May 2013 - stunnel-users

Stunnel 4 failing to connect to gmail
by Asif Iqbal 10 Dec '20

10 Dec '20

I am faling to connect to gmail. Not sure what that bind error means. iqbala@ghar:~$ sudo stunnel4 2008.12.15 13:53:17 LOG7[3839:3083650736]: Snagged 64 random bytes from /home/iqbala/.rnd 2008.12.15 13:53:17 LOG7[3839:3083650736]: Wrote 1024 new random bytes to /home/iqbala/.rnd 2008.12.15 13:53:17 LOG7[3839:3083650736]: RAND_status claims sufficient entropy for the PRNG 2008.12.15 13:53:17 LOG7[3839:3083650736]: PRNG seeded successfully 2008.12.15 13:53:17 LOG7[3839:3083650736]: Certificate: /etc/stunnel/stunnel.pem 2008.12.15 13:53:17 LOG7[3839:3083650736]: Certificate loaded 2008.12.15 13:53:17 LOG7[3839:3083650736]: Key file: /etc/stunnel/stunnel.pem 2008.12.15 13:53:17 LOG7[3839:3083650736]: Private key loaded 2008.12.15 13:53:17 LOG7[3839:3083650736]: SSL context initialized for service ssmtp 2008.12.15 13:53:17 LOG5[3839:3083650736]: stunnel 4.22 on i486-pc-linux-gnu with OpenSSL 0.9.8g 19 Oct 2007 2008.12.15 13:53:17 LOG5[3839:3083650736]: Threading:PTHREAD SSL:ENGINE Sockets:POLL,IPv6 Auth:LIBWRAP 2008.12.15 13:53:17 LOG6[3839:3083650736]: file ulimit = 1024 (can be changed with 'ulimit -n') 2008.12.15 13:53:17 LOG6[3839:3083650736]: poll() used - no FD_SETSIZE limit for file descriptors 2008.12.15 13:53:17 LOG5[3839:3083650736]: 500 clients allowed 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 10 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 11 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: FD 12 in non-blocking mode 2008.12.15 13:53:17 LOG7[3839:3083650736]: SO_REUSEADDR option set on accept socket 2008.12.15 13:53:17 LOG3[3839:3083650736]: Error binding ssmtp to 74.125.93.111:587 2008.12.15 13:53:17 LOG3[3839:3083650736]: bind: Cannot assign requested address (99) Here is how my conf file looks like iqbala@ghar:~$ cat /etc/stunnel/stunnel.conf | egrep -v "^;|^$" cert = /etc/stunnel/stunnel.pem foreground = yes sslVersion = SSLv3 chroot = /var/lib/stunnel4/ setuid = stunnel4 setgid = stunnel4 pid = /stunnel4.pid socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 debug = 7 output = /var/log/stunnel4/stunnel.log client = yes [ssmtp] accept = smtp.gmail.com:587 connect = 25 Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu

5 9

stunnel and hosts.allow
by Yousef Alhashemi 05 Jul '16

05 Jul '16

Hi, This may be a little bit off-topic, but does anyone here use stunnel with pan? My connections to stunnel (in pan) are always refused by libwrap. I was looking for the right rule to add to /etc/hosts.allow but nothing seems to work aside from "ALL : ALL" (which is obviously not good) and "nntps: KNOWN". Is the latter reasonable? The hosts_access(5) manpage is confusing to say the least. It mentions that daemon (the first token on any line) is the name of the daemon running the process, which would be "stunnel" in my case, but using "stunnel : LOCAL" or even "stunnel : ALL" doesn't work. The rule that seems to work, as mentioned, is "nntps : KNOWN" ("nntps" being the group name in stunnel.conf). What's even more confusing to me is that "nntps : LOCAL" does not work either. Nor does "nntps : localhost 127.0.0.1", "nntps : localhost", "nntps : 127.0.0.1", or "nntps : 192.168.1.". Pan is running on the same machine as stunnel so all connections must be coming from localhost. Why do these rules not trigger? Either way, I'd like to know the "least permissive" hosts.allow rule that would allow me to connect to my news provider from pan, and/or whether "nntps : KNOWN" is a safe option. Thanks, Yousef

3 6

x-forwarded-for.patch for stunnel 4.55/4.56
by Shannon Carver 17 May '13

17 May '13

Hi all, Just wondering if anyone know's a an xforwardedfor patch available for the latest versions of stunnel? Thanks Shannon Carver

2 1

Strange Stunnel crash (no errors, issues, anything)
by Alfred Kernaghan 16 May '13

16 May '13

Hi, Long time lurker, new poster though! I've got two servers running Stunnel v2.54 (yet to upgrade as I've been waiting for an x-forwardfor patch to become available). I noticed recently that one Stunnel nodes had exited, requiring a restart. I'm not sure if it's a co-incidence, but I've only just changed the cert on both installs last night. This, of course, is very concerning as it's only just become a problem, but being the core SSL endpoint, it knocks our server offline until it's restarted. Now comes the interesting bit, I've run the SSL Labs SSL Health check at https://www.ssllabs.com/ssltest/ just to see if anything comes out of it, and noticed that without fail every time it runs (and the first server is online) it'll know Stunnel offline as it goes through it's tests: *"Testing TLS v1.0...." "Testing TLS v1.2...."* *-- SERVER OFFLINE --* This was noticed by a fluke, but appears to happen every time I restart and then rerun the test. I'm not getting any segfaults, or errors from stunnel, and it only affects the one (primary) server. Can anyone shed any light as to what might be causing it, how I can get any more info out of stunnel, or better yet, fix it completely? Thanks all Alfie

2 2

Error with stunnel 4.56 on Ubuntu 12
by Laura Fried 12 May '13

12 May '13

I am getting a success with doing the configure, make and make install. However when I go to start up stunnel I get the following error message: Clients allowed=500 stunnel 4.56 on x86_64-unknown-linux-gnu platform Compiled/running with OpenSSL 1.0.1 14 Mar 2012 Threading:PTHREAD Sockets:POLL,IPv6 SSL:ENGINE,OCSP,FIPS Reading configuration from file /usr/local/etc/stunnel/stunnel.conf FIPS_mode_set: F06D065: error:0F06D065:common libcrypto routines:FIPS_mode_set:fips mode not supported Line 51: "[pop3s]": Failed to initialize SSL str_stats: 9 block(s), 163 data byte(s), 522 control byte(s) Any assistance would be greatly appreciated. -- Laura J. Fried

1 0

4.53 32-bit on Windows 2k8 R2 64bit
by Michael Curran 01 May '13

01 May '13

We are running stunnel and noticed an issue with what ended up being an issue creating a new thread due to running out of memory at 2gb - error (8) on create_client Are there any known issues with 4.53 around memory usage? We only terminate 2 ports against the installation 443 on 2 different interfaces / IP addresses and we ran into this issue with just under 5000 total connections We are not doing ECDH , but are using a 1024-bit param file

2 3

Problem with roundrobbin failover mode?
by Matt Wise 01 May '13

01 May '13

I've got dozens of clients connecting with Stunnel to a group of 5 servers. Each system has a config that looks like this: > cert = /etc/stunnel/zookeeper.pem > key = /etc/stunnel/zookeeper.key > CAfile = /etc/stunnel/zookeeper_ca.pem > verify = 2 > delay = yes > sslVersion = TLSv1 > client = yes > setuid = stunnel4 > setgid = stunnel4 > pid = /var/lib/stunnel4/zookeeper.stunnel4.pid > socket = l:TCP_NODELAY=1 > socket = r:TCP_NODELAY=1 > TIMEOUTconnect = 2 > session = 86400 > debug = 5 > [zookeeper] > accept = 127.0.0.1:2182 > failover = rr > connect = prod-zookeeper:2182 > connect = prod-zookeeper-1:2182 > connect = prod-zookeeper-2:2182 > connect = prod-zookeeper-3:2182 > connect = prod-zookeeper-4:2182 > connect = prod-zookeeper-5:2182 Essentially the first host is a load balancer, and the next 5 are the actual zookeeper hosts so that we can bypass the ELB if its giving us fits. Now what we're seeing is that almost every connection ends up on prod-zookeeper-5. Over and over and over again, our hosts pick the same system each time. We're running Stunnel 4.52: > Clients allowed=8000 > stunnel 4.52 on i486-pc-linux-gnu platform > Compiled/running with OpenSSL 0.9.8k 25 Mar 2009 > Threading:PTHREAD SSL:ENGINE Auth:LIBWRAP Sockets:POLL,IPv6 Any ideas what might be wrong here? Obviously we want the connections to be *roughly* random across the list of hosts... and if one of the hosts goes down, and the connection fails, we want the stunnel service to try again, and randomly pick a new host. It doesn't really seem to be doing that though. --Matt

3 8