having issues with stunnel not working with this settings that have work with previous kernels? [guamsmtp] client=yes accept = 127.0.0.1:20466 connect = smtp1.guam.net:465 connect = smtp1.guam.net:465 debug = 7 verifyChain = yes CApath = /etc/ssl/certs checkHost = mail.guam.net OCSPaia = yes But now changing to [guamsmtp] client=yes accept = 127.0.0.1:20466 connect = smtp1.guam.net:465 connect = smtp1.guam.net:465 debug = 7 Seems to work. systemctl status stunnel. stunnel.service - TLS tunnel for network daemons Loaded: loaded (/usr/lib/systemd/system/stunnel.service; enabled; preset: disabled) Drop-In: /usr/lib/systemd/system/service.d └─10-timeout-abort.conf Active: active (running) since Thu 2024-04-18 14:48:15 ChST; 5s ago Process: 15349 ExecStart=/usr/bin/stunnel (code=exited, status=0/SUCCESS) Main PID: 15352 (stunnel) Tasks: 3 (limit: 18938) Memory: 3.6M CPU: 1.618s CGroup: /system.slice/stunnel.service └─15352 /usr/bin/stunnel Apr 18 14:48:14 setzconote.dyndns.org systemd[1]: Starting stunnel.service - TLS tunnel for network daemons... Apr 18 14:48:15 setzconote.dyndns.org stunnel[15349]: LOG5[ui]: stunnel 5.72 on x86_64-redhat-linux-gnu platform Apr 18 14:48:15 setzconote.dyndns.org stunnel[15349]: LOG5[ui]: Compiled/running with OpenSSL 3.1.1 30 May 2023 Apr 18 14:48:15 setzconote.dyndns.org stunnel[15349]: LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6,SYSTEMD TLS:ENGINE,> Apr 18 14:48:15 setzconote.dyndns.org stunnel[15349]: LOG5[ui]: Reading configuration from file /etc/stunnel/stunnel.co> Apr 18 14:48:15 setzconote.dyndns.org stunnel[15349]: LOG5[ui]: UTF-8 byte order mark not detected Apr 18 14:48:15 setzconote.dyndns.org stunnel[15349]: LOG5[ui]: FIPS mode disabled Apr 18 14:48:15 setzconote.dyndns.org stunnel[15349]: LOG5[ui]: Configuration successful Apr 18 14:48:15 setzconote.dyndns.org systemd[1]: Started stunnel.service - TLS tunnel for network daemons. Using the longer one gives this after attempting to sent smtp. stunnel.service - TLS tunnel for network daemons Loaded: loaded (/usr/lib/systemd/system/stunnel.service; enabled; preset: disabled) Drop-In: /usr/lib/systemd/system/service.d └─10-timeout-abort.conf Active: active (running) since Thu 2024-04-18 14:57:22 ChST; 1min 15s ago Process: 15616 ExecStart=/usr/bin/stunnel (code=exited, status=0/SUCCESS) Main PID: 15619 (stunnel) Tasks: 3 (limit: 18938) Memory: 4.0M CPU: 1.639s CGroup: /system.slice/stunnel.service └─15619 /usr/bin/stunnel Apr 18 14:58:11 setzconote.dyndns.org stunnel[15619]: LOG4[3]: CERT: Pre-verification error: unable to get local issuer> Apr 18 14:58:11 setzconote.dyndns.org stunnel[15619]: LOG4[3]: Rejected by CERT at depth=0: CN=*.guam.net Apr 18 14:58:11 setzconote.dyndns.org stunnel[15619]: LOG7[3]: TLS alert (write): fatal: unknown CA Apr 18 14:58:11 setzconote.dyndns.org stunnel[15619]: LOG3[3]: SSL_connect: ssl/statem/statem_clnt.c:1889: error:0A0000> Apr 18 14:58:11 setzconote.dyndns.org stunnel[15619]: LOG5[3]: Connection closed/reset: 0 byte(s) sent to TLS, 0 byte(s> Apr 18 14:58:11 setzconote.dyndns.org stunnel[15619]: LOG7[3]: Deallocating application specific data for session conne> Apr 18 14:58:11 setzconote.dyndns.org stunnel[15619]: LOG7[3]: Remote descriptor (FD=16) closed Apr 18 14:58:11 setzconote.dyndns.org stunnel[15619]: LOG7[3]: local_rfd/local_wfd reset (FD=3) Apr 18 14:58:11 setzconote.dyndns.org stunnel[15619]: LOG7[3]: Local descriptor (FD=3) closed Apr 18 14:58:11 setzconote.dyndns.org stunnel[15619]: LOG7[3]: Service [guamsmtp] finished (0 left) lines 1-23/23 (END) Was using the Fedora stunnel the is 5.71, but downloaded the latest 5.72, but seem to get same results. Had some issues with nvidia drives that work fine with 6.7.11 kernels, but fail with the 6.8.x drivers, so not sure if it is linked to that? +------------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor (Retired) mailto:mikes@guam.net mailto:msetzerii@gmail.com mailto:msetzerii@gmx.com Guam - Where America's Day Begins G4L Disk Imaging Project maintainer http://sourceforge.net/projects/g4l/ +------------------------------------------------------------+

1 0

stunnel doesn't allow two client certificates with the same Subject DN?
by Christopher Schultz 15 Apr '24

15 Apr '24

Hello, I was recently rotating a certificate for a service and I went through my usual procedure: 1. Generate a new client key+cert; don't place them into service, yet 2. Distribute the new certificate to all my stunnel servers that need to trust it by placing it at the end of each of my servers' CAFile files 3. Restart all stunnel services 4. Swap the old key+cert for the client with the new key+cert 5. Test that all is well I've found that if the Distinguished Name of both the old and new certificate are the same, stunnel will only trust the one that is mentioned /first/ in the CAFile. For example, if the CAFile contains: -----BEGIN CERTIFICATE----- certificate A Serial Number: 12345678 Subject: C=US, OU=Testing, O=Example.com, CN=test -----BEGIN CERTIFICATE----- -----BEGIN CERTIFICATE----- certificate B Serial Number: 87654321 Subject: C=US, OU=Testing, O=Example.com, CN=test -----BEGIN CERTIFICATE----- Certificate A will be trusted but Certificate B will not be trusted. The error shown in the logs is: CERT: Pre-verification error: self signed certificate Apr 15 21:33:06 mirth-pcc.chadis.com stunnel[23421]: Certificate check failed: depth=0, /C=US/OU=Testing/O=Example.com/CN=test While the certificates are both self-signed, that should not cause an error. Removing the old certificate from the CAFile or moving it to the bottom of the file resolves the problem. (But of course then Certificate A is no longer trusted despite it appearing in the CAFile.) Is this expected behavior? It would be very helpful if stunnel could support two different certificates with the same Subject DN for these kinds of cert-rotation processes. The alternatives are to always use a new DN each time or to add/remove at the same time which makes rolling-back more difficult. Note that everything else about these certificates is different: serial number, fingerprint, generating-key, etc. It's only the Subject DN that is the same. This is stunnel 4.56 on x86_64-koji-linux-gnu platform, on Amazon Linux 2. Thanks! -chris

2 1

HELO handshake problem (?)
by Ducale Ducale 10 Apr '24

10 Apr '24

In a Windows 10 machine I'm using a tool (Netwrix Service Monitor) with a SMTP notification feature that doesn't support authentication, so I'm using Stunnel 5.72 as a local relay for SMTP2GO (smtp2go.com) with this configuration: [smtp2go] client = yes accept = 127.0.0.1:25 connect = mail.smtp2go.com:2525 protocol = smtp protocolAuthentication = plain protocolHost = cloud.mydomain.com protocolUsername = smtp2go(a)mydomain.com protocolPassword = P@ssw0rd debug = 7 I try both PLAIN and LOGIN as authentication mode, with this is error: LOGIN: " ... TLS connected: new session negotiated TLSv1.3 ciphersuite: TLS_AES_256_GCM_SHA384 (256-bit encryption) Peer temporary key: X25519, 253 bits Compression: null, expansion: null -> HELO cloud.mydomain.com <- 250 mail.smtp2go.com Hello cloud.mydomain.com [x.x.x.x] -> AUTH LOGIN <- 503 AUTH command used when not advertised Remote server does not support LOGIN authentication ... " PLAIN: " ... TLS connected: new session negotiated TLSv1.3 ciphersuite: TLS_AES_256_GCM_SHA384 (256-bit encryption) Peer temporary key: X25519, 253 bits Compression: null, expansion: null -> HELO cloud.mydomain.com <- 250 mail.smtp2go.com Hello cloud.mydomain.com [x.x.x.x] -> AUTH PLAIN ******************************************** <- 503 AUTH command used when not advertised PLAIN Authentication Failed Connection reset: 0 byte(s) sent to TLS, 0 byte(s) sent to socket Deallocating application specific data for session connect address ... " Can anyone help me solve this problem? Thanks!

3 3

help configuration for socks5 nordvpn requiring authentication
by Alberto P 10 Apr '24

10 Apr '24

Hello, I would like to use stunnel to use a socks5 server requiring user/pass authentication (nordvpn) with different clients that allow for a socks5 proxy but no authentication. Could someone help me with the configuration (linux or windows is good). In detail, I don't know how to provide user/pass to the configuration, and if it is actually feasible. Any help will be very appreciated !

1 1